TPS51124

Name: TPS51124
Brand: TI
SKU: TPS51124
Price: 2.069 USD

AKTIV

3-V- bis 28-V-Dual-Synchron-Abwärtsregler für niedrige Ausgangsspannungsschienen

Jetzt bestellen

Datenblatt

document-pdfAcrobat TPS51124 Dual Synchronous Step-Down Controller for Low-Voltage Power Rails datasheet (Rev. C) (Englisch) PDF | HTML

TPS51124

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Vin (min) (V)

3

Vin (max) (V)

28

Iout (max) (A)

15

Operating temperature range (°C)

-40 to 85

Control mode

D-CAP

Rating

Catalog

Vout (min) (V)

0.76

Vout (max) (V)

5.5

Iq (typ) (A)

0.00035

Duty cycle (max) (%)

88

Number of phases

1

Vin (min) (V)

3

Vin (max) (V)

28

Iout (max) (A)

15

Operating temperature range (°C)

-40 to 85

Control mode

D-CAP

Rating

Catalog

Vout (min) (V)

0.76

Vout (max) (V)

5.5

Iq (typ) (A)

0.00035

Duty cycle (max) (%)

88

Number of phases

1

VQFN (RGE)

24

16 mm² 4 x 4

High Efficiency, Low-Power Consumption, Shutdowns to <1 µA
Fixed Frequency Emulated On-Time Control, Frequency Selectable
From Three Options
D-CAP Mode Enables Fast Transient Response
Auto-Skip Mode
Less Than 1% Initial Reference Accuracy
Low Output Ripple
Wide Input Voltage Range: 3 V to 28 V
Output Voltage Range: 0.76 V to 5.5 V
Low-Side R_DS(ON) Loss-less Current Sensing
Adaptive Gate Drivers With Integrated Boost Diode
Internal 1.2-ms Voltage-Servo Soft-Start
Powergood Signals for Each Channel With Delay Timer
Output Discharge During Disable, Fault
APPLICATIONS
- Notebook I/O and Low-Voltage System Bus

All other trademarks are the property of their respective owners

High Efficiency, Low-Power Consumption, Shutdowns to <1 µA
Fixed Frequency Emulated On-Time Control, Frequency Selectable
From Three Options
D-CAP Mode Enables Fast Transient Response
Auto-Skip Mode
Less Than 1% Initial Reference Accuracy
Low Output Ripple
Wide Input Voltage Range: 3 V to 28 V
Output Voltage Range: 0.76 V to 5.5 V
Low-Side R_DS(ON) Loss-less Current Sensing
Adaptive Gate Drivers With Integrated Boost Diode
Internal 1.2-ms Voltage-Servo Soft-Start
Powergood Signals for Each Channel With Delay Timer
Output Discharge During Disable, Fault
APPLICATIONS
- Notebook I/O and Low-Voltage System Bus

All other trademarks are the property of their respective owners

The TPS51124 is a dual, adaptive on-time D-CAP™ mode synchronous buck controller. The part enables system designers to cost effectively complete the suite of notebook power bus regulators with the absolute lowest external component count and lowest standby consumption. The fixed frequency emulated adaptive on-time control supports seamless operation between PWM mode at heavy load condition and reduced frequency operation at light load for high efficiency down to milliampere range. The main control loop for the TPS51124 uses the D-CAP mode that optimized for low ESR output capacitors such as POSCAP or SP-CAP promises fast transient response with no external compensation. Simple and separate power good signals for each channel allow flexibility of power sequencing. The part provides a convenient and efficient operation with supply input voltages (V5IN, V5FILT) ranging from 4.5 V to 5.5 V, conversion voltages (drain voltage for the synchronous high-side MOSFET) from 3 V to 28 V and output voltages from 0.76 V to 5.5 V.

The TPS51124 is available in 24-pin VQFN package specified from –40°C to 85°C ambient temperature range.

The TPS51124 is a dual, adaptive on-time D-CAP™ mode synchronous buck controller. The part enables system designers to cost effectively complete the suite of notebook power bus regulators with the absolute lowest external component count and lowest standby consumption. The fixed frequency emulated adaptive on-time control supports seamless operation between PWM mode at heavy load condition and reduced frequency operation at light load for high efficiency down to milliampere range. The main control loop for the TPS51124 uses the D-CAP mode that optimized for low ESR output capacitors such as POSCAP or SP-CAP promises fast transient response with no external compensation. Simple and separate power good signals for each channel allow flexibility of power sequencing. The part provides a convenient and efficient operation with supply input voltages (V5IN, V5FILT) ranging from 4.5 V to 5.5 V, conversion voltages (drain voltage for the synchronous high-side MOSFET) from 3 V to 28 V and output voltages from 0.76 V to 5.5 V.

The TPS51124 is available in 24-pin VQFN package specified from –40°C to 85°C ambient temperature range.

open-in-new

Andere AC/DC & DC/DC controllers (external FET) suchen

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star

=Von TI ausgewählte Top-Empfehlungen für dieses Produkt

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.

Alle anzeigen 4

	Typ	Titel		Datum
*	Data sheet	TPS51124 Dual Synchronous Step-Down Controller for Low-Voltage Power Rails datasheet (Rev. C)	PDF \| HTML	31 Dez 2014
	User guide	TPS51124 Buck Controller Evaluation Module User's Guide (Rev. B)	PDF \| HTML	03 Mär 2022
	Application note	Intel Core i3, i5, i7 [Arrandale] Reference Design		21 Jul 2010
	Application note	Adaptive Constant On-Time (D-CAPTM) Control Study in Notebook Applications (Rev. B)		04 Dez 2007

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.