TPS54627

Name: TPS54627
Brand: TI
SKU: TPS54627
Price: 1.968 USD

AKTIV

Synchroner 6-A-Abwärtswandler von 4,5 V bis 18 V im HTSSOP-Gehäuse

Jetzt bestellen

Datenblatt

document-pdfAcrobat TPS54627 4.5-V to 18-V Input, 6-A Synchronous Step-Down Converter datasheet (Rev. B) (Englisch) PDF | HTML

Eine neuere Version dieses Produkts ist verfügbar

open-in-new

Alternativen vergleichen

Dieses Produkt ist weiterhin für Bestandskunden erhältlich. Neue Designs sollten ein alternatives Produkt erwägen.

Selbe Funktionalität wie der verglichene Baustein bei abweichender Anschlussbelegung

TPS566238

AKTIV

Synchroner SWIFT™-Abwärtswandler für 3 bis 18 V Eingangsspannung, Spannungsmodus, 6 A, mit erzwungen Higher efficiency converter in a smaller package.

TPS54627

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Rating

Catalog

Operating temperature range (°C)

-40 to 85

Topology

Buck

Type

Converter

Iout (max) (A)

6

Vin (min) (V)

4.5

Vin (max) (V)

18

Switching frequency (min) (kHz)

650

Switching frequency (max) (kHz)

650

Features

Enable, Soft Start Adjustable, Synchronous Rectification

Control mode

D-CAP2

Vout (min) (V)

0.76

Vout (max) (V)

5.5

Iq (typ) (µA)

950

Duty cycle (max) (%)

65

Rating

Catalog

Operating temperature range (°C)

-40 to 85

Topology

Buck

Type

Converter

Iout (max) (A)

6

Vin (min) (V)

4.5

Vin (max) (V)

18

Switching frequency (min) (kHz)

650

Switching frequency (max) (kHz)

650

Features

Enable, Soft Start Adjustable, Synchronous Rectification

Control mode

D-CAP2

Vout (min) (V)

0.76

Vout (max) (V)

5.5

Iq (typ) (µA)

950

Duty cycle (max) (%)

65

HSOIC (DDA)

8

29.4 mm² 4.9 x 6

D-CAP2™ Mode Enables Fast Transient Response
Low-Output Ripple and Allows Ceramic Output Capacitor
Wide V_IN Input-Voltage Range: 4.5 V to 18 V
Output-Voltage Range: 0.76 V to 5.5 V
Highly Efficient Integrated FETs Optimized for Lower Duty-Cycle Applications
- 36 mΩ (High-Side) and 28 mΩ (Low-Side)
High Efficiency, Less Than 10 µA at Shutdown
High Initial Bandgap-Reference Accuracy
Adjustable Soft Start
Prebiased Soft Start
650-kHz Switching Frequency
Cycle-by-Cycle Overcurrent Limit

D-CAP2™ Mode Enables Fast Transient Response
Low-Output Ripple and Allows Ceramic Output Capacitor
Wide V_IN Input-Voltage Range: 4.5 V to 18 V
Output-Voltage Range: 0.76 V to 5.5 V
Highly Efficient Integrated FETs Optimized for Lower Duty-Cycle Applications
- 36 mΩ (High-Side) and 28 mΩ (Low-Side)
High Efficiency, Less Than 10 µA at Shutdown
High Initial Bandgap-Reference Accuracy
Adjustable Soft Start
Prebiased Soft Start
650-kHz Switching Frequency
Cycle-by-Cycle Overcurrent Limit

The TPS54627 device is an adaptive on-time D-CAP2 mode synchronous-buck converter. The TPS54627 enables system designers to complete the suite of various end-equipment power-bus regulators with a cost-effective, low-component count, low-standby current solution.

The main control loop for the TPS54627 uses the D-CAP2 mode control that provides a fast transient response with no external compensation components. The TPS54627 also has a proprietary circuit that enables the device to adopt to both low equivalent-series-resistance (ESR) output capacitors, such as POSCAP or SP-CAP, and ultra-low ESR ceramic capacitors.

The device operates from 4.5-V to 18-V VIN input. The output voltage can be programmed between 0.76 V and 5.5 V. The device also features an adjustable soft-start time. The TPS54627 is available in the 8-pin SO PowerPAD package, and designed to operate from –40°C to 85°C.

The TPS54627 device is an adaptive on-time D-CAP2 mode synchronous-buck converter. The TPS54627 enables system designers to complete the suite of various end-equipment power-bus regulators with a cost-effective, low-component count, low-standby current solution.

The main control loop for the TPS54627 uses the D-CAP2 mode control that provides a fast transient response with no external compensation components. The TPS54627 also has a proprietary circuit that enables the device to adopt to both low equivalent-series-resistance (ESR) output capacitors, such as POSCAP or SP-CAP, and ultra-low ESR ceramic capacitors.

The device operates from 4.5-V to 18-V VIN input. The output voltage can be programmed between 0.76 V and 5.5 V. The device also features an adjustable soft-start time. The TPS54627 is available in the 8-pin SO PowerPAD package, and designed to operate from –40°C to 85°C.

filter

Andere AC/DC- und DC/DC-Wandler (integrierter FET) suchen

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star

=Von TI ausgewählte Top-Empfehlungen für dieses Produkt

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.

Alle anzeigen 3

	Typ	Titel		Datum
*	Data sheet	TPS54627 4.5-V to 18-V Input, 6-A Synchronous Step-Down Converter datasheet (Rev. B)	PDF \| HTML	23 Dez 2016
	EVM User's guide	TPS54627 Step-Down Converter Evaluation Module User's Guide (Rev. A)	PDF \| HTML	23 Aug 2021
	Application note	Optimize Output Filter on D-CAP2 for Stability Improvement		13 Jun 2017

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

TPS54627EVM-052 — Evaluierungsmodul für synchronen Abwärtswandler mit TPS54627 6 A

The Texas Instruments TPS54627EVM-052 evaluation module is a fully assembled and tested circuit for evaluating the TPS54627 4.5-V to 18-V input, 1.05-V output, 6-A synchronous converter.

Benutzerhandbuch: PDF | HTML