CSD18563Q5A
- Ultra-Low Qg and Qgd
- Soft Body Diode for Reduced Ringing
- Low Thermal Resistance
- Avalanche Rated
- Logic Level
- Pb-Free Terminal Plating
- RoHS Compliant
- Halogen Free
- SON 5 mm × 6 mm Plastic Package
This 5.7 mΩ, 60 V SON 5 mm × 6 mm NexFET power MOSFET was designed to pair with the CSD18537NQ5A control FET and act as the sync FET for a complete industrial buck converter chipset solution.
您可能會感興趣的類似產品
功能相似於所比較的產品
技術文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 11 設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
開發板
TPS40170EVM-597 — 具有 NexFET™ 的 TPS40170 同步 PWM 降壓控制器評估模組
The TPS40170EVM-597 is a fully assembled and tested circuit for evaluating the TPS40170 synchronous step-down controller with two NexFET devices CSD18537NQ5A and CSD18563Q5A. The TPS40170EVM-597 operates from a 10V to 36V input (24V nominal) and provides a 5V output up to 10A.
使用指南: PDF
支援軟體
Quickly trade off size, cost and performance to select the optimal MOSFET based on application conditions.
支援軟體
NONSYNC-BOOST-FET-LOSS-CALC — NONSYNC BOOST FET LOSS Calculator
MOSFET power loss calculator for non-synchronous boost converter
支援產品和硬體
產品
MOSFET
計算工具
MOTOR-DRIVE-FET-LOSS-CALC — Power Loss Calculation Tool for BLDC Motor Drive
This is an Excel-based MOSFET power loss calculator for brushless DC motor drive applications.
支援產品和硬體
產品
MOSFET
軟體
計算工具
計算工具
SLPR053 — Power Loss Calculation Tool for Synchronous Inverting Buck Boost Converter
支援產品和硬體
產品
MOSFET
計算工具
SYNC-BOOST-FET-LOSS-CALC — Power Loss Calculation Tool for Synchronous Boost Converter
MOSFET power loss calculator for synchronous boost converter applications.
支援產品和硬體
產品
MOSFET
計算工具
SYNC-BUCK-FET-LOSS-CALC — Power Loss Calculation Tool for Synchronous Buck Converter
Quickly trade off size, cost and performance to select the optimal MOSFET based on application conditions.
支援產品和硬體
產品
MOSFET
計算工具
SYNC-RECT-FET-LOSS-CALC — 適用同步整流的功率損耗計算工具
MOSFET power loss calculator for synchronous rectifier applications
參考設計
PMP10852 — 高功率小型同步降壓至輸出 12V@15A 參考設計
The PMP10852 reference design uses the LM5117, CSD18563 for the high side MOSFET and CSD18532 (x2) for the low side MOSFETs. PMP10852 takes input voltages between 27V to 41V and outputs 180W(12V @15A). The size is very small, total area is 1,200mm2 (30mm x 40mm) solution size. The (...)
參考設計
TIDA-01095 — 具有日光採集和無線連線功能的 100W 可調光 DC-DC LED 驅動器參考設計
This reference design is a tested DC/DC LED driver for high power and high-efficiency dimmable LED luminaires. It is built on a wireless SoC platform which can enable intensity adjustment through analog, PWM dimming and control using any BLE smart device or ZigBee. High bay and low bay LED (...)
參考設計
TIDA-01179 — 具有冷起動運作和瞬態保護功能的車用寬輸入電壓前端電源參考設計
The TIDA-01179 reference design is an automotive front-end power supply that is able to supply 30W maximum output for the 12V car battery. The first stage is a buck-boost DC/DC converter that maintains a stable 15V output voltage over the full DC range of the 12V battery conditions specified in ISO (...)
參考設計
PMP10650 — 適用於無人機主輔助電源和備用輔助電源的高密度效率解決方案
PMP10650 is a high power density 40W Buck Converter design optimized for Wide Vin Drone Design using the LM3150 controller IC (Used for Drone’s Backup Power) and LM53603. The design accepts an input voltage of 7Vin to 36Vin and provides the outputs of 5V@5A for Drone’s Backup power and (...)
參考設計
TIDA-00675 — 使用動態切換的功率降低參考設計
The TIDA-00675 shows the power reduction benefits of dynamically switching a load on/off using a load switch. The design guide shows how frequency of switching, duty cycle, and the use of a discharge resistor can have an impact on power consumption.
參考設計
PMP10324 — 38V@2A 同步升壓參考設計
The PMP10324 sync-boost reference design provides 38V @ 2A over a wide input range covering the 24V rail. It uses dual external FETs to achieve a full load efficiency of 97% at 24Vin. This design uses minimal footprint parts with all ceramic capacitors.
參考設計
PMP10081 — 20W SEPIC 低成本鉛酸電池充電器參考設計
The PMP10081 reference design shows a simple and low-cost solution of a lead acid battery charger. The input voltage range is from 9V to 36V and the maximum output voltage is 13.8V, which is sufficient for a six-cell lead acid battery with a charge current up to 1.5A.
參考設計
PMP10852B — 高功率小型同步降壓至輸出 12V@15A 參考設計
The PMP10852B reference design uses the LM5117, CSD18563 for the high side MOSFET and CSD18532 (x2) for the low side MOSFETs. PMP10852B takes input voltages between 27V to 41V and outputs 180W(12V @15A). The size is very small, total area is 1,200mm2 (30mm x 40mm) solution size. The (...)
封裝 | 引腳 | 下載 |
---|---|---|
VSONP (DQJ) | 8 | 檢視選項 |
訂購與品質
內含資訊:
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 資格摘要
- 進行中可靠性監測
內含資訊:
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。