SLLSEV0E November   2017  – March 2021 TCAN1043-Q1 , TCAN1043G-Q1 , TCAN1043H-Q1 , TCAN1043HG-Q1

PRODUCTION DATA  

  1. Features
  2. Applications
  3. Description
  4. Revision History
  5. Description (continued)
  6. Pin Configuration and Functions
  7. Specifications
    1. 7.1 Absolute Maximum Ratings
    2. 7.2 ESD Ratings
    3. 7.3 ESD Ratings IEC Specification
    4. 7.4 Recommended Operating Conditions
    5. 7.5 Thermal Information
    6. 7.6 Dissipation Ratings
    7. 7.7 Electrical Characteristics
    8. 7.8 Switching Characteristics
    9. 7.9 Typical Characteristics
  8. Parameter Measurement Information
  9. Detailed Description
    1. 9.1 Overview
    2. 9.2 Functional Block Diagram
    3. 9.3 Feature Description
      1. 9.3.1 Internal and External Indicator Flags (nFAULT and RXD)
      2. 9.3.2 Power-Up Flag (PWRON)
      3. 9.3.3 Wake-Up Request Flag (WAKERQ)
      4. 9.3.4 Wake-Up Source Recognition Flag (WAKESR)
      5. 9.3.5 Undervoltage Fault Flags
        1. 9.3.5.1 Undervoltage on VCC Fault
        2. 9.3.5.2 Undervoltage on VIO Fault
        3. 9.3.5.3 Undervoltage on VSUP Fault
      6. 9.3.6 CAN Bus Failure Fault Flag
      7. 9.3.7 Local Faults
        1. 9.3.7.1 TXD Dominant Timeout (TXD DTO)
        2. 9.3.7.2 TXD Shorted to RXD Fault
        3. 9.3.7.3 CAN Bus Dominant Fault
        4. 9.3.7.4 Thermal Shutdown (TSD)
        5. 9.3.7.5 RXD Recessive Fault
        6. 9.3.7.6 Undervoltage Lockout (UVLO)
        7. 9.3.7.7 Unpowered Device
        8. 9.3.7.8 Floating Terminals
        9. 9.3.7.9 CAN Bus Short Circuit Current Limiting
    4. 9.4 Device Functional Modes
      1. 9.4.1 CAN Bus States
      2. 9.4.2 Normal Mode
      3. 9.4.3 Silent Mode
      4. 9.4.4 Standby Mode
      5. 9.4.5 Go-to-Sleep Mode
      6. 9.4.6 Sleep Mode with Remote Wake and Local Wake Up Requests
        1. 9.4.6.1 Remote Wake Request via Wake Up Pattern (WUP)
        2. 9.4.6.2 Local Wake Up (LWU) via WAKE Input Terminal
      7. 9.4.7 Driver and Receiver Function Tables
      8. 9.4.8 Digital Inputs and Outputs
      9. 9.4.9 INH (Inhibit) Output
  10. 10Application Information Disclaimer
    1. 10.1 Application Information
    2. 10.2 Typical Application
      1. 10.2.1 Design Requirements
        1. 10.2.1.1 Bus Loading, Length and Number of Nodes
      2. 10.2.2 Detailed Design Procedures
        1. 10.2.2.1 CAN Termination
      3. 10.2.3 Application Curves
  11. 11Power Supply Recommendations
  12. 12Layout
    1. 12.1 Layout
      1. 12.1.1 Layout Guidelines
    2. 12.2 Layout Example
  13. 13Device and Documentation Support
    1. 13.1 Related Links
    2. 13.2 Receiving Notification of Documentation Updates
    3. 13.3 Community Resources
    4. 13.4 Trademarks
  14. 14Mechanical, Packaging, and Orderable Information

Package Options

Refer to the PDF data sheet for device specific package drawings

Mechanical Data (Package|Pins)
  • D|14
  • DMT|14
Thermal pad, mechanical data (Package|Pins)
Orderable Information

Wake-Up Source Recognition Flag (WAKESR)

This flag is an internal and external flag that is set high or low after a valid local wake up (LWU) request occurs, or a valid remote wake request occurs. This flag is only available in Normal mode before four recessive to dominant transitions occur on TXD. If the nFAULT pin is high after entering normal mode, this indicates that a remote wake request was received. If the nFAULT output is low after entering Normal mode, this indicates that a local wake up event occurred. Upon power up on VSUP, or after and under voltage event on VSUP, the local wake up request is indicated on nFAULT.