SLLSFB2A April   2020  – June 2026 TUSB1146

PRODUCTION DATA  

  1.   1
  2. 1 Features
  3. 2 Applications
  4. 3 Description
  5. 4  TUSB1146 Pin Configuration and Functions
  6. 5 Specifications
    1. 5.1  Absolute Maximum Ratings
    2. 5.2  ESD Ratings
    3. 5.3  Recommended Operating Conditions
    4. 5.4  Thermal Information
    5. 5.5  Power Supply Characteristics
    6. 5.6  Control I/O DC Electrical Characteristics
    7. 5.7  USB and DP Electrical Characteristics
    8. 5.8  DCI Electrical Characteristics
    9. 5.9  Timing Requirements
    10. 5.10 Switching Characteristics
    11. 5.11 Typical Characteristics
  7. 6 Parameter Measurement Information
  8. 7 Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagram
    3. 7.3 Feature Description
      1. 7.3.1 USB 3.1
      2. 7.3.2 DisplayPort
      3. 7.3.3 4-level Inputs
      4. 7.3.4 Receiver Linear Equalization
    4. 7.4 Device Functional Modes
      1. 7.4.1 Device Configuration in GPIO Mode
      2. 7.4.2 Device Configuration In I2C Mode
      3. 7.4.3 DisplayPort Mode
      4. 7.4.4 Linear EQ Configuration
      5. 7.4.5 VOD modes
        1. 7.4.5.1 Linearity VOD
        2. 7.4.5.2 Limited VOD
      6. 7.4.6 Transmit Equalization
      7. 7.4.7 USB3.1 Modes
      8. 7.4.8 Downstream Facing Port Adaptive Equalization
        1. 7.4.8.1 Fast Adaptive Equalization in I2C Mode
        2. 7.4.8.2 Full Adaptive Equalization
    5. 7.5 Programming
      1. 7.5.1 Transition between Modes
      2. 7.5.2 Pseudocode Examples
        1. 7.5.2.1 Fast AEQ with linear redriver mode
        2. 7.5.2.2 Fast AEQ with limited redriver mode
        3. 7.5.2.3 Full AEQ with linear redriver mode
        4. 7.5.2.4 Full AEQ with limited redriver mode
      3. 7.5.3 TUSB1146 I2C Address Options
      4. 7.5.4 TUSB1146 I2C Slave Behavior
  9. 8 Registers
    1. 8.1 Register Maps
      1. 8.1.1 TUSB1146 Registers
        1. 8.1.1.1  General_1 Register (Offset = 0xA) [reset = 0x1]
        2. 8.1.1.2  DCI_TXEQ_CTRL Register (Offset = 0xB) [reset = 0x6C]
        3. 8.1.1.3  DP01EQ_SEL Register (Offset = 0x10) [reset = 0x0]
        4. 8.1.1.4  DP23EQ_SEL Register (Offset = 0x11) [reset = 0x0]
        5. 8.1.1.5  DisplayPort_1 Register (Offset = 0x12) [reset = 0x0]
        6. 8.1.1.6  DisplayPort_2 Register (Offset = 0x13) [reset = 0x0]
        7. 8.1.1.7  AEQ_CONTROL1 Register (Offset = 0x1C) [reset = 0xF0]
        8. 8.1.1.8  AEQ_CONTROL2 Register (Offset = 0x1D) [reset = 0x20]
        9. 8.1.1.9  AEQ_LONG Register (Offset = 0x1E) [reset = 0x77]
        10. 8.1.1.10 USBC_EQ Register (Offset = 0x20) [reset = 0x0]
        11. 8.1.1.11 SS_EQ Register (Offset = 0x21) [reset = 0x0]
        12. 8.1.1.12 USB3_MISC Register (Offset = 0x22) [reset = 0x44]
        13. 8.1.1.13 USB_STATUS Register (Offset = 0x24) [reset = 0x41]
        14. 8.1.1.14 VOD_CTRL Register (Offset = 0x32) [reset = 0x40]
        15. 8.1.1.15 AEQ_STATUS Register (Offset = 0x3B) [reset = 0x0]
  10. 9 Application and Implementation
    1. 9.1 Application Information
    2. 9.2 Typical Application
      1. 9.2.1 Design Requirements
      2. 9.2.2 Detailed Design Procedure
        1. 9.2.2.1 USB and DP Upstream Facing Port (USB Host / DP GPU to USB-C receptacle) Configuration
        2. 9.2.2.2 USB Downstream Facing Port (USB-C receptacle to USB Host) Configuration
          1. 9.2.2.2.1 Fixed Equalization
          2. 9.2.2.2.2 Fast Adaptive Equalization
          3. 9.2.2.2.3 Full Adaptive Equalization
      3. 9.2.3 Application Curve
    3. 9.3 System Examples
      1. 9.3.1 USB 3.1 Only
      2. 9.3.2 USB 3.1 and 2 Lanes of DisplayPort
      3. 9.3.3 DisplayPort Only
  11. 10Power Supply Recommendations
  12. 11Layout
    1. 11.1 Layout Guidelines
    2. 11.2 Layout Example
  13. 12Device and Documentation Support
    1. 12.1 Receiving Notification of Documentation Updates
    2. 12.2 Support Resources
    3. 12.3 Trademarks
    4. 12.4 Electrostatic Discharge Caution
    5. 12.5 Glossary
  14. 13Revision History
  15. 14Mechanical, Packaging, and Orderable Information

8.1.1 TUSB1146 Registers

Table 8-1 lists the TUSB1146 registers. All register offset addresses not listed in Table 8-1 should be considered as reserved locations and the register contents should not be modified.

Table 8-1 TUSB1146 Registers
OffsetAcronymRegister NameSection
0xAGeneral_1General RegisterGo
0xBDCI_TXEQ_CTRLDCI and TX EQ ControlGo
0x10DP01EQ_SELDisplayPort Lane 0 and 1 EQ ControlGo
0x11DP23EQ_SELDisplayPort Lane 2 and 3 EQ ControlGo
0x12DisplayPort_1AUX Snoop StatusGo
0x13DisplayPort_2DP Lane Enable/Disable ControlGo
0x1CAEQ_CONTROL1AEQ ControlsGo
0x1DAEQ_CONTROL2AEQ ControlsGo
0x1EAEQ_LONGAEQ setting for Long channelGo
0x20USBC_EQEQ control for RX1 and RX2 receiversGo
0x21SS_EQEQ Control for SSTX receiverGo
0x22USB3_MISCMisc USB3 ControlsGo
0x24USB_STATUSUSB state machine statusGo
0x32VOD_CTRLVOD Linearity and AEQ ControlsGo
0x3BAEQ_STATUSFull and Fast AEQ statusGo

Complex bit access types are encoded to fit into small table cells. Table 8-2 shows the codes that are used for access types in this section.

Table 8-2 TUSB1146 Access Type Codes
Access TypeCodeDescription
Read Type
RRRead
RHR
H		Read
Set or cleared by hardware
Write Type
WWWrite
W1SW
1S		Write
1 to set
WSWWrite
Reset or Default Value
-nValue after reset or the default value