SLVUD37 December   2024 TPS62968

 

  1.   1
  2.   Description
  3.   Features
  4.   Applications
  5.   5
  6. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
    5. 1.5 Cautions and Warnings
  7. 2Hardware
    1. 2.1 Setup
      1. 2.1.1 Input and Output Connector Descriptions
  8. 3Implementation Results
    1. 3.1 Test Results
    2. 3.2 Ripple Measurement Setup
    3. 3.3 Modifications
      1. 3.3.1 Input and Output Capacitors
      2. 3.3.2 Configurable Enable Threshold Voltage
      3. 3.3.3 NR/SS Capacitor
      4. 3.3.4 Feedforward Capacitor
      5. 3.3.5 S-CONF Resistor
      6. 3.3.6 Loop Response Measurement
      7. 3.3.7 Single LC Filter Operation
    4. 3.4 Performance Specification
  9. 4Hardware Design Files
    1. 4.1 Schematic
    2. 4.2 PCB Layout
    3. 4.3 Bill of Materials
  10. 5Additional Information
    1. 5.1 Trademarks

4.2 PCB Layout

This section provides the EVM board layout and illustrations in Figure 4-2 through Figure 4-5. The Gerber files are available on the TPS62968EVM product page.

TPS62968EVM Top LayerFigure 4-2 Top Layer
TPS62968EVM Internal Layer 2Figure 4-4 Internal Layer 2
TPS62968EVM Internal Layer 1 Figure 4-3 Internal Layer 1
TPS62968EVM Bottom Layer (Mirrored)Figure 4-5 Bottom Layer (Mirrored)