SLVUD73 April   2025 TPS7H3014-SEP , TPS7H3014-SP

 

  1.   1
  2.   Description
  3.   Features
  4.   4
  5. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
      1. 1.3.1 Alternate Board Configurations
    4. 1.4 Device Information
  6. 2Hardware
    1. 2.1 Power Requirements
    2. 2.2 Important Usage Notes
    3. 2.3 Connector Descriptions
  7. 3Implementation Results
    1. 3.1 Default Configuration Results
    2. 3.2 Sequence UP and DOWN Thresholds
    3. 3.3 Delay Timer
    4. 3.4 Regulation Timer
    5. 3.5 Disabled Channels
    6. 3.6 Externally Induced System RESET
  8. 4Hardware Design Files
    1. 4.1 Schematic
    2. 4.2 PCB Layout
    3. 4.3 Bill of Materials (BOM)
  9. 5Compliance Information
    1. 5.1 Compliance and Certifications
  10. 6Related Documentation

3.2 Sequence UP and DOWN Thresholds

VIN>10.2V initiates sequence UP. EN1 goes HIGH after DLY_TMR (12.35ms) expires.

TPS7H3014EVM VIN Rising, Initiate Sequence UPFigure 3-1 VIN Rising, Initiate Sequence UP

VIN<6V initiates sequence DOWN. EN2 goes LOW after DLY_TMR (12.35ms) expires.

TPS7H3014EVM VIN Falling, Initiate Sequence DOWNFigure 3-2 VIN Falling, Initiate Sequence DOWN