SLVUDJ8 April   2026

 

  1.   1
  2.   Description
  3.   Get Started
  4.   Features
  5.   Applications
  6.   6
  7. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
  8. 2Hardware
    1. 2.1 Connector and Test Point Descriptions
    2. 2.2 Jumper Configuration
      1. 2.2.1 J5 (ENABLE)
      2. 2.2.2 J6 (MODE)
      3. 2.2.3 J7 (I2C Target Address Selection)
    3. 2.3 Test Procedure
  9. 3Software
    1. 3.1 Software User Interface
      1. 3.1.1 Install USB2ANY Explorer
      2. 3.1.2 GUI Installation
      3. 3.1.3 Interface Hardware Setup
      4. 3.1.4 User Interface Operation
      5. 3.1.5 Register Map Screen
  10. 4Hardware Design Files
    1. 4.1 Schematic
    2. 4.2 PCB Layouts
    3. 4.3 Bill of Materials
  11. 5Additional Information
    1. 5.1 Trademarks

4.2 PCB Layouts

TPS61371EVM TPS61371EVM-155 Top-Side LayoutFigure 4-2 TPS61371EVM-155 Top-Side Layout
TPS61371EVM TPS61371EVM-155 Inner Layer1Figure 4-3 TPS61371EVM-155 Inner Layer1
TPS61371EVM TPS61371EVM-155 Inner Layer2Figure 4-4 TPS61371EVM-155 Inner Layer2
TPS61371EVM TPS61371EVM-155 Bottom-Side LayoutFigure 4-5 TPS61371EVM-155 Bottom-Side Layout