SPRUJB5 February   2024 AM67 , AM67A , TDA4AEN-Q1 , TDA4VEN-Q1

 

  1.   1
  2.   Description
  3.   Get Started
  4.   Features
  5.   Applications
  6.   6
  7. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Device Information
    4. 1.4 Specification
  8. 2Hardware
    1. 2.1 Key Features and Interfaces
    2. 2.2 Power On/Off Procedure
    3. 2.3 Power Input
      1. 2.3.1 Power Input
      2. 2.3.2 Power Budget Considerations
    4. 2.4 User Inputs and Settings
      1. 2.4.1 Boot Configuration Settings
      2. 2.4.2 Board Configuration Settings
      3. 2.4.3 Reset Pushbutton
      4. 2.4.4 User Pushbutton And LEDs
    5. 2.5 Standard Interfaces
      1. 2.5.1 Audio Input/Output
      2. 2.5.2 DisplayPort and HDMI
      3. 2.5.3 Gigabit Ethernet
      4. 2.5.4 JTAG and Emulation
      5. 2.5.5 MicroSD Card Cage
      6. 2.5.6 PCIe Card Module
      7. 2.5.7 UARTs for Terminal and Logging
      8. 2.5.8 USB Interfaces
    6. 2.6 Expansion Interfaces
      1. 2.6.1 Camera Interface, 22-Pin Flex
      2. 2.6.2 Camera Interface, 40-Pin Expansion
      3. 2.6.3 CAN-Bus Interface
      4. 2.6.4 DSI Display Interface
      5. 2.6.5 OLDI/LVDS Display Interface
      6. 2.6.6 User Expansion Header
    7. 2.7 Circuit Details
      1. 2.7.1 Interface Mapping
      2. 2.7.2 I2C Address Mapping
      3. 2.7.3 GPIO Mapping
      4. 2.7.4 I2C GPIO Expander Mapping
      5. 2.7.5 Power Monitoring
      6. 2.7.6 Identification EEPROM
      7. 2.7.7 Memory and Storage
      8. 2.7.8 Power Distribution
  9. 3Hardware Design Files
    1. 3.1 Schematics
    2. 3.2 PCB Layouts
    3. 3.3 Bill of Materials (BOM)
  10. 4Compliance Information
    1. 4.1 Thermal Compliance
    2. 4.2 EMC, EMI, and ESD Compliance
  11. 5Additional Information
    1. 5.1 Known Hardware or Software Issues
    2. 5.2 Trademarks

2.3.2 Power Budget Considerations

The exact power required for the EVM is largely dependent on the application, usage of the on-board peripherals, and power needs of add-on devices. The table below shows the power estimates the EVM can support. Again, the input supply must be capable of supplying the power needs for your application and your connected peripherals.

Table 2-2 Power Supply Allocation
FunctionPowerDescription
Processor coreUp to 15WProcessor, Memory
On-board peripheralsUp to 3WSD card, Ethernet, Logic
USB portsUp to 22W

USB Hub

Type A Ports (2.8A at 5V)

Type C Port (1.5A at 5V)

PCIe portUp to 25WPCIe Card Slot (2A at 12V, 3A at 3.3V)
Camera portsUp to 3WCam Ports (1A at 3.3V)
DisplaysUp to 3W

DP, HDMI Transceivers

HDMI Panel (55mA at 5V)

DP Panel (0.5A at 3.3V)

Expansion interfacesUp to 15W

40p Expansion (2A at 3.3V, 1.5A at 5V)