DS90CP22

AKTIV

800-Mbps-2x2-LVDS-Koppelpunktschalter

Jetzt bestellen

Datenblatt

document-pdfAcrobat DS90CP22 800 Mbps 2x2 LVDS Crosspoint Switch datasheet (Rev. E) (Englisch)

DS90CP22

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Function

Crosspoint

Protocols

LVDS, LVPECL

Number of transmitters

2

Number of receivers

2

Signaling rate (Mbps)

800

Input signal

CML, LVDS, LVPECL

Output signal

LVDS

Rating

Catalog

Operating temperature range (°C)

-40 to 85

Function

Crosspoint

Protocols

LVDS, LVPECL

Number of transmitters

2

Number of receivers

2

Signaling rate (Mbps)

800

Input signal

CML, LVDS, LVPECL

Output signal

LVDS

Rating

Catalog

Operating temperature range (°C)

-40 to 85

SOIC (D)

16

59.4 mm² (9.9 mm × 6 mm)

TSSOP (PW)

16

32 mm² (5 mm × 6.4 mm)

DC - 800 Mbps Low Jitter, Low Skew Operation
65 ps (typ) of Pk-Pk Jitter with PRBS = 2²³−1 Data Pattern at 800 Mbps
Single +3.3 V Supply
Less than 330 mW (typ) Total Power Dissipation
Non-Blocking "'Switch Architecture"'
Balanced Output Impedance
Output Channel-to-Channel Skew is 35 ps (typ)
Configurable as 2:1 mux, 1:2 demux, Repeater or 1:2 Signal Splitter
LVDS Receiver Inputs Accept LVPECL Signals
Fast Switch Time of 1.2ns (typ)
Fast Propagation Delay of 1.3ns (typ)
Receiver Input Threshold < ±100 mV
Available in 16 Lead TSSOP and SOIC Packages
Conforms to ANSI/TIA/EIA-644-1995 LVDS Standard
Operating Temperature: −40°C to +85°C

All trademarks are the property of their respective owners.

DC - 800 Mbps Low Jitter, Low Skew Operation
65 ps (typ) of Pk-Pk Jitter with PRBS = 2²³−1 Data Pattern at 800 Mbps
Single +3.3 V Supply
Less than 330 mW (typ) Total Power Dissipation
Non-Blocking "'Switch Architecture"'
Balanced Output Impedance
Output Channel-to-Channel Skew is 35 ps (typ)
Configurable as 2:1 mux, 1:2 demux, Repeater or 1:2 Signal Splitter
LVDS Receiver Inputs Accept LVPECL Signals
Fast Switch Time of 1.2ns (typ)
Fast Propagation Delay of 1.3ns (typ)
Receiver Input Threshold < ±100 mV
Available in 16 Lead TSSOP and SOIC Packages
Conforms to ANSI/TIA/EIA-644-1995 LVDS Standard
Operating Temperature: −40°C to +85°C

All trademarks are the property of their respective owners.

DS90CP22 is a 2x2 crosspoint switch utilizing LVDS (Low Voltage Differential Signaling) technology for low power, high speed operation. Data paths are fully differential from input to output for low noise generation and low pulse width distortion. The non-blocking design allows connection of any input to any output or outputs. LVDS I/O enable high speed data transmission for point-to-point interconnects. This device can be used as a high speed differential crosspoint, 2:1 mux, 1:2 demux, repeater or 1:2 signal splitter. The mux and demux functions are useful for switching between primary and backup circuits in fault tolerant systems. The 1:2 signal splitter and 2:1 mux functions are useful for distribution of serial bus across several rack-mounted backplanes.

The DS90CP22 accepts LVDS signal levels, LVPECL levels directly or PECL with attenuation networks.

The individual LVDS outputs can be put into TRI-STATE by use of the enable pins.

For more details, please refer to the section of this datasheet.

DS90CP22 is a 2x2 crosspoint switch utilizing LVDS (Low Voltage Differential Signaling) technology for low power, high speed operation. Data paths are fully differential from input to output for low noise generation and low pulse width distortion. The non-blocking design allows connection of any input to any output or outputs. LVDS I/O enable high speed data transmission for point-to-point interconnects. This device can be used as a high speed differential crosspoint, 2:1 mux, 1:2 demux, repeater or 1:2 signal splitter. The mux and demux functions are useful for switching between primary and backup circuits in fault tolerant systems. The 1:2 signal splitter and 2:1 mux functions are useful for distribution of serial bus across several rack-mounted backplanes.

The DS90CP22 accepts LVDS signal levels, LVPECL levels directly or PECL with attenuation networks.

The individual LVDS outputs can be put into TRI-STATE by use of the enable pins.

For more details, please refer to the section of this datasheet.

filter

Andere LVDS-, M-LVDS- und PECL-ICs suchen

Herunterladen Video mit Transkript ansehen Video

Top-Dokumentation	Typ	Titel	Datum
*	Datenblatt	DS90CP22 800 Mbps 2x2 LVDS Crosspoint Switch datasheet (Rev. E)	22.04.2013
	Whitepaper	LVDS, CML, ECL-differential interfaces with odd voltages	01.05.2003
	Whitepaper	Digital Microphones - Applications and System Partitioning	01.04.2003
	Whitepaper	Making the Most of Your LVDS - 5 Tips for Buffering Signal Integrity Headaches	01.08.2001

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Simulationsmodell

DS90CP22 IBIS Model

SNLM054.ZIP (29 KB) - IBIS-Modell

Unterstützte Produkte und Hardware

Herunterladen

Gehäuse	Pins	CAD-Symbole, Footprints und 3D-Modelle
SOIC (D)	16	Ultra Librarian
TSSOP (PW)	16	Ultra Librarian

Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

DS90CP22

800-Mbps-2x2-LVDS-Koppelpunktschalter

DS90CP22

Produktdetails

Ähnliche Produkte, die für Sie interessant sein könnten

Ähnliche Funktionalität wie der verglichene Baustein.

Technische Dokumentation

Design und Entwicklung

DS90CP22 IBIS Model

Bestellen & Qualität

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Videoreihe

Videos