Home Schnittstelle Highspeed-SerDes Serializer/Deserializer für FPD-Link
Home
Schnittstelle
Highspeed-SerDes
Serializer/Deserializer für FPD-Link

DS90UH981-Q1

AKTIV

4K DSI-zu-FPD-Link-IV-Bridge-Serializer mit HDCP

Jetzt bestellen
Datenblatt

DS90UH981-Q1

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Applications In-vehicle Infotainment (IVI) Input compatibility DSI Function Serializer Output compatibility FPD-Link IV LVDS Color depth (bpp) 30 Parallel video bandwidth (per port) (max) (Gbps) 10 Serial video bandwidth (per port) (max) (Gbps) 10.4 Features CRC, Coax or STP, Flexible GPIOs, HDCP, I2C Config, Line Fault Detection, Pattern Generation, Ultra-Low Data and Control Path Latency Signal conditioning Adaptive Equalizer EMI reduction LVDS Diagnostics BIST Rating Automotive Operating temperature range (°C) -40 to 105
Applications In-vehicle Infotainment (IVI) Input compatibility DSI Function Serializer Output compatibility FPD-Link IV LVDS Color depth (bpp) 30 Parallel video bandwidth (per port) (max) (Gbps) 10 Serial video bandwidth (per port) (max) (Gbps) 10.4 Features CRC, Coax or STP, Flexible GPIOs, HDCP, I2C Config, Line Fault Detection, Pattern Generation, Ultra-Low Data and Control Path Latency Signal conditioning Adaptive Equalizer EMI reduction LVDS Diagnostics BIST Rating Automotive Operating temperature range (°C) -40 to 105
VQFNP (RTD) 64 81 mm² (9 mm × 9 mm)
  • Single or dual port MIPI DSI receiver
    • Compliant to D-PHY v1.2 and DSI v1.3.1
    • Packed 16/18/24/30-bit RGB and 16-bit YCbCr
    • Loosely packed 18-bit RGB and 20-bit 4:2:2
    • 1 clock lane and 1-4 configurable data lanes per D-PHY Port
    • Up to 2.5 Gbps/lane with skew calibration
    • Supports data lane swap and polarity inversion
    • Supports both burst and non-burst mode
    • SuperFrame Unpacking Capability
    • Suitable for 4K at 60Hz video resolution
  • FPD-Link IV interface
    • Supports 10.8/6.75/3.375Gbps per channel; Up to 21.6Gbps over dual channels
    • Coax/STP interconnect support
    • Port Splitting to enable Y-cable interfaces
  • Ultra-low latency control channel
    • Two I2C up to 1MHz (up to 3.4MHz for local bus access)
    • High speed GPIOs
  • Backwards compatible
    • Integrated HDCP v1.4 with on-chip keys
    • 720P 92x and 1080P/2K 94x product families
    • ADAS 936, 954, 960, 962, 9702, 9722 deserializers
  • Security and diagnostics
    • Voltage and temperature monitoring
    • Line Fault Detection
    • BIST and pattern generation
    • CRC and error diagnostics
    • Unique ID for counterfeit protection
    • ECC on control bits
  • Advanced link robustness and EMC control
    • Data scrambling
    • Spread spectrum clocking generation (SSCG)
  • Low power operation
    • 1.8V and 1.1V dual power supply
  • AEC-Q100 qualified for automotive applications
    • AEC-Q100 grade-level 2: −40℃ to +105℃
    • 64 pin QFN Wettable flanks 9mm x 9mm
    • ISO 10605 and IEC 61000-4-2 ESD compliant
  • Single or dual port MIPI DSI receiver
    • Compliant to D-PHY v1.2 and DSI v1.3.1
    • Packed 16/18/24/30-bit RGB and 16-bit YCbCr
    • Loosely packed 18-bit RGB and 20-bit 4:2:2
    • 1 clock lane and 1-4 configurable data lanes per D-PHY Port
    • Up to 2.5 Gbps/lane with skew calibration
    • Supports data lane swap and polarity inversion
    • Supports both burst and non-burst mode
    • SuperFrame Unpacking Capability
    • Suitable for 4K at 60Hz video resolution
  • FPD-Link IV interface
    • Supports 10.8/6.75/3.375Gbps per channel; Up to 21.6Gbps over dual channels
    • Coax/STP interconnect support
    • Port Splitting to enable Y-cable interfaces
  • Ultra-low latency control channel
    • Two I2C up to 1MHz (up to 3.4MHz for local bus access)
    • High speed GPIOs
  • Backwards compatible
    • Integrated HDCP v1.4 with on-chip keys
    • 720P 92x and 1080P/2K 94x product families
    • ADAS 936, 954, 960, 962, 9702, 9722 deserializers
  • Security and diagnostics
    • Voltage and temperature monitoring
    • Line Fault Detection
    • BIST and pattern generation
    • CRC and error diagnostics
    • Unique ID for counterfeit protection
    • ECC on control bits
  • Advanced link robustness and EMC control
    • Data scrambling
    • Spread spectrum clocking generation (SSCG)
  • Low power operation
    • 1.8V and 1.1V dual power supply
  • AEC-Q100 qualified for automotive applications
    • AEC-Q100 grade-level 2: −40℃ to +105℃
    • 64 pin QFN Wettable flanks 9mm x 9mm
    • ISO 10605 and IEC 61000-4-2 ESD compliant

DS90UH981-Q1 is a MIPI DSI to FPD-Link III/IV bridge device. In conjunction with an FPD-Link IV deserializer, the chipset provides a high-speed serialized interface over low-cost 50Ω coax or STP cables. The DS90UH981-Q1 is a D-PHY v1.2 compliant device that serializes a MIPI DSI input supporting video resolutions including 4K with 30-bit color depth. The FPD-Link IV interface supports video and audio data transmission and full duplex control, including I2C and GPIO data over a single channel or dual channels. Consolidation of video data and control over two FPD-Link IV lanes reduces the interconnect size and weight and simplifies system design. EMI is minimized by the use of low voltage differential signaling, data scrambling, SSCG, and randomization. In backward compatible mode, the devices supports up to 720p and 1080p resolutions with 24-bit color depth over a single/dual link as well as HDCP v1.4 support when paired with an HDCP-capable deserializer. In ADAS compatible mode, the device is interoperable with 936, 95x, 96x & 97x deserializers supporting resolutions up to 8MP+/40fps.

DS90UH981-Q1 is a MIPI DSI to FPD-Link III/IV bridge device. In conjunction with an FPD-Link IV deserializer, the chipset provides a high-speed serialized interface over low-cost 50Ω coax or STP cables. The DS90UH981-Q1 is a D-PHY v1.2 compliant device that serializes a MIPI DSI input supporting video resolutions including 4K with 30-bit color depth. The FPD-Link IV interface supports video and audio data transmission and full duplex control, including I2C and GPIO data over a single channel or dual channels. Consolidation of video data and control over two FPD-Link IV lanes reduces the interconnect size and weight and simplifies system design. EMI is minimized by the use of low voltage differential signaling, data scrambling, SSCG, and randomization. In backward compatible mode, the devices supports up to 720p and 1080p resolutions with 24-bit color depth over a single/dual link as well as HDCP v1.4 support when paired with an HDCP-capable deserializer. In ADAS compatible mode, the device is interoperable with 936, 95x, 96x & 97x deserializers supporting resolutions up to 8MP+/40fps.

filter Andere Serializer/Deserializer für FPD-Link suchen
Herunterladen Video mit Transkript ansehen Video
Weitere Informationen anfordern

Das vollständige Datenblatt und weitere Designressourcen sind verfügbar. Jetzt anfordern

Technische Dokumentation

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 1
Top-Dokumentation Typ Titel Format-Optionen Neueste englische Version herunterladen Datum
* Datenblatt DS90UH981-Q1 4K DSI to FPD-Link IV Bridge Serializer With HDCP datasheet PDF | HTML 22.02.2024

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

DS90UH981-Q1EVM — DS90UH981-Q1 – Bridge-Serializer von DSI zu FPD-Link IV – Evaluierungsmodul

Das DS90Ux981-Q1EVM ist ein Evaluierungsmodul zur Evaluierung des DS90Ux981-Q1 MIPI-DSI-zu-FPD-Link IV-Serialisieres.  Der DS90Ux981-Q1 unterstützt Auflösungen mit extrem hoher Definition, wie zum Beispiel 4K mit 30 Bit pro Pixel bei 60 Hz. Der 2-MIPI-DSI-Port-Eingang ist kompatibel mit MIPI-DSI (...)
Unterstützte Produkte und Hardware
Evaluierungsplatine

DS90UH981-Q1MEVM — DS90UH981-Q1 – Bridge-Serializer von DSI zu FPD-Link IV – Evaluierungsmodul

Das DS90Ux981-Q1MEVM ist ein Evaluierungsmodul zur Evaluierung des DS90Ux981-Q1 MIPI-DSI-zu-FPD-Link IV-Serialisieres.  Der DS90Ux981-Q1 unterstützt Auflösungen mit extrem hoher Definition, wie zum Beispiel 4K mit 30 Bit pro Pixel bei 60 Hz. Der 2-MIPI-DSI-Port-Eingang ist kompatibel mit MIPI-DSI (...)
Unterstützte Produkte und Hardware
Support-Software

ALP-PROFILE-UPDATE — Analog LaunchPad Profile Update Software

ALP Profile Update contains latest fixes and updates to ALP profiles. If you are installing for the first time please install ALP Profile Update after installing ALP Framework.
Unterstützte Produkte und Hardware
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
VQFNP (RTD) 64 Ultra Librarian
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos