Produktdetails

Number of channels 1 Vs (min) (V) 10 Vs (max) (V) 36 CMRR (min) (dB) 86 Common-mode input low (min) (V) -20 Common-mode input high (max) (V) 20 Input offset (±) (max) (V) 0.00025 Iq (typ) (mA) 1.5 Slew rate (typ) (V/µs) 3 Voltage gain (min) (V/V) 1 Voltage gain (max) (V/V) 1 Small-signal bandwidth (typ) (Hz) 1000000 Rating Catalog Operating temperature range (°C) -40 to 85 Gain drift (max) (ppm/°C) 1 Gain error (±) (max) (%) 0.01
Number of channels 1 Vs (min) (V) 10 Vs (max) (V) 36 CMRR (min) (dB) 86 Common-mode input low (min) (V) -20 Common-mode input high (max) (V) 20 Input offset (±) (max) (V) 0.00025 Iq (typ) (mA) 1.5 Slew rate (typ) (V/µs) 3 Voltage gain (min) (V/V) 1 Voltage gain (max) (V/V) 1 Small-signal bandwidth (typ) (Hz) 1000000 Rating Catalog Operating temperature range (°C) -40 to 85 Gain drift (max) (ppm/°C) 1 Gain error (±) (max) (%) 0.01
PDIP (P) 8 92.5083 mm² 9.81 x 9.43 SOIC (D) 8 29.4 mm² 4.9 x 6 TO-CAN (LMC) 8 80.2816 mm² 8.96 x 8.96
  • Unity-gain difference amplifier configuration
  • High common-mode rejection (CMRR): 72dB (minimum)
  • Low gain error: 0.025% (maximum)
  • Low gain drift: 5ppm/°C (maximum)
  • Low nonlinearity: 0.001% (maximum)
  • Bandwidth: 1MHz (typical)
  • Low offset voltage: 500µV (maximum)
  • Low offset voltage drift: 20µV/°C (maximum)
  • Unity-gain difference amplifier configuration
  • High common-mode rejection (CMRR): 72dB (minimum)
  • Low gain error: 0.025% (maximum)
  • Low gain drift: 5ppm/°C (maximum)
  • Low nonlinearity: 0.001% (maximum)
  • Bandwidth: 1MHz (typical)
  • Low offset voltage: 500µV (maximum)
  • Low offset voltage drift: 20µV/°C (maximum)

The INA105 is a monolithic Gain = 1 differential amplifier consisting of a precision operational amplifier (op amp) and on-chip metal film resistor network. The resistors are laser trimmed for accurate gain and high common-mode rejection. Excellent tracking of resistors (TCR) maintains gain accuracy and common-mode rejection over temperature. The input common-mode range extends beyond the positive and negative supply rails.

The differential amplifier is the foundation of many commonly used circuits. The INA105 provides precision circuit function without using an expensive precision resistor network. The INA105 is available in 8-pin plastic DIP, SOIC surface-mount and TO-99 metal packages.

The INA105 is a monolithic Gain = 1 differential amplifier consisting of a precision operational amplifier (op amp) and on-chip metal film resistor network. The resistors are laser trimmed for accurate gain and high common-mode rejection. Excellent tracking of resistors (TCR) maintains gain accuracy and common-mode rejection over temperature. The input common-mode range extends beyond the positive and negative supply rails.

The differential amplifier is the foundation of many commonly used circuits. The INA105 provides precision circuit function without using an expensive precision resistor network. The INA105 is available in 8-pin plastic DIP, SOIC surface-mount and TO-99 metal packages.

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 10
Top-Dokumentation Typ Titel Format-Optionen Datum
* Data sheet INA105 Precision Unity Gain Differential Amplifier datasheet (Rev. B) PDF | HTML 12 Dez 2025
Application brief Level Shifting Signals With Differential Amplifiers (Rev. A) 02 Apr 2018
E-book The Signal e-book: A compendium of blog posts on op amp design topics 28 Mär 2017
Application note Make a -10V to +10V Adjustable Precision Voltage Source (Rev. A) 18 Mai 2015
Application note AC Coupling Instrumentation and Difference Amplifiers 27 Sep 2000
Application note Boost Amplifier Output Swing With Simple Modification 27 Sep 2000
Application note Extending the Common-Mode Range of Difference Amplifiers 27 Sep 2000
Application note Implementation and Applications of Current Sources and Current Receivers 27 Sep 2000
Application note Simple Circuit Delivers 38Vp-p at 5A from 28V Unipolar Supply 27 Sep 2000
Application note Single-Supply Operation of Isolation Amplifiers 27 Sep 2000

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

DIFFAMP-EVM — Evaluierungsmodul für universelle Differenz-Verstärker

Mit dem DIFFAMP-EVM können Sie sicher sein, eine gute Wahl gemacht zu haben, und Bausteine mühelos evaluieren und vergleichen. Dieses Modul unterstützt eine Vielzahl von Konfigurationen und kann für zuverlässige Evaluierung auf Ihre gewünschte Anwendung zugeschnitten werden. Ein (...)
Benutzerhandbuch: PDF | HTML
Evaluierungsplatine

DIP-ADAPTER-EVM — Evaluierungsmodul für DIP-Adapter

Schnelleres Entwickeln von Operationsverstärker-Prototypen und Testen derselben mit dem DIP-Adapter-EVM, welches eine schnelle, einfache und preiswerte Möglichkeit zum Verbinden mit kleinen, oberflächenmontierbaren ICs über eine Schnittstelle bietet. Sie können jeden unterstützten (...)

Benutzerhandbuch: PDF
Simulationsmodell

INA105 PSpice Model (Rev. B)

SBOM009B.ZIP (25 KB) - PSpice Model
Simulationsmodell

INA105 PSpice Model (VCM, VDM)

SBOMCS4.ZIP (19 KB) - PSpice Model
Simulationsmodell

INA105 TINA-TI Reference Design (Rev. B)

SBOC233B.TSC (96 KB) - TINA-TI Reference Design
Simulationsmodell

INA105 TINA-TI Spice Model (Rev. A)

SBOM296A.ZIP (2 KB) - TINA-TI Spice Model
Berechnungstool

ANALOG-ENGINEER-CALC PC software analog engineer's calculator

The analog engineer’s calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting operational-amplifier (...)

Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Simulationstool

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

PSpice® für TI ist eine Design- und Simulationsumgebung, welche Sie dabei unterstützt, die Funktionalität analoger Schaltungen zu evaluieren. Diese Design- und Simulationssuite mit vollem Funktionsumfang verwendet eine analoge Analyse-Engine von Cadence®. PSpice für TI ist kostenlos erhältlich und (...)
Simulationstool

TINA-TI — SPICE-basiertes analoges Simulationsprogramm

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
Benutzerhandbuch: PDF
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
PDIP (P) 8 Ultra Librarian
SOIC (D) 8 Ultra Librarian
TO-CAN (LMC) 8 Ultra Librarian

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos