INA168-Q1

AKTIV

Strommessverstärker mit variabler Verstärkung, AEC-Q100, 2,7 bis 60 V, 800 KHz

Jetzt bestellen

Datenblatt

document-pdfAcrobat INA1x8-Q1 Automotive-Grade, High-Side, Current-Output, Current-Shunt Monitor datasheet (Rev. J) (Englisch) PDF | HTML

INA168-Q1

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Product type

Analog output

Common-mode voltage (max) (V)

60

Common-mode voltage (min) (V)

2.7

Input offset (±) (max) (µV)

1000

Input offset drift (±) (typ) (µV/°C)

1

Features

Current Output

Rating

Automotive

Voltage gain (V/V)

adjustable

CMRR (min) (dB)

100

Bandwidth (kHz)

32

Iq (max) (mA)

0.06

Number of channels

1

Comparators (#)

0

Gain error (%)

2

Gain error drift (±) (max) (ppm/°C)

150

Operating temperature range (°C)

-40 to 125

Product type

Analog output

Common-mode voltage (max) (V)

60

Common-mode voltage (min) (V)

2.7

Input offset (±) (max) (µV)

1000

Input offset drift (±) (typ) (µV/°C)

1

Features

Current Output

Rating

Automotive

Voltage gain (V/V)

adjustable

CMRR (min) (dB)

100

Bandwidth (kHz)

32

Iq (max) (mA)

0.06

Number of channels

1

Comparators (#)

0

Gain error (%)

2

Gain error drift (±) (max) (ppm/°C)

150

Operating temperature range (°C)

-40 to 125

TSSOP (PW)

8

19.2 mm² (3 mm × 6.4 mm)

SOT-23 (DBV)

5

8.12 mm² (2.9 mm × 2.8 mm)

Qualified for Automotive Applications
AEC-Q100 Qualified With the Following Results:
- Device Temperature Grade 1: –40°C to 125°C Ambient Operating Temperature Range
- Device HBM ESD Classification Level 2
- Device CDM ESD Classification Level C6
Complete Unipolar High-Side Current-Measurement Circuit
Wide Supply and Common-Mode Ranges:
- INA138-Q1: 2.7 V to 36 V
- INA168-Q1: 2.7 V to 60 V
Independent Supply and Input Common-Mode Voltages
Single Resistor Gain Set
Low Quiescent Current (25 µA Typical)
Wide Temperature Range: –40°C to +125°C
Packages: TSSOP-8, SOT-23-5 (INA168-Q1)

Qualified for Automotive Applications
AEC-Q100 Qualified With the Following Results:
- Device Temperature Grade 1: –40°C to 125°C Ambient Operating Temperature Range
- Device HBM ESD Classification Level 2
- Device CDM ESD Classification Level C6
Complete Unipolar High-Side Current-Measurement Circuit
Wide Supply and Common-Mode Ranges:
- INA138-Q1: 2.7 V to 36 V
- INA168-Q1: 2.7 V to 60 V
Independent Supply and Input Common-Mode Voltages
Single Resistor Gain Set
Low Quiescent Current (25 µA Typical)
Wide Temperature Range: –40°C to +125°C
Packages: TSSOP-8, SOT-23-5 (INA168-Q1)

The INA138-Q1 and INA168-Q1 (INA1x8-Q1) devices are high-side, unidirectional, current sense amplifiers. Wide input common-mode voltage range, low quiescent current, and TSSOP and SOT-23 packaging enable use in a variety of applications.

Input common-mode and power-supply voltages are independent, and range from 2.7 V to 36 V for the INA138-Q1, and 2.7 V to 60 V for the INA168-Q1. Quiescent current is only 25 µA, which permits connecting the power supply to either side of the current-measurement shunt with minimal error.

The device converts a differential input voltage to a current output. This current is converted back to a voltage with an external load resistor that sets any gain from 1 to over 100. Although designed for current shunt measurement, the circuit invites creative applications in measurement and level shifting.

Both devices are available in a TSSOP-8 package. The INA168-Q1 is also available in a SOT-23-5 package. Both devices are specified for the –40°C to +125°C temperature range.

The INA138-Q1 and INA168-Q1 (INA1x8-Q1) devices are high-side, unidirectional, current sense amplifiers. Wide input common-mode voltage range, low quiescent current, and TSSOP and SOT-23 packaging enable use in a variety of applications.

Input common-mode and power-supply voltages are independent, and range from 2.7 V to 36 V for the INA138-Q1, and 2.7 V to 60 V for the INA168-Q1. Quiescent current is only 25 µA, which permits connecting the power supply to either side of the current-measurement shunt with minimal error.

The device converts a differential input voltage to a current output. This current is converted back to a voltage with an external load resistor that sets any gain from 1 to over 100. Although designed for current shunt measurement, the circuit invites creative applications in measurement and level shifting.

Both devices are available in a TSSOP-8 package. The INA168-Q1 is also available in a SOT-23-5 package. Both devices are specified for the –40°C to +125°C temperature range.

filter

Andere Analoge Strommessverstärker suchen

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.

Alle anzeigen 6

Top-Dokumentation	Typ	Titel	Format-Optionen	Datum
*	Datenblatt	INA1x8-Q1 Automotive-Grade, High-Side, Current-Output, Current-Shunt Monitor datasheet (Rev. J)	PDF \| HTML	03.08.2018
	Anwendungshinweis	Using a PCB Copper Trace as a Current Sense Shunt Resistor (Rev. A)	PDF \| HTML	27.04.2026
	Circuit design	High-voltage, high-side floating current sensing circuit using current output, c (Rev. A)	PDF \| HTML	26.09.2024
	Anwendungshinweis	Extending the Common-Mode Voltage Range of Current-Output Current Shunt Monitors (Rev. A)	PDF \| HTML	21.03.2022
	Application brief	Benefits of Intergated Low Inductive Shunt for PWM Applications		17.06.2017
	Application brief	Precision LED Brightness and Color Mixing With Discrete Current Sense Amplifiers		28.02.2017

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Simulationsmodell