Home Verstärker Strommessverstärker Digitale Leistungsmonitore mit integriertem Shunt-Widerstand
Home
Verstärker
Strommessverstärker
Digitale Leistungsmonitore mit integriertem Shunt-Widerstand
NEU

INA745A-Q1

AKTIV

Hochpräziser digitaler Leistungsmonitor, 40 V, 16 Bit, I²C-Ausgang, 800-μΩ-EZShunt™, AEC-Q100

Jetzt bestellen
Datenblatt

INA745A-Q1

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Common-mode voltage (max) (V) 40 Common-mode voltage (min) (V) -0.1 Continuous current (max) (A) 35 Input offset current (±) (max) (mA) 62.5 Input offset current drift (±) (typ) (µA/°C) 5 Gain error (%) 0.1 Iq (max) (mA) 1 Digital interface I2C Resolution (Bits) 16 Features Alert Function, Bidirectional, Digital Temp Monitor, Integrated Power Monitor, Integrated Shunt, Low-side Capable, Ultra precise Rating Automotive Operating temperature range (°C) -40 to 125
Common-mode voltage (max) (V) 40 Common-mode voltage (min) (V) -0.1 Continuous current (max) (A) 35 Input offset current (±) (max) (mA) 62.5 Input offset current drift (±) (typ) (µA/°C) 5 Gain error (%) 0.1 Iq (max) (mA) 1 Digital interface I2C Resolution (Bits) 16 Features Alert Function, Bidirectional, Digital Temp Monitor, Integrated Power Monitor, Integrated Shunt, Low-side Capable, Ultra precise Rating Automotive Operating temperature range (°C) -40 to 125
VQFN (REL) 14 15 mm² (5 mm × 3 mm)
  • AEC-Q100 qualified for automotive applications:
    • Temperature grade 1: –40°C to +125°C, TA
  • Functional Safety-Capable
  • Low loss integrated shunt resistor
    • Internal resistance: 800µΩ, TA = 25°C
    • Continuous current: ±35A, TA = 25°C
    • Peak measurement capability: ±39.32A
  • Current monitoring accuracy: A/B Grade (maximum)
    • Offset current: ±6.25mA / ±62.5mA
    • Offset drift: ±30µA/°C (A and B Grades)
    • System gain error: ±0.75% / ±1.25%
    • Common-mode rejection: ±0.125 / ±1.25mA/V
  • Power monitoring accuracy: A/B Grade, (maximum)
    • ±0.9% / ±1.6% at 25°C, full scale
  • Energy and charge accuracy: A/B Grade, (maximum)
    • ±1.4% / ±2.1% at 25°C, full scale
  • Temperature sensor: ±1.5°C (maximum at 25°C)
  • Precision oscillator: ±0.5% (maximum at 25°C)
  • Programmable conversion time and averaging
  • 2.94MHz high-speed I2C interface with 16 pin-selectable addresses
  • Operates from a 2.7V to 5.5V supply:
    • Operational current: 640µA (typical)
    • Shutdown current: 5µA (maximum)
  • AEC-Q100 qualified for automotive applications:
    • Temperature grade 1: –40°C to +125°C, TA
  • Functional Safety-Capable
  • Low loss integrated shunt resistor
    • Internal resistance: 800µΩ, TA = 25°C
    • Continuous current: ±35A, TA = 25°C
    • Peak measurement capability: ±39.32A
  • Current monitoring accuracy: A/B Grade (maximum)
    • Offset current: ±6.25mA / ±62.5mA
    • Offset drift: ±30µA/°C (A and B Grades)
    • System gain error: ±0.75% / ±1.25%
    • Common-mode rejection: ±0.125 / ±1.25mA/V
  • Power monitoring accuracy: A/B Grade, (maximum)
    • ±0.9% / ±1.6% at 25°C, full scale
  • Energy and charge accuracy: A/B Grade, (maximum)
    • ±1.4% / ±2.1% at 25°C, full scale
  • Temperature sensor: ±1.5°C (maximum at 25°C)
  • Precision oscillator: ±0.5% (maximum at 25°C)
  • Programmable conversion time and averaging
  • 2.94MHz high-speed I2C interface with 16 pin-selectable addresses
  • Operates from a 2.7V to 5.5V supply:
    • Operational current: 640µA (typical)
    • Shutdown current: 5µA (maximum)

The INA745x-Q1 is a digital power monitor with an integrated current sensing element along with a 16-bit delta-sigma ADC specifically designed for current-sensing applications. The device can measure full-scale currents up to ±39.32A with common-mode voltage support from –0.1V to +40V.

The INA745x-Q1 reports current, bus voltage, die temperature, power, energy and charge accumulation while employing a precision ±0.5% integrated oscillator, all while performing the needed calculations in the background. The integrated temperature sensor is ±2.5°C accurate over the junction temperature range.

The low offset and gain drift design of the INA745x-Q1 allows the device to be used in precise systems that do not undergo multi-temperature calibration during manufacturing.

The device allows for selectable ADC conversion times from 50µs to 4.12ms as well as sample averaging from 1x to 1024x, which further helps reduce the noise of the measured data.

The INA745x-Q1 is a digital power monitor with an integrated current sensing element along with a 16-bit delta-sigma ADC specifically designed for current-sensing applications. The device can measure full-scale currents up to ±39.32A with common-mode voltage support from –0.1V to +40V.

The INA745x-Q1 reports current, bus voltage, die temperature, power, energy and charge accumulation while employing a precision ±0.5% integrated oscillator, all while performing the needed calculations in the background. The integrated temperature sensor is ±2.5°C accurate over the junction temperature range.

The low offset and gain drift design of the INA745x-Q1 allows the device to be used in precise systems that do not undergo multi-temperature calibration during manufacturing.

The device allows for selectable ADC conversion times from 50µs to 4.12ms as well as sample averaging from 1x to 1024x, which further helps reduce the noise of the measured data.
filter Andere Digitale Leistungsmonitore mit integriertem Shunt-Widerstand suchen
Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 2
Top-Dokumentation Typ Titel Format-Optionen Neueste englische Version herunterladen Datum
* Datenblatt INA745x-Q1 AEC-Q100, 40V , 16 -Bit, Precision I2C Output Digital Power Monitor With EZShunt Technology datasheet (Rev. A) PDF | HTML 03.10.2025
Informationen zur funktionalen Sicherheit INA74X-Q1 Functional Safety FIT Rate, FMD and Pin FMA (Rev. A) PDF | HTML 08.05.2025

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

INA745-INA746EVM — Evaluierungsmodul INA745 und INA746 für EZShunt™ Digital Power Monitor mit integriertem Shunt-Widers

Das Evaluierungsmodul INA745 und IN746 (EVM) ist eine kompakte Plattform zur Evaluierung der Hauptmerkmale und Leistung der hochpräzisen digitalen Leistungsmonitore INA745A, INA745B und INA746 mit EZShunt™-Technologie in spezifizierten Eingangsstrom-, Gleichtaktspannungs- und (...)

Benutzerhandbuch: PDF | HTML
Unterstützte Produkte und Hardware
IDE, Konfiguration, Compiler oder Debugger

ASC-STUDIO-INA745 — ASC Studio (SysConfig) for configuring all aspects of the INA745 current sensor

SysConfig can be used to help simplify configuration challenges and accelerate software development with the INA745 current sensor.
Unterstützte Produkte und Hardware
Berechnungstool

ANALOG-ENGINEER-CALC — PC software analog engineer's calculator

Der Rechner für Analogtechniker beschleunigt viele der sich wiederholenden Berechnungen, die Entwickler von analogen Schaltungsdesigns regelmäßig durchführen müssen. Dieses PC-basierte Tool bietet eine grafische Schnittstelle mit einer Liste verschiedener gebräuchlicher Berechnungen. Das Spektrum (...)

Unterstützte Produkte und Hardware
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
VQFN (REL) 14 Ultra Librarian
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos