Home Schnittstelle ICs für serielle digitale Schnittstelle (SDI)
Home
Schnittstelle
ICs für serielle digitale Schnittstelle (SDI)

LMH0387

AKTIV

Konfigurierbarer E/A-adaptiver Kabelequalizer/Kabeltreiber für 3G HD/SD SDI

Jetzt bestellen
Datenblatt

LMH0387

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Function Config I/O Power consumption (mW) 235 Data rate (max) (Mbps) 2970 Control interface Pin, SPI Operating temperature range (°C) -40 to 85
Function Config I/O Power consumption (mW) 235 Data rate (max) (Mbps) 2970 Control interface Pin, SPI Operating temperature range (°C) -40 to 85
TLGA (NPD) 48 49 mm² (7 mm × 7 mm)
  • ST 424, ST 292, ST 344, and ST 259 compliant(1)
  • Supports DVB-ASI at 270Mbps
  • Data rates: 125Mbps to 2.97Gbps when receiving (DC to 2.97Gbps when driving cable)
  • Equalizes up to 120 meters of Belden 1694A at 2.97Gbps, up to 200 Meters of Belden 1694A at 1.485Gbps, or up to 400 meters of Belden 1694A at 270Mbps
  • Integrated return loss network (no external components required)
  • Power saving modes
  • Cable driver selectable slew rate
  • Internally terminated 100Ω LVDS receiver outputs with programmable common mode voltage and swing
  • Programmable launch amplitude optimization for receiver
  • Cable length indication
  • Single 3.3V supply operation
  • 48-pin laminate TLGA package
  • Industrial temperature range: −40°C to 85°C

(1)Due to SMPTE naming convention, all SMPTE Engineering Documents are numbered as a two-letter prefix and a number. Documents and references with the same root number and year are functionally identical; for example ST 424-2006 and SMPTE 424M-2006 see the same document.
  • ST 424, ST 292, ST 344, and ST 259 compliant(1)
  • Supports DVB-ASI at 270Mbps
  • Data rates: 125Mbps to 2.97Gbps when receiving (DC to 2.97Gbps when driving cable)
  • Equalizes up to 120 meters of Belden 1694A at 2.97Gbps, up to 200 Meters of Belden 1694A at 1.485Gbps, or up to 400 meters of Belden 1694A at 270Mbps
  • Integrated return loss network (no external components required)
  • Power saving modes
  • Cable driver selectable slew rate
  • Internally terminated 100Ω LVDS receiver outputs with programmable common mode voltage and swing
  • Programmable launch amplitude optimization for receiver
  • Cable length indication
  • Single 3.3V supply operation
  • 48-pin laminate TLGA package
  • Industrial temperature range: −40°C to 85°C

(1)Due to SMPTE naming convention, all SMPTE Engineering Documents are numbered as a two-letter prefix and a number. Documents and references with the same root number and year are functionally identical; for example ST 424-2006 and SMPTE 424M-2006 see the same document.

The LMH0387 3Gbps HD/SD SDI configurable I/O adaptive cable equalizer/cable driver provides a single chip interface to a BNC. The device can be configured either in the input mode as an equalizer to receive data over coaxial cable or in the output mode as a cable driver to transmit data over coaxial cable. The same I/O pin is used both for the input and the output functions of the device, allowing the use the flexibility to use a BNC attached to the device as either an input or an output.

The device operates over a wide range of data rates from 125Mbps to 2.97Gbps (DC to 2.97Gbps when driving cable) and supports ST 424, ST 292, ST 344, and ST 259. The return loss network is integrated within the device so no external components are required to meet the SMPTE return loss specification. The LMH0387 offers designers flexibility in system design and quicker time to market.

In the input mode, the LMH0387 features include a power-saving sleep mode, programmable output common mode voltage and swing, cable length indication, launch amplitude optimization, input signal detection, and an SPI. In the output mode, the LMH0387 features include two selectable slew rates for ST 424 / 292 and ST 259 compliance, and output driver power-down control.

The device is available in a 7mm × 7mm 48-pin laminate thin laminate grid array (TLGA) package.

The LMH0387 3Gbps HD/SD SDI configurable I/O adaptive cable equalizer/cable driver provides a single chip interface to a BNC. The device can be configured either in the input mode as an equalizer to receive data over coaxial cable or in the output mode as a cable driver to transmit data over coaxial cable. The same I/O pin is used both for the input and the output functions of the device, allowing the use the flexibility to use a BNC attached to the device as either an input or an output.

The device operates over a wide range of data rates from 125Mbps to 2.97Gbps (DC to 2.97Gbps when driving cable) and supports ST 424, ST 292, ST 344, and ST 259. The return loss network is integrated within the device so no external components are required to meet the SMPTE return loss specification. The LMH0387 offers designers flexibility in system design and quicker time to market.

In the input mode, the LMH0387 features include a power-saving sleep mode, programmable output common mode voltage and swing, cable length indication, launch amplitude optimization, input signal detection, and an SPI. In the output mode, the LMH0387 features include two selectable slew rates for ST 424 / 292 and ST 259 compliance, and output driver power-down control.

The device is available in a 7mm × 7mm 48-pin laminate thin laminate grid array (TLGA) package.
filter Andere ICs für serielle digitale Schnittstelle (SDI) suchen
Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 10
Top-Dokumentation Typ Titel Format-Optionen Neueste englische Version herunterladen Datum
* Datenblatt LMH0387 3Gbps HD/SD SDI Configurable I/O Adaptive Cable Equalizer/Cable Driver datasheet (Rev. I) PDF | HTML 01.06.2026
Anwendungshinweis Simplifying 4K SDI Video Design with a Bidrectional I/O 31.10.2017
Auswahlhilfe Broadcast and Professional Video Interface Solutions (Rev. E) PDF | HTML 05.04.2017
Anwendungshinweis AN-2156 Configuring the LMH0387 for an Equalizer-Only Application (Rev. A) 26.04.2013
Anwendungshinweis AN-2145 Power Considerations for SDI Products (Rev. B) 26.04.2013
Anwendungshinweis AN-2146 Power Design for SDI and Other Noise-Sensitive Devices (Rev. A) 26.04.2013
Anwendungshinweis AN-1943 Understanding Serial Digital Video Bit Rates (Rev. A) 26.04.2013
Benutzerhandbuch 3 Gbps HD SD SDI Configurable IO Adaptive Equalizer Driver Eval Bd User Guide 26.01.2012
Anwendungshinweis High-Speed Board Layout Challenges in FPGA/SDI Sub-Systems 12.11.2009
Designleitfaden Broadcast Video Owner's Manual 17.11.2006

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Anwendungssoftware und Frameworks

ALP — Analog LaunchPad Framework Utility

To get started with Analog LaunchPad (ALP) software: Download and install the ALP Framework Utility. Add new device profiles and example scripts with the ALP-PROFILE-UPDATE tool.
Unterstützte Produkte und Hardware
Simulationsmodell

LMH0387 IBIS Model

SNLM197.ZIP (1588 KB) - IBIS-Modell
Unterstützte Produkte und Hardware
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
TLGA (NPD) 48 Ultra Librarian
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos