All trademarks are the property of their respective owners.
The LMH6553 is a 900 MHz differential amplifier with an integrated adjustable output limiting clamp. The clamp increases system performance and provides transient over-voltage protection to following stages. The internal clamp feature of the LMH6553 reduces or eliminates the need for external discrete overload protection networks. When used to drive ADCs, the amplifier's output clamp allows low voltage ADC inputs to be protected from being overdriven and damaged by large input signals appearing at the system input. Fast overdrive recovery of 600 ps ensures the amplifier output rapidly recovers from a clamping event and quickly resumes to follow the input signal. The LMH6553 delivers exceptional bandwidth, distortion, and noise performance ideal for driving ADCs up to 14-bits. The LMH6553 could also be used for automotive, communication, medical, test and measurement, video, and LIDAR applications.
With external gain set resistors and integrated common mode feedback, the LMH6553 can be configured as either a differential input to differential output or single ended input to differential output gain block. The LMH6553 can be AC or DC coupled at the input which makes it suitable for a wide range of applications including communication systems and high speed oscilloscope front ends. The LMH6553 is available in 8-pin SO PowerPAD and 8-pin WSON packages, and is part of our LMH high speed amplifier family.
| Top-Dokumentation | Typ | Titel | Format-Optionen | Neueste englische Version herunterladen | Datum |
|---|---|---|---|---|---|
| * | Datenblatt | LMH6553 900 MHz Fully Differential Amplifier With Output Limiting Clamp datasheet (Rev. H) | 18.03.2013 | ||
| E-book | The Signal e-book: A compendium of blog posts on op amp design topics | PDF | HTML | 28.03.2017 | ||
| Anwendungshinweis | AN-1719 Noise Figure Analysis Fully Differential Amplifier (Rev. A) | 01.05.2013 | |||
| Benutzerhandbuch | LMH6553SDEVAL High Speed Differential Amplifier Evaluation Board (Rev. A) | 01.05.2013 | |||
| Anwendungshinweis | Using High Speed Diff Amp to Drive ADCs (Rev. A) | 26.04.2013 | |||
| Analog Design Journal | Converting single-ended video to differential video in single-supply systems | 16.09.2011 | |||
| Anwendungshinweis | Adaptive Speed Control for Automotive Systems | 20.11.2007 | |||
| Anwendungshinweis | Selecting Amplifiers, ADCs, and Clocks for High-Performance Signal Paths | 13.09.2007 | |||
| Anwendungshinweis | A Walk Along the Signal Path (High-Speed Signal Path) | 30.03.2005 |
Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.
The LMH6553SDEVAL evaluation board is designed to aid in the characterization of TI`s LMH6553 fully differential amplifier with output limiting clamp in an 8-pin LLP package. The LMH6553 is part of the LMH® high speed amplifier family. Use the evaluation board as a guide for high frequency (...)
| Gehäuse | Pins | CAD-Symbole, Footprints und 3D-Modelle |
|---|---|---|
| HSOIC (DDA) | 8 | Ultra Librarian |
| WSON (NGS) | 8 | Ultra Librarian |
Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.
Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support.