LPV811

AKTIV

Einkanaliger 450-nA-Präzisions-Nanopower-Operationsverstärker

Jetzt bestellen

Datenblatt

document-pdfAcrobat LPV811/LPV812 Precision 425 nA Nanopower Operational Amplifiers datasheet (Rev. B) (Englisch) PDF | HTML

LPV811

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Number of channels

1

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

5.5

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

1.6

Vos (offset voltage at 25°C) (max) (mV)

0.37

Offset drift (typ) (µV/°C)

1

GBW (typ) (MHz)

0.008

Features

EMI Hardened

Slew rate (typ) (V/µs)

0.002

Rail-to-rail

In to V-, Out

Iq per channel (typ) (mA)

0.00045

Vn at 1 kHz (typ) (nV√Hz)

420

CMRR (typ) (dB)

95

Rating

Catalog

Operating temperature range (°C)

-40 to 125

Iout (typ) (A)

0.0047

Architecture

CMOS

Input common mode headroom (to negative supply) (typ) (V)

0

Input common mode headroom (to positive supply) (typ) (V)

-0.9

Output swing headroom (to negative supply) (typ) (V)

0.0025

Output swing headroom (to positive supply) (typ) (V)

-0.0035

Number of channels

1

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

5.5

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

1.6

Vos (offset voltage at 25°C) (max) (mV)

0.37

Offset drift (typ) (µV/°C)

1

GBW (typ) (MHz)

0.008

Features

EMI Hardened

Slew rate (typ) (V/µs)

0.002

Rail-to-rail

In to V-, Out

Iq per channel (typ) (mA)

0.00045

Vn at 1 kHz (typ) (nV√Hz)

420

CMRR (typ) (dB)

95

Rating

Catalog

Operating temperature range (°C)

-40 to 125

Iout (typ) (A)

0.0047

Architecture

CMOS

Input common mode headroom (to negative supply) (typ) (V)

0

Input common mode headroom (to positive supply) (typ) (V)

-0.9

Output swing headroom (to negative supply) (typ) (V)

0.0025

Output swing headroom (to positive supply) (typ) (V)

-0.0035

SOT-23 (DBV)

5

8.12 mm² (2.9 mm × 2.8 mm)

Nanopower Supply Current: 425 nA/channel
Offset Voltage: 300 µV (max)
TcVos: 1 µV/°C
Gain-Bandwidth: 8 kHz
Unity-Gain Stable
Low Input Bias Current : 100 fA
Wide Supply Range: 1.6 V to 5.5 V
Rail-to-Rail Output
No Output Reversals
EMI Protection
Temperature Range: –40°C to 125°C
Industry Standard Packages:
- Single in 5-pin SOT-23
- Dual in 8-pin VSSOP

Nanopower Supply Current: 425 nA/channel
Offset Voltage: 300 µV (max)
TcVos: 1 µV/°C
Gain-Bandwidth: 8 kHz
Unity-Gain Stable
Low Input Bias Current : 100 fA
Wide Supply Range: 1.6 V to 5.5 V
Rail-to-Rail Output
No Output Reversals
EMI Protection
Temperature Range: –40°C to 125°C
Industry Standard Packages:
- Single in 5-pin SOT-23
- Dual in 8-pin VSSOP

The LPV811 (single) and LPV812 (dual) are a ultra-low-power precision operational amplifier family for “Always ON” sensing applications in battery powered wireless and low power wired equipment. With 8 kHz of bandwidth from 425 nA of quiescent current and a trimmed offset voltage to under 300µV, the LPV81x amplifiers provide the required precision while minimizing power consumption in equipment such as gas detectors and portable electronic devices where operational battery-life is critical.

In addition to being ultra-low-power, the LPV81x amplifiers have CMOS input stages with fempto-amp bias currents for impedance source applications. The LPV81x amplifiers also feature a negative-rail sensing input stage and a rail-to-rail output stage that swings within millivolts of the rails, maintaining the widest dynamic range possible. EMI protection is designed into the LPV81x in order to reduce system sensitivity to unwanted RF signals from mobile phones, WiFi, radio transmitters, and tag readers.

The LPV811 (single) and LPV812 (dual) are a ultra-low-power precision operational amplifier family for “Always ON” sensing applications in battery powered wireless and low power wired equipment. With 8 kHz of bandwidth from 425 nA of quiescent current and a trimmed offset voltage to under 300µV, the LPV81x amplifiers provide the required precision while minimizing power consumption in equipment such as gas detectors and portable electronic devices where operational battery-life is critical.

In addition to being ultra-low-power, the LPV81x amplifiers have CMOS input stages with fempto-amp bias currents for impedance source applications. The LPV81x amplifiers also feature a negative-rail sensing input stage and a rail-to-rail output stage that swings within millivolts of the rails, maintaining the widest dynamic range possible. EMI protection is designed into the LPV81x in order to reduce system sensitivity to unwanted RF signals from mobile phones, WiFi, radio transmitters, and tag readers.

filter

Andere Präzisionsoperationsverstärker (Vos < 1 mV) suchen

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.

Alle anzeigen 11

Top-Dokumentation	Typ	Titel	Format-Optionen	Datum
*	Datenblatt	LPV811/LPV812 Precision 425 nA Nanopower Operational Amplifiers datasheet (Rev. B)	PDF \| HTML	01.11.2016
	Application brief	Low-Power, Small-Size, High-Side Current Monitoring		03.06.2020
	Anwendungshinweis	Nano-Power Transimpedance Amplifier for Current Output Sensors		07.03.2018
	Application brief	Extend Battery Life and Simplify Calibration in Gas Sensing Applications (Rev. A)		06.02.2018
	Anwendungshinweis	Nano-Power Battery Monitoring in Personal Electronics		08.12.2017
	Technischer Artikel	How to make precision measurements on a nanopower budget, part 1: DC gain in nanop	PDF \| HTML	06.12.2017
	Whitepaper	Cities grow smarter through innovative semiconductor technologies		07.07.2017
	E-book	The Signal e-book: A compendium of blog posts on op amp design topics	PDF \| HTML	28.03.2017
	Technischer Artikel	How to improve IoT designs with a nanopower EMI-tolerant op amp	PDF \| HTML	09.11.2016
	Anwendungshinweis	Precision Voltage Offset: When Does it Matter? (Rev. A)		02.11.2016
	Anwendungshinweis	Comparing EMI Performance of LPV802 with Other Devices in a Gas Sensor App		18.10.2016

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

AMP-PDK-EVM — Evaluierungsmodul für das Verstärker-Leistungs-Entwicklungskit

Das Verstärker-Leistungs-Entwicklungskit (PDK) ist ein Evaluierungsmodul (EVM) zum Testen gängiger Operationsverstärker (OpAmp)-Parameter und ist mit den meisten Operationsverstärkern und Komparatoren kompatibel. Das EVM-Kit bietet eine Hauptplatine mit verschiedenen gesockelten (...)

Benutzerhandbuch: PDF | HTML