OPA454

AKTIV

Hochspannungs (100 V)-, Hochstrom (50 mA)-Operationsverstärker, g=1 stabil

Jetzt bestellen

Datenblatt

document-pdfAcrobat OPA454 High-Voltage (100-V), High-Current (50-mA) Operational Amplifiers, G = 1 Stable datasheet (Rev. B) (Englisch) PDF | HTML

OPA454

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Number of channels

1

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

10

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

100

Iout (typ) (A)

0.05

GBW (typ) (MHz)

2.5

Slew rate (typ) (V/µs)

13

Vos (offset voltage at 25°C) (max) (mV)

4

Offset drift (typ) (µV/°C)

1.6

Iq per channel (typ) (mA)

3.2

Features

Shutdown

Rating

Catalog

Operating temperature range (°C)

-55 to 125

Input bias current (max) (pA)

100

CMRR (typ) (dB)

146

Rail-to-rail

No

Architecture

FET

Number of channels

1

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

10

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

100

Iout (typ) (A)

0.05

GBW (typ) (MHz)

2.5

Slew rate (typ) (V/µs)

13

Vos (offset voltage at 25°C) (max) (mV)

4

Offset drift (typ) (µV/°C)

1.6

Iq per channel (typ) (mA)

3.2

Features

Shutdown

Rating

Catalog

Operating temperature range (°C)

-55 to 125

Input bias current (max) (pA)

100

CMRR (typ) (dB)

146

Rail-to-rail

No

Architecture

FET

HSOIC (DDA)

8

29.4 mm² (4.9 mm × 6 mm)

Wide Power-Supply Range:
±5 V (10 V) to ±50 V (100 V)
High-Output Load Drive: I_O > ±50 mA
Wide Output Voltage Swing: 1 V to Rails
Independent Output Disable or Shutdown
Wide Temperature Range: –40°C to +85°C
8-Pin SO Package

Wide Power-Supply Range:
±5 V (10 V) to ±50 V (100 V)
High-Output Load Drive: I_O > ±50 mA
Wide Output Voltage Swing: 1 V to Rails
Independent Output Disable or Shutdown
Wide Temperature Range: –40°C to +85°C
8-Pin SO Package

The OPA454 device is a low-cost operational amplifier with high voltage (100 V) and relatively high current drive (50 mA). It is unity-gain stable and has a gain-bandwidth product of 2.5 MHz.

The OPA454 is internally protected against overtemperature conditions and current overloads. It is fully specified to perform over a wide power-supply range of ±5 V to ±50 V or on a single supply of 10 V to 100 V. The status flag is an open-drain output that allows it to be easily referenced to standard low-voltage logic circuitry. This high-voltage operational amplifier provides excellent accuracy, wide output swing, and is free from phase inversion problems that are often found in similar amplifiers.

The output can be independently disabled using the Enable or Disable Pin that has its own common return pin to allow easy interface to low-voltage logic circuitry. This disable is accomplished without disturbing the input signal path, not only saving power but also protecting the load.

Featured in a small exposed metal pad package, the OPA454 is easy to heatsink over the extended industrial temperature range, –40°C to +85°C.

The OPA454 device is a low-cost operational amplifier with high voltage (100 V) and relatively high current drive (50 mA). It is unity-gain stable and has a gain-bandwidth product of 2.5 MHz.

The OPA454 is internally protected against overtemperature conditions and current overloads. It is fully specified to perform over a wide power-supply range of ±5 V to ±50 V or on a single supply of 10 V to 100 V. The status flag is an open-drain output that allows it to be easily referenced to standard low-voltage logic circuitry. This high-voltage operational amplifier provides excellent accuracy, wide output swing, and is free from phase inversion problems that are often found in similar amplifiers.

The output can be independently disabled using the Enable or Disable Pin that has its own common return pin to allow easy interface to low-voltage logic circuitry. This disable is accomplished without disturbing the input signal path, not only saving power but also protecting the load.

Featured in a small exposed metal pad package, the OPA454 is easy to heatsink over the extended industrial temperature range, –40°C to +85°C.

filter

Andere Leistungsoperationsverstärker suchen

Herunterladen Video mit Transkript ansehen Video

Top-Dokumentation	Typ	Titel	Format-Optionen	Datum
*	Datenblatt	OPA454 High-Voltage (100-V), High-Current (50-mA) Operational Amplifiers, G = 1 Stable datasheet (Rev. B)	PDF \| HTML	31.03.2016
	Application brief	How to Select Precision Amplifiers for Semiconductor Testers (Rev. A)	PDF \| HTML	03.12.2020
	E-book	The Signal e-book: A compendium of blog posts on op amp design topics	PDF \| HTML	28.03.2017
	Anwendungshinweis	Power Amplifier Stress and Power Handling Limitations		27.09.2000