SN65LVCP23

AKTIV

Crosspoint-Schalter 2 x 2: LVPECL-Ausgänge

Jetzt bestellen

Datenblatt

document-pdfAcrobat 2x2 LVPECL Crosspoint Switch datasheet (Rev. E) (Englisch)

SN65LVCP23

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Function

Crosspoint

Protocols

CML, LVDS, LVPECL

Number of transmitters

2

Number of receivers

2

Signaling rate (Mbps)

1300

Input signal

CML, LVDS, LVPECL

Output signal

LVPECL

Rating

Catalog

Operating temperature range (°C)

-40 to 85

Function

Crosspoint

Protocols

CML, LVDS, LVPECL

Number of transmitters

2

Number of receivers

2

Signaling rate (Mbps)

1300

Input signal

CML, LVDS, LVPECL

Output signal

LVPECL

Rating

Catalog

Operating temperature range (°C)

-40 to 85

SOIC (D)

16

59.4 mm² (9.9 mm × 6 mm)

TSSOP (PW)

16

32 mm² (5 mm × 6.4 mm)

High Speed 2x2 LVPECL Crosspoint Switch
LVDS Crosspoint Switch Available in SN65LVCP22
50 ps (Typ), of Peak-to-Peak Jitter With PRBS = 2²³- 1 Pattern
Output (Channel-to-Channel) Skew Is 10 ps (Typ), 50 ps (Max)
Configurable as 2:1 Mux, 1:2 Demux, Repeater or 1:2 Signal Splitter
Inputs Accept LVDS, LVPECL, and CML Signals
Fast Switch Time of 1.7 ns (Typ)
Fast Propagation Delay of 0.75 ns (Typ)
16 Lead SOIC and TSSOP Packages
Operating Temperature: -40°C to 85°C
APPLICATIONS
- Gigabit Ethernet Redundant Transmission Paths
- Gigabit Interface Converters (GBICs)
- Fibre Channel Redundant Transmission Paths
- HDTV Video Routing
- Base Stations
- Protection Switching for Serial Backplanes
- Network Switches/Routers
- Optical Networking Line Cards/Switches
- Clock Distribution

High Speed 2x2 LVPECL Crosspoint Switch
LVDS Crosspoint Switch Available in SN65LVCP22
50 ps (Typ), of Peak-to-Peak Jitter With PRBS = 2²³- 1 Pattern
Output (Channel-to-Channel) Skew Is 10 ps (Typ), 50 ps (Max)
Configurable as 2:1 Mux, 1:2 Demux, Repeater or 1:2 Signal Splitter
Inputs Accept LVDS, LVPECL, and CML Signals
Fast Switch Time of 1.7 ns (Typ)
Fast Propagation Delay of 0.75 ns (Typ)
16 Lead SOIC and TSSOP Packages
Operating Temperature: -40°C to 85°C
APPLICATIONS
- Gigabit Ethernet Redundant Transmission Paths
- Gigabit Interface Converters (GBICs)
- Fibre Channel Redundant Transmission Paths
- HDTV Video Routing
- Base Stations
- Protection Switching for Serial Backplanes
- Network Switches/Routers
- Optical Networking Line Cards/Switches
- Clock Distribution

The SN65LVCP23 is a 2x2 LVPECL crosspoint switch. The dual channels incorporate wide common-mode (0 V to 4 V) receivers, allowing for the receipt of LVDS, LVPECL, and CML signals. The dual outputs are LVPECL drivers to provide high-speed operation. The SN65LVCP23 provides a single device supporting 2:2 buffering (repeating), 1:2 splitting, 2:1 multiplexing, 2x2 switching, and LVDS/CML to LVPECL level translation on each channel. The flexible operation of the SN65LVCP23 provides a single device to support the redundant serial bus transmission needs (working and protection switching cards) of fault-tolerant switch systems found in optical networking, wireless infrastructure, and data communications systems. TI offers an additional gigabit repeater/translator in the SN65LVDS101.

The SN65LVCP23 uses a fully differential data path to ensure low-noise generation, fast switching times, low pulse width distortion, and low jitter. Output channel-to-channel skew is less than 10 ps (typ) and 50 ps (max) to ensure accurate alignment of outputs in all applications. Both SOIC and TSSOP package options are available.

The SN65LVCP23 is a 2x2 LVPECL crosspoint switch. The dual channels incorporate wide common-mode (0 V to 4 V) receivers, allowing for the receipt of LVDS, LVPECL, and CML signals. The dual outputs are LVPECL drivers to provide high-speed operation. The SN65LVCP23 provides a single device supporting 2:2 buffering (repeating), 1:2 splitting, 2:1 multiplexing, 2x2 switching, and LVDS/CML to LVPECL level translation on each channel. The flexible operation of the SN65LVCP23 provides a single device to support the redundant serial bus transmission needs (working and protection switching cards) of fault-tolerant switch systems found in optical networking, wireless infrastructure, and data communications systems. TI offers an additional gigabit repeater/translator in the SN65LVDS101.

The SN65LVCP23 uses a fully differential data path to ensure low-noise generation, fast switching times, low pulse width distortion, and low jitter. Output channel-to-channel skew is less than 10 ps (typ) and 50 ps (max) to ensure accurate alignment of outputs in all applications. Both SOIC and TSSOP package options are available.

filter

Andere LVDS-, M-LVDS- und PECL-ICs suchen

Herunterladen Video mit Transkript ansehen Video

Top-Dokumentation	Typ	Titel	Format-Optionen	Neueste englische Version herunterladen	Datum
*	Datenblatt	2x2 LVPECL Crosspoint Switch datasheet (Rev. E)			10.05.2006

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Simulationsmodell