TB5R2

AKTIV

Vierfach-PECL-Leitungsempfänger

Jetzt bestellen

Datenblatt

document-pdfAcrobat TB5R1,TB5R2, Quad Differential PECL Receivers datasheet (Rev. C) (Englisch)

TB5R2

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Function

Receiver

Protocols

PECL

Number of transmitters

0

Number of receivers

4

Signaling rate (Mbps)

100

Input signal

PECL

Output signal

TTL

Rating

Catalog

Operating temperature range (°C)

-40 to 85

Function

Receiver

Protocols

PECL

Number of transmitters

0

Number of receivers

4

Signaling rate (Mbps)

100

Input signal

PECL

Output signal

TTL

Rating

Catalog

Operating temperature range (°C)

-40 to 85

SOIC (DW)

16

106.09 mm² (10.3 mm × 10.3 mm)

SOIC (D)

16

59.4 mm² (9.9 mm × 6 mm)

Functional Replacements for the Agere BRF1A, BRF2A, BRS2A, and BRS2B
Pin Equivalent to General Trade 26LS32
High Input Impedance Approximately 8 k
4-ns Maximum Propagation Delay
TB5R1 Provides 50-mV Hysteresis
TB5R2 With -125-mV Threshold Offset for Preferred State Output
-1.1-V to 7.1-V Common Mode Range
Single 5-V ±10% Supply
Slew Rate Limited (1 ns min 80% to 20%)
TB5R2 Output Defaults to Logic 1 When Inputs Left Open or Shorted to V_CC or GND
ESD Protection HBM > 3 kV, CDM > 2 kV
Operating Temperature Range: -40°C to 85°C
Available in Gull-Wing SOIC (JEDEC MS-013, DW) and SOIC (D) Package
APPLICATIONS
- Digital Data or Clock Transmission Over Balanced Lines

Functional Replacements for the Agere BRF1A, BRF2A, BRS2A, and BRS2B
Pin Equivalent to General Trade 26LS32
High Input Impedance Approximately 8 k
4-ns Maximum Propagation Delay
TB5R1 Provides 50-mV Hysteresis
TB5R2 With -125-mV Threshold Offset for Preferred State Output
-1.1-V to 7.1-V Common Mode Range
Single 5-V ±10% Supply
Slew Rate Limited (1 ns min 80% to 20%)
TB5R2 Output Defaults to Logic 1 When Inputs Left Open or Shorted to V_CC or GND
ESD Protection HBM > 3 kV, CDM > 2 kV
Operating Temperature Range: -40°C to 85°C
Available in Gull-Wing SOIC (JEDEC MS-013, DW) and SOIC (D) Package
APPLICATIONS
- Digital Data or Clock Transmission Over Balanced Lines

These quad differential receivers accept digital data over balanced transmission lines. They translate differential input logic levels to TTL output logic levels.

The TB5R1 is a pin- and function-compatible replacement for the Agere systems BRF1A and BRF2A; it includes 3-kV HBM and 2-kV CDM ESD protection.

The TB5R2 is a pin- and function-compatible replacement for the Agere systems BRS2A and BRS2B and incorporates a 125-mV receiver input offset, preferred state output, 3-kV HBM and 2-kV CDM ESD protection. The TB5R2 preferred state feature places the high state when the inputs are open, shorted to ground, or shorted to the power supply.

The power-down loading characteristics of the receiver input circuit are approximately 8 k relative to the power supplies; hence they do not load the transmission line when the circuit is powered down.

The packaging for these differential line receivers include a 16-pin gull wing SOIC (DW) and SOIC (D).

The enable inputs of this device include internal pullup resistors of approximately 40 k that are connected to V_CC to ensure a logical high level input if the inputs are open circuited.

These quad differential receivers accept digital data over balanced transmission lines. They translate differential input logic levels to TTL output logic levels.

The TB5R1 is a pin- and function-compatible replacement for the Agere systems BRF1A and BRF2A; it includes 3-kV HBM and 2-kV CDM ESD protection.

The TB5R2 is a pin- and function-compatible replacement for the Agere systems BRS2A and BRS2B and incorporates a 125-mV receiver input offset, preferred state output, 3-kV HBM and 2-kV CDM ESD protection. The TB5R2 preferred state feature places the high state when the inputs are open, shorted to ground, or shorted to the power supply.

The power-down loading characteristics of the receiver input circuit are approximately 8 k relative to the power supplies; hence they do not load the transmission line when the circuit is powered down.

The packaging for these differential line receivers include a 16-pin gull wing SOIC (DW) and SOIC (D).

The enable inputs of this device include internal pullup resistors of approximately 40 k that are connected to V_CC to ensure a logical high level input if the inputs are open circuited.

filter

Andere LVDS-, M-LVDS- und PECL-ICs suchen

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.

Alle anzeigen 1

Top-Dokumentation	Typ	Titel	Format-Optionen	Neueste englische Version herunterladen	Datum
*	Datenblatt	TB5R1,TB5R2, Quad Differential PECL Receivers datasheet (Rev. C)			18.01.2008

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Simulationsmodell