Home Verstärker Verstärker mit programmierbarer Verstärkung (PGA) und mit variabler Verstärkung (VGA)
Home
Verstärker
Verstärker mit programmierbarer Verstärkung (PGA) und mit variabler Verstärkung (VGA)

THS7530-Q1

AKTIV

Volldifferenzieller Verstärker mit stufenlosem Verstärkungsfaktor für die Automobilindustrie, 300 MH

Jetzt bestellen
Datenblatt

THS7530-Q1

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

PGA/VGA VGA Number of channels 1 Vs (min) (V) 4.5 Vs (max) (V) 5.5 Input type Differential, Single-ended Output type Differential Interface type Digital Gain Set BW at Acl (MHz) 300 Acl, min spec gain (V/V) 3.8 Voltage gain (min) (V/V) 3.8 Voltage gain (max) (V/V) 211 Gain (max) (dB) 46.5 Architecture Fully Differential ADC Driver Features Integrated Clamps, Shutdown, Single-ended to Differential conversion Vos (offset voltage at 25°C) (typ) (mV) 100 Input voltage noise (typ) (µV√Hz) 0.0011 Slew rate (typ) (V/µs) 1250 Rating Automotive Operating temperature range (°C) -40 to 125
PGA/VGA VGA Number of channels 1 Vs (min) (V) 4.5 Vs (max) (V) 5.5 Input type Differential, Single-ended Output type Differential Interface type Digital Gain Set BW at Acl (MHz) 300 Acl, min spec gain (V/V) 3.8 Voltage gain (min) (V/V) 3.8 Voltage gain (max) (V/V) 211 Gain (max) (dB) 46.5 Architecture Fully Differential ADC Driver Features Integrated Clamps, Shutdown, Single-ended to Differential conversion Vos (offset voltage at 25°C) (typ) (mV) 100 Input voltage noise (typ) (µV√Hz) 0.0011 Slew rate (typ) (V/µs) 1250 Rating Automotive Operating temperature range (°C) -40 to 125
HTSSOP (PWP) 14 32 mm² (5 mm × 6.4 mm)
  • Qualified for Automotive Applications
  • AEC-Q100 Qualified With the Following Results:
    • Device Temperature Grade 1: –40°C to +125°C Ambient Operating Temperature Range
    • Device HBM Classification Level 2
    • Device CDM Classification Level C6
  • Low Noise: Vn = 1.1 nV/√Hz,
    Noise Figure = 9 dB
  • Low Distortion:
    • HD2 = –65 dBc, HD3 = –61 dBc at 32 MHz
    • IMD3 = –62 dBc, OIP3 = 21 dBm at 70 MHz
  • 300-MHz Bandwidth
  • Continuously Variable Gain Range: 11.6 dB
    to 46.5 dB
  • Gain Slope: 38.8 dB/V
  • Fully Differential Input and Output
  • Output Common-Mode Voltage Control
  • Output Voltage Limiting

All trademarks are the property of their respective owners.

  • Qualified for Automotive Applications
  • AEC-Q100 Qualified With the Following Results:
    • Device Temperature Grade 1: –40°C to +125°C Ambient Operating Temperature Range
    • Device HBM Classification Level 2
    • Device CDM Classification Level C6
  • Low Noise: Vn = 1.1 nV/√Hz,
    Noise Figure = 9 dB
  • Low Distortion:
    • HD2 = –65 dBc, HD3 = –61 dBc at 32 MHz
    • IMD3 = –62 dBc, OIP3 = 21 dBm at 70 MHz
  • 300-MHz Bandwidth
  • Continuously Variable Gain Range: 11.6 dB
    to 46.5 dB
  • Gain Slope: 38.8 dB/V
  • Fully Differential Input and Output
  • Output Common-Mode Voltage Control
  • Output Voltage Limiting

All trademarks are the property of their respective owners.

The THS7530-Q1 device is fabricated using Texas Instruments' state-of-the-art BiCom III SiGe complementary bipolar process. The THS7530-Q1 device is a DC-coupled, wide bandwidth amplifier with voltage-controlled gain. The amplifier has high-impedance differential inputs and low-impedance differential outputs with high-bandwidth gain control, output common-mode control, and output voltage clamping.

Signal-channel performance is exceptional with
300-MHz bandwidth, and third harmonic distortion of –61 dBc at 32 MHz with 1-VPP output into 400 Ω.

Gain control is linear in dB with 0 V to 0.9 V varying the gain from 11.6 dB to 46.5 dB with 38.8-dB/V gain slope.

Output voltage limiting is provided to limit the output voltage swing and to prevent saturating following stages.

The device is characterized for operation over the automotive temperature range, –40°C to +125°C.  

For all available packages, see the orderable addendum at the end of the data sheet.

The THS7530-Q1 device is fabricated using Texas Instruments' state-of-the-art BiCom III SiGe complementary bipolar process. The THS7530-Q1 device is a DC-coupled, wide bandwidth amplifier with voltage-controlled gain. The amplifier has high-impedance differential inputs and low-impedance differential outputs with high-bandwidth gain control, output common-mode control, and output voltage clamping.

Signal-channel performance is exceptional with
300-MHz bandwidth, and third harmonic distortion of –61 dBc at 32 MHz with 1-VPP output into 400 Ω.

Gain control is linear in dB with 0 V to 0.9 V varying the gain from 11.6 dB to 46.5 dB with 38.8-dB/V gain slope.

Output voltage limiting is provided to limit the output voltage swing and to prevent saturating following stages.

The device is characterized for operation over the automotive temperature range, –40°C to +125°C.  

For all available packages, see the orderable addendum at the end of the data sheet.
filter Andere Verstärker mit programmierbarer Verstärkung (PGA) und mit variabler Verstärkung (VGA) suchen
Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 1
Top-Dokumentation Typ Titel Format-Optionen Neueste englische Version herunterladen Datum
* Datenblatt THS7530-Q1 High-Speed, Fully Differential, Continuously Variable Gain Amplifier datasheet PDF | HTML 09.12.2015

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

THS7530EVM — THS7530 – Evaluierungsmodul

The THS7530 EVM provides 50 ohm input and output termination for easy evaluation with common 50 ohm test equipment.

Benutzerhandbuch: PDF
Unterstützte Produkte und Hardware
Vorrätig
Limit:
??asset.out-of-stock-ti_de_DE??
Nicht verfügbar
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
HTSSOP (PWP) 14 Ultra Librarian
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos