Home Energiemanagement Linear- und Low-Dropout-Regler (LDO)

TLV742P

AKTIV

200-mA-Low-IQ-Low-Dropout-Spannungsregler (LDO)

Produktdetails

Rating Catalog Vin (max) (V) 5.5 Vin (min) (V) 2 Iout (max) (A) 0.2 Output options Fixed Output Vout (max) (V) 5 Vout (min) (V) 0.85 Fixed output options (V) 1.1, 1.2, 1.5, 1.8, 2.5, 2.7, 2.8, 2.9, 3, 3.3 Noise (µVrms) 45 PSRR at 100 KHz (dB) 40 Iq (typ) (mA) 0.025 Features Enable, Output discharge Thermal resistance θJA (°C/W) 180.4 Load capacitance (min) (µF) 0.1 Regulated outputs (#) 1 Accuracy (%) 1.5 Dropout voltage (Vdo) (typ) (mV) 250 Operating temperature range (°C) -40 to 125
Rating Catalog Vin (max) (V) 5.5 Vin (min) (V) 2 Iout (max) (A) 0.2 Output options Fixed Output Vout (max) (V) 5 Vout (min) (V) 0.85 Fixed output options (V) 1.1, 1.2, 1.5, 1.8, 2.5, 2.7, 2.8, 2.9, 3, 3.3 Noise (µVrms) 45 PSRR at 100 KHz (dB) 40 Iq (typ) (mA) 0.025 Features Enable, Output discharge Thermal resistance θJA (°C/W) 180.4 Load capacitance (min) (µF) 0.1 Regulated outputs (#) 1 Accuracy (%) 1.5 Dropout voltage (Vdo) (typ) (mV) 250 Operating temperature range (°C) -40 to 125
X2SON (DQN) 4 1 mm² (1 mm × 1 mm)
  • Input Voltage Range From 2 V to 5.5 V
  • Fixed-Output Voltage Combinations Possible From 0.85 V to 5 V in 50-mV Steps(1)
  • 0.5% Typical Accuracy
  • High PSRR:
    • 55 dB at 1 MHz
  • IQ When Enabled: 25 µA
  • IQ When Disabled: 1 µA
  • Active Output Discharge
  • Thermal Shutdown and Overcurrent Protection
  • Package:
    • 1-mm × 1-mm DQN (X2SON)
  • Input Voltage Range From 2 V to 5.5 V
  • Fixed-Output Voltage Combinations Possible From 0.85 V to 5 V in 50-mV Steps(1)
  • 0.5% Typical Accuracy
  • High PSRR:
    • 55 dB at 1 MHz
  • IQ When Enabled: 25 µA
  • IQ When Disabled: 1 µA
  • Active Output Discharge
  • Thermal Shutdown and Overcurrent Protection
  • Package:
    • 1-mm × 1-mm DQN (X2SON)

The TLV742P series of low-dropout linear voltage regulators (LDOs) are optimized to providing excellent performance by supporting a wide output voltage range. The LDOs can directly regulate a single cell Li-ion battery input-to-output voltage as low as 0.85 V.  If used to post-regulate a DC-DC converter output, the high PSRR of 55 dB at 1 MHz suppresses ripple to provide a stable low-noise, well-regulated VOUT.

The TLV742P has an active output discharge feature that helps ensure the output is kept low while the system is disabled, in standby mode, or in sleep mode.  Additionally, overcurrent protection is present to protect the device in the event of an output short along with thermal shutdown to prevent overheating.

The TLV742P series of voltage regulators are available in a 1 mm × 1 mm X2SON package to minimize PCB area.

The TLV742P series of low-dropout linear voltage regulators (LDOs) are optimized to providing excellent performance by supporting a wide output voltage range. The LDOs can directly regulate a single cell Li-ion battery input-to-output voltage as low as 0.85 V.  If used to post-regulate a DC-DC converter output, the high PSRR of 55 dB at 1 MHz suppresses ripple to provide a stable low-noise, well-regulated VOUT.

The TLV742P has an active output discharge feature that helps ensure the output is kept low while the system is disabled, in standby mode, or in sleep mode.  Additionally, overcurrent protection is present to protect the device in the event of an output short along with thermal shutdown to prevent overheating.

The TLV742P series of voltage regulators are available in a 1 mm × 1 mm X2SON package to minimize PCB area.

Herunterladen Video mit Transkript ansehen Video

Ähnliche Produkte, die für Sie interessant sein könnten

Drop-In-Ersatz mit gegenüber dem verglichenen Baustein verbesserter Funktionalität.
TLV707P AKTIV Low-Dropout-Spannungsregler mit 200 mA, niedrigem IQ, aktiver Ausgangsentladung und -Aktivierung Previous generation of this device that is pin-to-pin
TLV773 AKTIV Low-Dropout-Spannungsregler, hohes PSRR, 300 mA, niedriger Ruhestrom mit Aktivierung General purpose LDO with higher PSRR
Selbe Funktionalität wie der verglichene Baustein bei abweichender Anschlussbelegung.
TLV700 AKTIV Low-Dropout-Spannungsregler, hohes PSRR, 200 mA, niedriger Ruhestrom, mit Aktivierung Similar device with better PSRR performance in other packages

Technische Dokumentation

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 2
Top-Dokumentation Typ Titel Format-Optionen Neueste englische Version herunterladen Datum
* Datenblatt TLV742P 200-mA, Small Size, Low-Dropout Linear Voltage Regulator datasheet PDF | HTML 14.09.2017
Auswahlhilfe Low Dropout Regulators Quick Reference Guide (Rev. P) 21.03.2018

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

TLV70728EVM-612 — TLV70728 200 mA, Low-Dropout (LDO)-Regler mit niedrigem Iq – Evaluierungsmodul

The TLV70728EVM-612 is a fully assembled and tested circuit for evaluating the TLV70728 200mA, Low IQ, Low Dropout Regulator for Portables. The TLV70728EVM-612 provides a single 2.8V regulated output.
Benutzerhandbuch: PDF
Unterstützte Produkte und Hardware
Vorrätig
Limit:
??asset.out-of-stock-ti_de_DE??
Nicht verfügbar
Simulationsmodell

TLV74211P PSpice Transient Model (Rev. A)

SBVM747A.ZIP (64 KB) - PSpice-Modell
Unterstützte Produkte und Hardware
Simulationsmodell

TLV74211P Unencrypted PSpice Transient Model

SBVM748.ZIP (2 KB) - PSpice-Modell
Unterstützte Produkte und Hardware
Simulationsmodell

TLV74212P Unencrypted PSpice Transient Model

SBVM750.ZIP (2 KB) - PSpice-Modell
Unterstützte Produkte und Hardware
Simulationsmodell

TLV74215P PSpice Transient Model

SBVM744.ZIP (64 KB) - PSpice-Modell
Unterstützte Produkte und Hardware
Simulationsmodell

TLV74215P Unencrypted PSpice Transient Model

SBVM746.ZIP (2 KB) - PSpice-Modell
Unterstützte Produkte und Hardware
Simulationsmodell

TLV74218P PSpice Transient Model

SBVM745.ZIP (67 KB) - PSpice-Modell
Unterstützte Produkte und Hardware
Simulationsmodell

TLV74218P Unencrypted PSpice Transient Model

SBVM742.ZIP (2 KB) - PSpice-Modell
Unterstützte Produkte und Hardware
Simulationsmodell

TLV74225P PSpice Transient Model

SBVM818.ZIP (65 KB) - PSpice-Modell
Unterstützte Produkte und Hardware
Simulationsmodell

TLV74225P Unencrypted PSpice Transient Model

SBVM817.ZIP (2 KB) - PSpice-Modell
Unterstützte Produkte und Hardware
Simulationsmodell

TLV74227P PSpice Transient Model

SBVM743.ZIP (64 KB) - PSpice-Modell
Unterstützte Produkte und Hardware
Simulationsmodell

TLV74227P Unencrypted PSpice Transient Model

SBVM739.ZIP (2 KB) - PSpice-Modell
Unterstützte Produkte und Hardware
Simulationsmodell

TLV74228P PSpice Transient Model (Rev. A)

SBVM737A.ZIP (64 KB) - PSpice-Modell
Unterstützte Produkte und Hardware
Simulationsmodell

TLV74228P Unencrypted PSpice Transient Model

SBVM738.ZIP (2 KB) - PSpice-Modell
Unterstützte Produkte und Hardware
Simulationsmodell

TLV74229P PSpice Transient Model

SBVM740.ZIP (64 KB) - PSpice-Modell
Unterstützte Produkte und Hardware
Simulationsmodell

TLV74229P Unencrypted PSpice Transient Model

SBVM741.ZIP (2 KB) - PSpice-Modell
Unterstützte Produkte und Hardware
Simulationsmodell

TLV74230P PSpice Transient Model

SBVM815.ZIP (65 KB) - PSpice-Modell
Unterstützte Produkte und Hardware
Simulationsmodell

TLV74230P Unencrypted PSpice Transient Model

SBVM816.ZIP (2 KB) - PSpice-Modell
Unterstützte Produkte und Hardware
Simulationsmodell

TLV74233P Unencrypted PSpice Transient Model

SBVM749.ZIP (2 KB) - PSpice-Modell
Unterstützte Produkte und Hardware
Referenzdesign

TIDA-00300 — Referenzdesign für isolierte Stromversorgungsarchitektur für Kommunikations- und analoge Eingangs-/A

Dieses Referenzdesign bietet eine Möglichkeit zur Isolierung von I2C- oder SPI-Kommunikationsleitungen. Dies wird häufig in Netzinfrastrukturanwendungen wie Schutzrelais und Leistungsschaltern benötigt, bei denen hohe Spannungen beteiligt sind. Dieses Referenzdesign bietet sowohl Stromisolierung (...)

Unterstützte Produkte und Hardware
Referenzdesign

TIDA-00420 — ADC-basierter, digital isolierter 16-Kanal-AC/DC-Wandler mit Binäreingang und großem Eingangsspannun

Dieses Referenzdesign zeigt eine kostenoptimierte und skalierbare ADC-basierte AC/DC-Architektur mit Binäreingangsmodul (BIM) und verstärkter Isolierung. Die 16 Kanäle eines 10- oder 12-Bit-SAR-ADCs werden zur Erfassung mehrerer Binäreingänge verwendet. Die Operationsverstärker halten nicht nur die (...)

Unterstützte Produkte und Hardware
Referenzdesign

TIDA-010034 — Referenzdesign für PoE nach IEEE802.3at Typ 1 und 12-V-Adaptereingang für IP-Netzwerkkamera

Power over Ethernet (PoE) ermöglicht die Stromversorgung über dasselbe Ethernet-Kabel, das auch für Daten verwendet wird, ohne die Gefahr von Übersprechen, Störungen oder Korruption der Datenströme. Dieses Referenzdesign zeigt die durchgehende Stromversorgungsarchitektur für eine (...)
Unterstützte Produkte und Hardware
Referenzdesign

TIDA-01579 — Hocheffizientes Referenzdesign für Stromversorgungen mit niedriger Ausgangswelligkeit für Bildgebung

Mit diesem Referenzdesign wird die Point-of-Load-Stromversorgungsstruktur von Videoüberwachungssystemen optimiert. Dieses Referenzdesign bietet hohe Leistung bei wichtigen Parametern wie Genauigkeit der Ausgangsspannung, Spannungswelligkeit und Wärmeableitung. Diese hohe Leistung ist mit einer (...)
Unterstützte Produkte und Hardware
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
X2SON (DQN) 4 Ultra Librarian

Bestellen & Qualität

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos