Startseite Schnittstelle USB-ICs USB-Typ-C- und USB-Stromversorgungs-ICs
Startseite
Schnittstelle
USB-ICs
USB-Typ-C- und USB-Stromversorgungs-ICs

TPS65987DDJ

NICHT FÜR NEUE DESIGNS EMPFOHLEN

USB-C® Power Delivery Controller mit integrierten Leistungsschaltern für PC-Hosts und Thunderbolt-Ge

Jetzt bestellen
Datenblatt

TPS65987DDJ

NICHT FÜR NEUE DESIGNS EMPFOHLEN
Datenblatt Jetzt bestellen

Produktdetails

Function Type-C Type PD controller Power role DRP, Sink, Source Rating Catalog Internal power path 20 V 5 A Data role DFP, DRD, UFP Alternate mode Yes External power-path control GPIO, I2C Dead battery support Yes Operating temperature range (°C) -10 to 75
Function Type-C Type PD controller Power role DRP, Sink, Source Rating Catalog Internal power path 20 V 5 A Data role DFP, DRD, UFP Alternate mode Yes External power-path control GPIO, I2C Dead battery support Yes Operating temperature range (°C) -10 to 75
VQFN (RSH) 56 49 mm² 7 x 7
  • This device is certified by the USB-IF for PD 3.0
    • PD3.0 silicon is required for certification of new USB PD designs
      • TID#: 1067
    • Article on PD2.0 vs PD3.0
  • TPS65987DDJ is a Thunderbolt 3 (TBT3) Device PD3.0 controller
    • This PD controller is only intended for use in TBT3 device designs
    • Refer to Intel Reference Design document number 569174
    • If designing something other than a TBT3 device, please refer to www.ti.com/usb-c and E2E guide
  • Integrated fully managed power paths:
    • Integrated two 5–20 V, 5-A, 25-mΩ bidirectional switches
    • UL 2367 cert#: 20190107-E169910
    • IEC 62368-1 cert#: US-34617-UL
  • Integrated robust power path protection
    • Integrated reverse current protection,undervoltage protection, overvoltage protection, and slew rate control for both 20-V/5-A power paths when configured to Sink
    • Integrated undervoltage and overvoltage protection and current limiting for inrush current protection for both 20-V/5-A power paths when configured to Source
  • USB Type-C Power Delivery (PD) controller

    • 13 configurable GPIOs

    • BC1.2 charging support
    • USB PD 3.0 certified
    • USB Type-C specification certified
    • Cable attach and orientation detection
    • Integrated VCONN switch
    • Physical layer and policy engine
    • 3.3-V LDO output for dead battery support
    • Power supply from 3.3 V or VBUS source
    • 1 I2C primary or secondary port
    • 1 I2C primary only port
    • 1 I2c secondary only port
  • This device is certified by the USB-IF for PD 3.0
    • PD3.0 silicon is required for certification of new USB PD designs
      • TID#: 1067
    • Article on PD2.0 vs PD3.0
  • TPS65987DDJ is a Thunderbolt 3 (TBT3) Device PD3.0 controller
    • This PD controller is only intended for use in TBT3 device designs
    • Refer to Intel Reference Design document number 569174
    • If designing something other than a TBT3 device, please refer to www.ti.com/usb-c and E2E guide
  • Integrated fully managed power paths:
    • Integrated two 5–20 V, 5-A, 25-mΩ bidirectional switches
    • UL 2367 cert#: 20190107-E169910
    • IEC 62368-1 cert#: US-34617-UL
  • Integrated robust power path protection
    • Integrated reverse current protection,undervoltage protection, overvoltage protection, and slew rate control for both 20-V/5-A power paths when configured to Sink
    • Integrated undervoltage and overvoltage protection and current limiting for inrush current protection for both 20-V/5-A power paths when configured to Source
  • USB Type-C Power Delivery (PD) controller

    • 13 configurable GPIOs

    • BC1.2 charging support
    • USB PD 3.0 certified
    • USB Type-C specification certified
    • Cable attach and orientation detection
    • Integrated VCONN switch
    • Physical layer and policy engine
    • 3.3-V LDO output for dead battery support
    • Power supply from 3.3 V or VBUS source
    • 1 I2C primary or secondary port
    • 1 I2C primary only port
    • 1 I2c secondary only port

The TPS65987DDJ is a single port highly integrated stand-alone USB Type-C and Power Delivery (PD) controller optimized for docking stations or monitors. The TPS65987DDJ integrates fully managed power paths with robust protection for a complete USB-C PD solution. This device is featured on Intel’s Reference Design for TBT3 end equipments ensuring the PD controller has proper system level interaction in these types of designs. This feature greatly reduces system design complexity and results in reduced time to market.

The TPS65987DDJ is a single port highly integrated stand-alone USB Type-C and Power Delivery (PD) controller optimized for docking stations or monitors. The TPS65987DDJ integrates fully managed power paths with robust protection for a complete USB-C PD solution. This device is featured on Intel’s Reference Design for TBT3 end equipments ensuring the PD controller has proper system level interaction in these types of designs. This feature greatly reduces system design complexity and results in reduced time to market.
filter Andere USB-Typ-C- und USB-Stromversorgungs-ICs suchen
Herunterladen
Weitere Informationen anfordern

Dieser integrierte Schaltkreis (IC) ist für Thunderbolt™ 3-Bausteine vorgesehen.
GUI zum Firmware-Konfigurations-Tool sowie weitere Informationen sind verfügbar. Jetzt anfordern

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 1
Typ Titel Datum
* Data sheet TPS65987DDJ USB Type-C® and USB PD Controller With Integrated Power Switches For Thunderbolt 3 Devices datasheet (Rev. B) PDF | HTML 25 Okt 2022

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort