Startseite Energiemanagement Linear- und Low-Dropout-Regler (LDO)

TPS763

AKTIV

Low-Dropout-Spannungsregler, 150 mA, 10 V, mit Aktivierung

Eine neuere Version dieses Produkts ist verfügbar

Drop-In-Ersatz mit gegenüber dem verglichenen Baustein verbesserter Funktionalität
TPS763-Q1 AKTIV 150mA 10 V Low-Drop-Out-Spannungsregler für die Automobilindustrie, mit Aktivierung Automotive version
TPS784-Q1 AKTIV LDO-Spannungsregler für den Automobilbereich, 300 mA, mit niedrigem IQ und hohem PSRR, hoher Genauig Automotive version
Selbe Funktionalität wie der verglichene Baustein bei gleicher Anschlussbelegung
TPS7A24 AKTIV Low-Dropout-Spannungsregler (LDO), 200 mA, 18 V, extrem niedriger Ruhestrom, mit Aktivierung Pin-to-pin option offering wider VIN (18 V) and ultra-low-IQ (2 µA)
Selbe Funktionalität wie der verglichene Baustein bei abweichender Anschlussbelegung
TPS709 AKTIV 150-mA, 30 V, Ultra-Low-IQ, Low-Abfallspannungsregler mit Rückstromschutz und Freigabe Next-generation version of this device with lower quiescent current and a wider input voltage range.

Produktdetails

Rating Catalog Vin (max) (V) 10 Vin (min) (V) 2.7 Iout (max) (A) 0.15 Output options Adjustable Output, Fixed Output Vout (max) (V) 5 Vout (min) (V) 1.5 Fixed output options (V) 1.6, 1.8, 2.5, 2.7, 2.8, 3, 3.1, 3.3, 3.8, 5 Noise (µVrms) 140 PSRR at 100 KHz (dB) 41 Iq (typ) (mA) 0.085 Features Enable Thermal resistance θJA (°C/W) 205 Load capacitance (min) (µF) 4.7 Regulated outputs (#) 1 Accuracy (%) 3 Dropout voltage (Vdo) (typ) (mV) 375 Operating temperature range (°C) -40 to 125
Rating Catalog Vin (max) (V) 10 Vin (min) (V) 2.7 Iout (max) (A) 0.15 Output options Adjustable Output, Fixed Output Vout (max) (V) 5 Vout (min) (V) 1.5 Fixed output options (V) 1.6, 1.8, 2.5, 2.7, 2.8, 3, 3.1, 3.3, 3.8, 5 Noise (µVrms) 140 PSRR at 100 KHz (dB) 41 Iq (typ) (mA) 0.085 Features Enable Thermal resistance θJA (°C/W) 205 Load capacitance (min) (µF) 4.7 Regulated outputs (#) 1 Accuracy (%) 3 Dropout voltage (Vdo) (typ) (mV) 375 Operating temperature range (°C) -40 to 125
SOT-23 (DBV) 5 8.12 mm² 2.9 x 2.8
  • Input voltage range VIN: 2.7V to 10V
  • Output voltage range VOUT:
    • Fixed device: 1.6V to 5.0V
    • Adjustable device: 1.5V to 6.5V
  • Output current: up-to 150mA
  • Output voltage accuracy:
    • New chip: ±1.0% (typical)
    • Legacy chip: ±2.0% (typical)
  • Low quiescent current IQ:
    • New chip: 65µA (typ) at IOUT = 0mA
    • New chip: 765µA (typ) at IOUT = 150mA
    • Legacy chip: 85µA (typ) at IOUT = 1mA to 150mA
  • Dropout voltage:
    • New chip: 175mV (typical) at IOUT = 150mA
    • Legacy chip: 360mV (typical) at IOUT = 150mA
  • Thermal shutdown and overcurrent limitation
  • Active over-shoot pulldown protection (new chip)
  • Operating junction temperature: –40°C to 125°C
  • 5-pin SOT-23 (DBV), RθJA = 178.6°C/W (new chip)
  • Input voltage range VIN: 2.7V to 10V
  • Output voltage range VOUT:
    • Fixed device: 1.6V to 5.0V
    • Adjustable device: 1.5V to 6.5V
  • Output current: up-to 150mA
  • Output voltage accuracy:
    • New chip: ±1.0% (typical)
    • Legacy chip: ±2.0% (typical)
  • Low quiescent current IQ:
    • New chip: 65µA (typ) at IOUT = 0mA
    • New chip: 765µA (typ) at IOUT = 150mA
    • Legacy chip: 85µA (typ) at IOUT = 1mA to 150mA
  • Dropout voltage:
    • New chip: 175mV (typical) at IOUT = 150mA
    • Legacy chip: 360mV (typical) at IOUT = 150mA
  • Thermal shutdown and overcurrent limitation
  • Active over-shoot pulldown protection (new chip)
  • Operating junction temperature: –40°C to 125°C
  • 5-pin SOT-23 (DBV), RθJA = 178.6°C/W (new chip)

The TPS763 family of low-dropout (LDO) linear voltage regulators supports wide input voltage range of 2.7V to 10V and up-to 150mA of load current. The output range is from 1.6V to 5.0V for fixed version, and 1.5V to 6.5V for adjustable version.

The TPS763 has a ±1.5% (across line/load/temp for the new chip) output accuracy that is required for powering digital loads with tight supply requirements. The internal soft-start circuit reduces inrush current during start-up (for new chip), thus allowing for smaller input capacitance.

The TPS763 family of low-dropout (LDO) voltage regulators offers the benefits of low-dropout voltage, low-power operation, and miniaturized packaging. These regulators feature low dropout voltages and quiescent currents compared to conventional LDO regulators. Offered in a 5-pin, small outline integrated-circuit SOT-23 package, the TPS763 series devices are and excellent choice for cost-sensitive designs and applications where board space is at a premium.

The TPS763 also features a logic-enabled sleep mode to shut down the regulator, reducing quiescent current to 1µA maximum at TJ = 25°C.

The TPS763 family of low-dropout (LDO) linear voltage regulators supports wide input voltage range of 2.7V to 10V and up-to 150mA of load current. The output range is from 1.6V to 5.0V for fixed version, and 1.5V to 6.5V for adjustable version.

The TPS763 has a ±1.5% (across line/load/temp for the new chip) output accuracy that is required for powering digital loads with tight supply requirements. The internal soft-start circuit reduces inrush current during start-up (for new chip), thus allowing for smaller input capacitance.

The TPS763 family of low-dropout (LDO) voltage regulators offers the benefits of low-dropout voltage, low-power operation, and miniaturized packaging. These regulators feature low dropout voltages and quiescent currents compared to conventional LDO regulators. Offered in a 5-pin, small outline integrated-circuit SOT-23 package, the TPS763 series devices are and excellent choice for cost-sensitive designs and applications where board space is at a premium.

The TPS763 also features a logic-enabled sleep mode to shut down the regulator, reducing quiescent current to 1µA maximum at TJ = 25°C.

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 6
Typ Titel Datum
* Data sheet TPS763 150mA, 10V, Low-Dropout Voltage Regulator datasheet (Rev. K) PDF | HTML 01 Dez 2025
Analog Design Journal 3Q 2011 Issue Analog Applications Journal 16 Sep 2011
Analog Design Journal Isolated RS-485 transceivers support DMX512 stage lighting & special-effects app 16 Sep 2011
Analog Design Journal Interfacing high-voltage applications to low-power controllers 15 Nov 2010
Application note TPS6010x/TPS6011x Charge Pump (Rev. A) 16 Dez 1999
Application brief Low Power 150-mA LDO Linear Regulators. Extended Output Voltage Adjustment Range 11 Jun 1999

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

AMC1303EVM — AMC1303 kleines, sehr präzises, verstärktes, isoliertes Modulator-Evaluierungsmodul

Die AMC1303-Bausteine sind 1-Bit-Modulatoren mit einem Ausgangspuffer, der von der Schnittstellenschaltung am Eingang durch eine Isolierungsbarriere aus Siliziumdioxid (SiO2) getrennt ist. Die Isolierungsbarriere bietet eine galvanische Trennung bis zu 8000 VPEAK. Bei Verwendung mit einem FPGA oder (...)
Benutzerhandbuch: PDF
Evaluierungsplatine

AMC1336EVM — ;AMC1336 Evaluierungsmodul mit verstärktem isoliertem Delta-Sigma-Modulator zur Spannungsmessung

Das AMC1336-Evaluierungsmodul (EVM) ist eine Plattform zur Evaluierung des Bausteins AMC1336, eines verstärkten und isolierten Delta-Sigma-Modulators für die Spannungsmessung. Der AMC1336 ist ein 1-Bit-Modulator mit einem Ausgangspuffer, der von der Schnittstellenschaltung am Eingang durch eine (...)

Benutzerhandbuch: PDF
Evaluierungsplatine

BQ40Z80EVM-020 — BQ40Z80 2s–7s-Batterieanzeige – Evaluierungsmodul

Der bq40z80 EVM enthält einen bq40z80, zwei sekundäre bq771807-Protektoren und eine Verbindung zu Microsoft Windows-basierter PC-Software, die verwendet werden kann, um die Kapazität zu überwachen und vorherzusagen, den Zellausgleich durchzuführen, kritische Parameter zu überwachen und die Zellen (...)
Benutzerhandbuch: PDF | HTML
Evaluierungsplatine

BQ76942EVM — Überwachungs- und Schutzbaustein-EVM für Lithium-Ionen-, Li-Polymer- und LiFePO4-Akkupacks mit 3 bis

Das BQ76942EVM-Evaluierungsmodul (EVM) ist ein komplettes Evaluierungssystem für den integrierten Schaltkreis BQ76942 zur Überwachung von Li-Ion-Batterien (3 bis 10 Zellen). Das EVM besteht aus einem BQ76942-Schaltungsmodul, das zur einfachen Evaluierung der BQ76942-Überwachungsfunktion verwendet (...)

Benutzerhandbuch: PDF
Evaluierungsplatine

BQ76952EVM — Evaluierungsmodul für Batterieüberwachungs- und Schutzbaustein für Lithium-Ionen-, Li-Polymer- und L

Das BQ76952EVM-Evaluierungsmodul (EVM) ist ein komplettes Evaluierungssystem für den integrierten Schaltkreis BQ76952 zur Überwachung von Li-Ion-Batterien (3 bis 16 Zellen). Das EVM besteht aus einem BQ76952-Schaltungsmodul, das zur einfachen Evaluierung der BQ76952-Überwachungsfunktion verwendet (...)

Benutzerhandbuch: PDF
Nicht verfügbar auf TI.com
Evaluierungsplatine

DEM-SOT23LDO — DEM-SOT23LDO-kompatibel mit den meisten LDO-Reglern mit positivem Ausgang im 5- oder 6-Kanal-SOT23-G

Benutzerhandbuch: PDF
Simulationsmodell

TPS76301 PSpice Transient Model

SLVMAV9.ZIP (41 KB) - PSpice Model
Simulationsmodell

TPS76301 Unencrypted PSpice Transient Model

SLVMAV8.ZIP (2 KB) - PSpice Model
Simulationsmodell

TPS76316 PSpice Transient Model

SLVMAV7.ZIP (70 KB) - PSpice Model
Simulationsmodell

TPS76316 Unencrypted PSpice Transient Model

SLVMAV6.ZIP (2 KB) - PSpice Model
Simulationsmodell

TPS76318 PSpice Transient Model

SLVMAX1.ZIP (67 KB) - PSpice Model
Simulationsmodell

TPS76318 Unencrypted PSpice Transient Model

SLVMAX0.ZIP (2 KB) - PSpice Model
Simulationsmodell

TPS76325 PSpice Transient Model

SLVMAW5.ZIP (67 KB) - PSpice Model
Simulationsmodell

TPS76325 Unencrypted PSpice Transient Model

SLVMAW4.ZIP (2 KB) - PSpice Model
Simulationsmodell

TPS76327 PSpice Transient Model

SLVMAW6.ZIP (68 KB) - PSpice Model
Simulationsmodell

TPS76327 Unencrypted PSpice Transient Model

SLVMAW7.ZIP (2 KB) - PSpice Model
Simulationsmodell

TPS76328 PSpice Transient Model

SLVMAV4.ZIP (69 KB) - PSpice Model
Simulationsmodell

TPS76328 Unencrypted PSpice Transient Model

SLVMAV5.ZIP (2 KB) - PSpice Model
Simulationsmodell

TPS76330 PSpice Transient Model

SLVMAW0.ZIP (69 KB) - PSpice Model
Simulationsmodell

TPS76330 Unencrypted PSpice Transient Model

SLVMAW1.ZIP (2 KB) - PSpice Model
Simulationsmodell

TPS76333 PSpice Transient Model

SLVMAW3.ZIP (68 KB) - PSpice Model
Simulationsmodell

TPS76333 Unencrypted PSpice Transient Model

SLVMAW2.ZIP (2 KB) - PSpice Model
Simulationsmodell

TPS76338 PSpice Transient Model

SLVMAV2.ZIP (70 KB) - PSpice Model
Simulationsmodell

TPS76338 Unencrypted PSpice Transient Model

SLVMAV3.ZIP (2 KB) - PSpice Model
Simulationsmodell

TPS76350 PSpice Transient Model

SLVMAW9.ZIP (70 KB) - PSpice Model
Simulationsmodell

TPS76350 Unencrypted PSpice Transient Model

SLVMAW8.ZIP (2 KB) - PSpice Model

Viele TI-Referenzdesigns beinhalten TPS763

Mit unserem Referenzdesign-Auswahltool können Sie die für Ihre Anwendung und Ihre Parameter am besten geeigneten Designs durchsehen und ermitteln.

Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
SOT-23 (DBV) 5 Ultra Librarian

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos