The TRS3222E consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV ESD protection pin to pin (serial-port connection pins, including GND).
The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The device operates at typical data signaling rates up to 500 kbit/s and a maximum of 30-V/µs driver output slew rate.
The TRS3222E can be placed in the power-down mode by setting the power-down ( PWRDOWN) input low, which draws only 1 µA from the power supply. When the device is powered down, the receivers remain active while the drivers are placed in the high-impedance state. Also, during power down, the onboard charge pump is disabled; V+ is lowered to VCC, and V– is raised toward GND. Receiver outputs also can be placed in the high-impedance state by setting enable ( EN) high.
| Typ | Titel | Datum | ||
|---|---|---|---|---|
| * | Data sheet | 3-V to 5.5-V Multichannel RS-232 Line Driver and Receiverwith ±15-kV ESD Protection datasheet (Rev. A) | PDF | HTML | 27 Aug 2021 |
| Application note | AN-438 Low Power RS-232C Driver and Receiver in CMOS (Rev. B) | 26 Apr 2013 | ||
| Application note | Understanding Power Requirements in RS-232 Applications (Rev. B) | 26 Apr 2013 | ||
| Application note | Removing Ground Noise in Data Transmission Systems | 05 Okt 2007 | ||
| More literature | RS-232 IEC ESD-Protected Devices From TI (Rev. A) | 27 Jul 2007 | ||
| Application note | Interface Circuits for TIA/EIA-232-F (Rev. A) | 19 Sep 2002 | ||
| Application note | Low-Voltage, Single-Supply 232-Standard Interface Solutions (Rev. A) | 19 Sep 2000 |
Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.
| Gehäuse | Pins | Herunterladen |
|---|---|---|
| TSSOP (PW) | 20 | Optionen anzeigen |
Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.
Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.
Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support.