Startseite Schnittstelle USB-ICs USB-Hubs und -Controller
Startseite
Schnittstelle
USB-ICs
USB-Hubs und -Controller

TUSB8040

NICHT FÜR NEUE DESIGNS EMPFOHLEN

SuperSpeed USB (USB 3.0)-Hub-Controller mit 4 Anschlüssen

Jetzt bestellen
Datenblatt
Fehlerverzeichnis
TUSB8040 wird nicht für neue Designs empfohlen
Dieses Produkt ist weiterhin für Bestandskunden erhältlich. Neue Designs sollten ein alternatives Produkt erwägen.
open-in-new Alternativen vergleichen
Ähnliche Funktionalität wie verglichener Baustein
TUSB8042A AKTIV Hub für USB 3.2 x1 gen1, vier Anschlüsse This replacement device is a newer generation compliant with the latest USB specifications.

TUSB8040

NICHT FÜR NEUE DESIGNS EMPFOHLEN
Datenblatt Jetzt bestellen

Produktdetails

Function USB3 USB speed (Mbps) 5000 Type Hub Supply voltage (V) 1.1, 3.3 Rating Catalog Operating temperature range (°C) 0 to 70
Function USB3 USB speed (Mbps) 5000 Type Hub Supply voltage (V) 1.1, 3.3 Rating Catalog Operating temperature range (°C) 0 to 70
HTQFP (PFP) 80 196 mm² 14 x 14 WQFN-MR (RKM) 100 81 mm² 9 x 9
    • USB 3.0 Compliant Four Port Hub, TID# 330000003
      • Upstream Port Supports SuperSpeed, High-Speed
        and Full-Speed Connections
      • Each of the Four Downstream Ports Support SuperSpeed,
        High-Speed, Full-Speed/Low-Speed Connections
    • USB 2.0 Hub Features
      • Multi Transaction Translator (MTT) Hub:
        Four Transaction Translators, One Per Port
      • Four (Over USB Required Minimum of Two) Asynchronous
        Endpoint Buffers Per Transaction Translator for
        Better Throughput
    • Supports Charging Downstream Port (CDP) Applications
      • Battery Charging 1.2 Compliant
    • Supports Operation as a USB 3.0 or USB 2.0 Compound
      Device
    • Supports Per Port or Ganged Power Switching and
      Over-Current Protection
    • Provides the following status outputs:
      • High-Speed Upstream Connection
      • High-Speed Upstream Port Suspended
      • SuperSpeed Upstream Connection
      • SuperSpeed Upstream Port Suspended
    • Optional Serial EEPROM or SMBus Slave Interface
      for Custom Configurations:
      • VID/PID
      • Manufacturer and Product Strings
      • Serial Number
    • Using Pin Selection or the EEPROM/SMBus Slave
      Interface, Each Downstream Port Can Be
      Independently:
      • Enabled or Disabled
      • Marked as Removable or Permanently Attached
        (for Compound Applications)
      • Have Battery Charging Enabled or Disabled
    • Provides 128-Bit Universally Unique Identifier (UUID)
    • Optionally Supports USB 2.0 Compliant Port Indicator LEDs
    • Configurable SMBus Address to Support Multiple Devices
      on the Same SMBus Segment
    • the USB 2.0 Upstream Port
    • Single Clock Input, 24-MHz Crystal or Oscillator
    • No Special Driver Requirements; Works Seamlessly With
      Any Operating System With USB Stack Support
    • USB 3.0 Compliant Four Port Hub, TID# 330000003
      • Upstream Port Supports SuperSpeed, High-Speed
        and Full-Speed Connections
      • Each of the Four Downstream Ports Support SuperSpeed,
        High-Speed, Full-Speed/Low-Speed Connections
    • USB 2.0 Hub Features
      • Multi Transaction Translator (MTT) Hub:
        Four Transaction Translators, One Per Port
      • Four (Over USB Required Minimum of Two) Asynchronous
        Endpoint Buffers Per Transaction Translator for
        Better Throughput
    • Supports Charging Downstream Port (CDP) Applications
      • Battery Charging 1.2 Compliant
    • Supports Operation as a USB 3.0 or USB 2.0 Compound
      Device
    • Supports Per Port or Ganged Power Switching and
      Over-Current Protection
    • Provides the following status outputs:
      • High-Speed Upstream Connection
      • High-Speed Upstream Port Suspended
      • SuperSpeed Upstream Connection
      • SuperSpeed Upstream Port Suspended
    • Optional Serial EEPROM or SMBus Slave Interface
      for Custom Configurations:
      • VID/PID
      • Manufacturer and Product Strings
      • Serial Number
    • Using Pin Selection or the EEPROM/SMBus Slave
      Interface, Each Downstream Port Can Be
      Independently:
      • Enabled or Disabled
      • Marked as Removable or Permanently Attached
        (for Compound Applications)
      • Have Battery Charging Enabled or Disabled
    • Provides 128-Bit Universally Unique Identifier (UUID)
    • Optionally Supports USB 2.0 Compliant Port Indicator LEDs
    • Configurable SMBus Address to Support Multiple Devices
      on the Same SMBus Segment
    • the USB 2.0 Upstream Port
    • Single Clock Input, 24-MHz Crystal or Oscillator
    • No Special Driver Requirements; Works Seamlessly With
      Any Operating System With USB Stack Support

The TUSB8040 is USB 3.0 compliant hub available in an 80-pin QFP package. The device is designed for operation over the commercial temperature range of 0°C to 70°C.

The TUSB8040 provides simultaneous SuperSpeed and high-speed/full-speed connections on the upstream port and provides SuperSpeed, high-speed, full-speed, or low-speed connections on the downstream ports. When the upstream port is connected to an electrical environment that only supports high-speed or full-speed/low-speed connections, SuperSpeed connectivity is disabled on the downstream ports. When the upstream port is connected to an electrical environment that only supports full-speed/lowspeed connections, SuperSpeed and high-speed connectivity are disabled on the downstream ports.

The TUSB8040 supports up to four downstream ports. It may be configured to report one to four downstream ports by pin selection or an attached EEPROM or SMBus controller. The configuration options provide the ability to scale the device by application.

The TUSB8040 is USB 3.0 compliant hub available in an 80-pin QFP package. The device is designed for operation over the commercial temperature range of 0°C to 70°C.

The TUSB8040 provides simultaneous SuperSpeed and high-speed/full-speed connections on the upstream port and provides SuperSpeed, high-speed, full-speed, or low-speed connections on the downstream ports. When the upstream port is connected to an electrical environment that only supports high-speed or full-speed/low-speed connections, SuperSpeed connectivity is disabled on the downstream ports. When the upstream port is connected to an electrical environment that only supports full-speed/lowspeed connections, SuperSpeed and high-speed connectivity are disabled on the downstream ports.

The TUSB8040 supports up to four downstream ports. It may be configured to report one to four downstream ports by pin selection or an attached EEPROM or SMBus controller. The configuration options provide the ability to scale the device by application.
filter Andere USB-Hubs und -Controller suchen
Herunterladen

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 2
Typ Titel Datum
* Data sheet TUSB8040 USB 3.0 Four Port Hub datasheet (Rev. I) 27 Sep 2013
* Errata TUSB8040 Errata (Rev. F) 01 Okt 2012

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort