DLP6500FLQ

ACTIVO

Dispositivo digital de microespejos (DMD) DLP® de tipo A 1080p de 0.65 pulgadas

Detalles del producto

Illumination wavelength (min) (nm) 400 Illumination wavelength (max) (nm) 700 Display resolution (max) 1080p (1920x1080) Pattern rate, binary (max) (Hz) 11574 Pattern rate, 8-bit (max) (Hz) 1446 Array diagonal (in) 0.65 Micromirror array size 1920 x 1080 Micromirror pitch (mm) 0.0076 Micromirror array orientation Orthogonal Rating Catalog Operating temperature range (°C) 0 to 65
Illumination wavelength (min) (nm) 400 Illumination wavelength (max) (nm) 700 Display resolution (max) 1080p (1920x1080) Pattern rate, binary (max) (Hz) 11574 Pattern rate, 8-bit (max) (Hz) 1446 Array diagonal (in) 0.65 Micromirror array size 1920 x 1080 Micromirror pitch (mm) 0.0076 Micromirror array orientation Orthogonal Rating Catalog Operating temperature range (°C) 0 to 65
DLP-TYPEA.7 (FLQ) 203 1290.32 mm² (0 mm × 0 mm)
  • High Resolution 1080p (1920×1080) Array With >2 Million Micromirrors
    • 0.65-Inch Micromirror Array Diagonal
    • 7.56 µm Micromirror Pitch
    • ±12° Micromirror Tilt Angle (Relative to Flat State)
    • Designed for Corner Illumination
  • Designed for Use With Broadband Visible Light (400 nm – 700 nm)
    • Window Transmission 97% (Single Pass, Through Two Window Surfaces)
    • Micromirror Reflectivity 88%
    • Array Diffraction Efficiency 86%
    • Array Fill Factor 92%
  • Two 16-Bit, Low Voltage Differential Signaling (LVDS), Double Data Rate (DDR) Buses
  • Two Dedicated Controller Options at 400 MHz Input Data Clock Rate
  • DLPC900 Digital Controller
    • Up to 9523 Hz (1-Bit Binary Patterns)
    • Up to 19.7 Giga-bits Per Second (1-Bit Binary Patterns)
    • Up to 1031 Hz (8-Bit Gray Patterns Pre-Loaded With Illumination Modulation), External Input Up to 360 Hz
  • DLPC910 Digital Controller
    • Up to 11574 Hz (1-Bit Binary Patterns)
    • Up to 24 Giga-bits Per Second (1-Bit Binary Patterns)
    • Up to 1446 Hz (8-Bit Gray Patterns With Illumination Modulation)
  • Integrated Micromirror DriverCircuitry
  • Hermetic Package
  • High Resolution 1080p (1920×1080) Array With >2 Million Micromirrors
    • 0.65-Inch Micromirror Array Diagonal
    • 7.56 µm Micromirror Pitch
    • ±12° Micromirror Tilt Angle (Relative to Flat State)
    • Designed for Corner Illumination
  • Designed for Use With Broadband Visible Light (400 nm – 700 nm)
    • Window Transmission 97% (Single Pass, Through Two Window Surfaces)
    • Micromirror Reflectivity 88%
    • Array Diffraction Efficiency 86%
    • Array Fill Factor 92%
  • Two 16-Bit, Low Voltage Differential Signaling (LVDS), Double Data Rate (DDR) Buses
  • Two Dedicated Controller Options at 400 MHz Input Data Clock Rate
  • DLPC900 Digital Controller
    • Up to 9523 Hz (1-Bit Binary Patterns)
    • Up to 19.7 Giga-bits Per Second (1-Bit Binary Patterns)
    • Up to 1031 Hz (8-Bit Gray Patterns Pre-Loaded With Illumination Modulation), External Input Up to 360 Hz
  • DLPC910 Digital Controller
    • Up to 11574 Hz (1-Bit Binary Patterns)
    • Up to 24 Giga-bits Per Second (1-Bit Binary Patterns)
    • Up to 1446 Hz (8-Bit Gray Patterns With Illumination Modulation)
  • Integrated Micromirror DriverCircuitry
  • Hermetic Package

Featuring over 2 million micromirrors in a hermetic package, the high resolution 0.65 1080p digital micromirror device (DMD) is a spatial light modulator (SLM) that modulates the amplitude, direction, and/or phase of incoming light. The unique capability and value offered by the DLP6500, including operation at 405nm, makes it well suited to support a wide variety of industrial, medical, and advanced imaging applications. Reliable function and operation of the DLP6500 requires that it be used in conjunction with the DLPC900 or the DLPC910 digital controllers. This dedicated chipset provides full HD resolution at high speeds and can be easily integrated into a variety of end equipment solutions.

Featuring over 2 million micromirrors in a hermetic package, the high resolution 0.65 1080p digital micromirror device (DMD) is a spatial light modulator (SLM) that modulates the amplitude, direction, and/or phase of incoming light. The unique capability and value offered by the DLP6500, including operation at 405nm, makes it well suited to support a wide variety of industrial, medical, and advanced imaging applications. Reliable function and operation of the DLP6500 requires that it be used in conjunction with the DLPC900 or the DLPC910 digital controllers. This dedicated chipset provides full HD resolution at high speeds and can be easily integrated into a variety of end equipment solutions.

Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Funcionalidad similar a la del dispositivo comparado
DLP670S ACTIVO Dispositivo digital de microespejos (DMD) DLP® 2716x1600 de 0.67 pulgadas Higher resolution
DLP5500 ACTIVO Dispositivo digital de microespejos (DMD) DLP® XGA de 0.55 pulgadas Lower price
DLP9000 ACTIVO Dispositivo digital de microespejos (DMD) DLP® WQXGA de 0.9 pulgadas Higher resolution
DLP7000 ACTIVO Dispositivo digital de microespejos (DMD) DLP® XGA de 0.7 pulgadas Faster pattern rate
DLP6500FYE ACTIVO Dispositivo digital de microespejos (DMD) DLP® s600 1080p de 0.65 pulgadas Lower price

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 13
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos DLP6500 0.65 1080p MVSP Type A DMD datasheet (Rev. A) PDF | HTML 31/10/2016
* Errata DLP® Products Advisory for the DLPR410 and DLPR910 Devices PDF | HTML 16/02/2023
Guía del usuario DMD Diffraction Efficiency Calculator (Rev. B) PDF | HTML 9/01/2026
Informe Using Lasers With DLP DMD Technology (Rev. A) PDF | HTML 25/08/2025
Application brief Highly Scalable TI DLP Technology for 3D Machine Vision (Rev. A) PDF | HTML 22/08/2025
Nota sobre la aplicación Digital Micromirror Device Thermal Considerations Including Pulsed Optical Sources (Rev. B) PDF | HTML 4/04/2024
Nota sobre la aplicación DMD Optical Efficiency for Visible Wavelengths (Rev. B) PDF | HTML 10/04/2023
Nota sobre la aplicación Wavelength Transmittance Considerations for DLP DMD Windows (Rev. E) 17/12/2019
Nota sobre la aplicación Mounting Hardware and Quick Reference Guide for DLP® Advanced Light Control DMDs (Rev. A) PDF | HTML 27/11/2018
Nota sobre la aplicación DMD 101: Introduction to Digital Micromirror Device (DMD) Technology (Rev. B) 23/02/2018
Guía del usuario TIDA-00362 High-Resolution 3D Scanner for Factory Automation Using DLP Tech (Rev. A) 9/05/2016
Artículo técnico Printing up the future of innovation with direct imaging lithography PDF | HTML 29/12/2015
Nota sobre la aplicación Geometric Optics for DLP® 5/12/2013

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

DLPLCR65FLQEVM — Módulo de evaluación DLP6500FLQ para dispositivo digital de microespejos (DMD) DLP® tipo A de 0.65 p

El DLPLCR65FLQEVM aloja el DLP6500FLQ, un DMD de tipo A de 0.65 y 1080p que contiene microespejos de 1920 × 1080 con un paso de 7.56 µm. Combinado con el DLPLCRC910EVM, los usuarios obtienen un control rápido y preciso de píxeles de patrones de 1 bit. Esta plataforma proporciona flexibilidad y alta (...)

Guía del usuario: PDF | HTML
Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
Placa de evaluación

DLI-3P-DLI6500 — Kit de desarrollo DLi6500 1080p para DLP6500

The DLi6500 development kit includes the DLPC900 digital controller and supports two .65” 1080p resolution DMDs, either the DLP6500FYE or the DLP6500FLQ. At the heart of the DLi6500 development kit is the DLPC900 digital controller. The DLPC900 allows for high-speed binary pattern rates (...)
Guía del usuario: PDF
Productos y hardware compatibles
Placa de evaluación

VIALUX-3P-SUPER-910 — Módulos V ViALUX SuperSpeed para DLPC910

ViALUX’ SuperSpeed v-modules provide complete subsystems containing a controller board for DLPC910, a digital micromirror device (DLP6500FLQ or DLP9000X) and ALP-4 controller suite software. The industrial grade modules support high-performance pixel level control out-of-the-box. Designed for (...)

Desde: ViALUX
Productos y hardware compatibles
Módulo óptico

INV-3P-IKARUS — Motor de iluminación de Full HD In-Vision IKARUS para DLP6500 

Ikarus II de In-Vision pertenece a una familia de módulos de motor de iluminación que utilizan iluminación de longitud de onda azul para aplicaciones de impresión 3D. Basada en el conjunto de chips DLP6500, Ikarus II ofrece soluciones rentables sin comprometer el rendimiento óptico. Existe una gran (...)

Productos y hardware compatibles
Módulo óptico

INV-3P-MERCURY — In-Vision Mercury, motor de luces de metrología 3D basado en DLP6500

Designed for 3D metrology, scanning and mapping applications, the Mercury light engine is based on TI’s DLP6500 chipset and projects patterns with a resolution of 1440x1080 pixels and an aspect ratio of 4:3. The optical system offers a high depth-of-field, low distortion as well as high MTF values.

Productos y hardware compatibles
Módulo óptico

VIALUX-3P-DLP6500FLQ-I — Módulos ópticos de ViALUX GmbH para uso industrial con DLP6500FLQ

ViALUX GmbH es una empresa independiente de terceros con experiencia en el diseño y la fabricación de módulos ópticos, un conjunto compacto que incluye un dispositivo de microespejo digital, una fuente de iluminación, y óptica y mecánica asociadas, para aplicaciones industriales que usan el (...)
Desde: ViALUX
Productos y hardware compatibles
Módulo óptico

VIALUX-3P-STAR-065 — Módulo óptico ViALUX STAR-065 para DLP6500

ViALUX’s STAR-065 CORE provides compact optics with options designed for DLP6500FYE or DLP6500FLQ (0.65” 1080p DMDs). It is available as an accessory or an evaluation module with a monochrome high-power LED light source for use with DLP® LightCrafter™ 6500 EVM.

Refer to the ordering links below for (...)
Guía del usuario: PDF
Desde: ViALUX
Productos y hardware compatibles
Módulo óptico

WDST-3P-PRO6500 — Motor óptico de producción Wintech PRO6500

Wintech’s PRO6500 provides a modular, production ready optical engine supporting 0.65” 1080p resolution DMDs – the DLP6500FYE and DLP6500FLQ. This optical engine is optimized for 3D printing, 3D measurement and machine vision applications requiring maximum optical intensity.
Productos y hardware compatibles
Kit de desarrollo de software (SDK)

DLP-ALC-LIGHTCRAFTER-SDK — SDK con control de luz avanzado DLP® para controladores en serie LightCrafter™

This DLP® Software Development Kit (SDK) supports the DLPC900 controller used in multiple DLP Advanced Light Control LightCrafter™ series evaluation modules. The SDK provides APIs to integrate DLP technology with cameras to create 3D machine vision or 3D printer solutions for a variety of (...)

Productos y hardware compatibles
Firmware

DLPC900REF-SW — DLP® LightCrafter 6500 and 9000 Firmware and Software Bundle

Texas Instruments ofrece descargas gratuitas de software y firmware para proporcionar a los desarrolladores flexibilidad y control avanzado de los EVM DLP LightCrafter 6500 y DLP LightCrafter 9000. La documentación de diseño de referencia permite a los clientes desarrollar productos personalizados (...)

Productos y hardware compatibles
Firmware

DLPR900PROM — DLPC900 Configuration and Support Firmware

The DLPR900 configuration and support firmware enables broad functionality of the DLPC900 digital controller. The DLPC900 offers reliable operation of DLP670S, DLP6500FYE, DLP6500FLQ, and DLP9000 digital micromirror devices (DMDs). Combined with the DLPC900 controller, the DLPR900 firmware (...)

Productos y hardware compatibles
GUI para el módulo de evaluación (EVM)

DLPC910REF-SW — DLPC910 reference software for the DLPLCRC910EVM

DLPC910 reference software for the DLPLCRC910EVM
Productos y hardware compatibles
Modelo de simulación

DLP6500FLQ IBIS Model

DLPM007.ZIP (19 KB) - Modelo IBIS
Productos y hardware compatibles
Geometría mecánica del DMD 3D

DLP-FLQ-2509321-3D-DMD — DLP6500 DMD con paquete FLQ (7Type-A) Geometría 3D-CAD

This file is a 3D-CAD model of the DMD geometry for use when designing the DMD mounting
Productos y hardware compatibles
Herramienta de cálculo

DMD-DIFFRACTION-EFFICIENCY-CALCULATOR — Calculator helps model DMD diffraction patterns and diffraction efficiency

This calculator will be used to help customers understand how to model DMD diffraction patterns and efficiency with their specific DMD input parameters and is modeled to the customer’s specific design. Optical modules can also be used with the calculator.
Productos y hardware compatibles
Herramienta de diseño

DLP-OMM-SEARCH — Herramientas de búsqueda de productos de terceros DLP®

To best meet your design needs and accelerate your time-to-market, DLP® Products works with a variety of third parties to help with everything from optical modules and hardware design to specialty software and other production services. Download one or both search tools listed below to quickly (...)

Productos y hardware compatibles
Herramienta de diseño

DLP-OPTICAL-DESIGN — DLP-OPTICAL-DESIGN-GUIDELINES

The DLP optical design guidelines presentation provides a comprehensive overview of the guidelines specific to designing an optical system with DLP Products and will help enable customers in their design process.
Productos y hardware compatibles
Herramienta de diseño

DLPR110 — DLPLCR65FLQEVM Design Files

Productos y hardware compatibles
Herramienta de diseño

DLI-3P-ACCESSORIES — Accesorios y conjuntos DLi para productos DLP®

Digital Light Innovations (DLi) offers accessories, boards, and assemblies for development and production with DLP® Products. Examples include DMD controller boards, DMD board assemblies, flex cables, DMD mounting hardware assemblies, LED driver boards, and LED & fiber illumination assemblies.
  • (...)
Productos y hardware compatibles
Diseños de soluciones de montaje de DMD

DLP-7TYPEA-203I-MOUNTING — TypeA 7Size DMD (203i) mounting and electrical interconnect information

This file includes drawings and 3D-CAD models for Type-A 7 ceramic size DMD mounting concept(s). Information is also included for the socket/interposer used to connect the DMD to a PCB.
Productos y hardware compatibles
Diseño de referencia

TIDA-00362 — Escáner 3D de alta resolución para la automatización de fábrica con tecnología DLP®

The Factory Automation reference design employs the Texas Instruments DLP® Advanced Light Control Software Development Kit (SDK) for LightCrafter™ series controllers, which allows developers to easily construct 3D point clouds by integrating TI’s digital micromirror device (DMD) technology (...)

Productos y hardware compatibles
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
DLP-TYPEA.7 (FLQ) 203 Ultra Librarian

Pedidos y calidad

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Serie de videos

Ver todos los videos

Videos