DP83849ID

ACTIVO

Transceptor PHY Ethernet de 10/100 Mbps de doble puerto y temperatura industrial con soporte de f

Haga su pedido ahora

Hoja de datos

document-pdfAcrobat PHYTER DUAL Ind Temp w/Fiber Support Dual Port 10/100 Mb/s Ethernet PHY X-ceiver datasheet (Rev. E) (Inglés)

DP83849ID

ACTIVO

Hoja de datos

Haga su pedido ahora

Detalles del producto

Datarate (Mbps)

10/100

Interface type

MII, RMII, SNI

Rating

Catalog

Number of ports

Dual

Features

Cable diagnostics, FX support, JTAG1149.1

I/O supply voltage (typ) (V)

3.3

Operating temperature range (°C)

-40 to 85

Number of LEDs

6

ESD HBM (kV)

4

Datarate (Mbps)

10/100

Interface type

MII, RMII, SNI

Rating

Catalog

Number of ports

Dual

Features

Cable diagnostics, FX support, JTAG1149.1

I/O supply voltage (typ) (V)

3.3

Operating temperature range (°C)

-40 to 85

Number of LEDs

6

ESD HBM (kV)

4

TQFP (PFC)

80

196 mm² (14 mm × 14 mm)

Low-power 3.3V, 0.18μm CMOS technology
Low power consumption <600mW Typical
3.3V MAC Interface
Auto-MDIX for 10/100 Mb/s
Energy Detection Mode
Dynamic Integrity Utility
Dynamic Link Quality Monitoring
TDR based Cable Diagnostic and Cable Length Detection
Optimized Latency for Real Time Ethernet Operation
Reference Clock out
RMII Rev. 1.2 Interface (configurable)
SNI Interface (configurable)
MII Serial Management Interface (MDC and MDIO)
IEEE 802.3u MII
IEEE 802.3u Auto-Negotiation and Parallel Detection
IEEE 802.3u ENDEC, 10BASE-T transceivers and filters
IEEE 802.3u PCS, 100BASE-TX transceivers and filters
IEEE 802.3u 100BASE-FX Fiber Interface
IEEE 1149.1 JTAG
Integrated ANSI X3.263 compliant TP-PMD physical sub-layer with adaptive equalization and Baseline Wander compensation
Programmable LED support for Link, 10 /100 Mb/s Mode, Activity, Duplex and Collision Detect
Single register access for complete PHY status
10/100 Mb/s packet BIST (Built in Self Test)
80-pin TQFP package (12mm x 12mm)

Low-power 3.3V, 0.18μm CMOS technology
Low power consumption <600mW Typical
3.3V MAC Interface
Auto-MDIX for 10/100 Mb/s
Energy Detection Mode
Dynamic Integrity Utility
Dynamic Link Quality Monitoring
TDR based Cable Diagnostic and Cable Length Detection
Optimized Latency for Real Time Ethernet Operation
Reference Clock out
RMII Rev. 1.2 Interface (configurable)
SNI Interface (configurable)
MII Serial Management Interface (MDC and MDIO)
IEEE 802.3u MII
IEEE 802.3u Auto-Negotiation and Parallel Detection
IEEE 802.3u ENDEC, 10BASE-T transceivers and filters
IEEE 802.3u PCS, 100BASE-TX transceivers and filters
IEEE 802.3u 100BASE-FX Fiber Interface
IEEE 1149.1 JTAG
Integrated ANSI X3.263 compliant TP-PMD physical sub-layer with adaptive equalization and Baseline Wander compensation
Programmable LED support for Link, 10 /100 Mb/s Mode, Activity, Duplex and Collision Detect
Single register access for complete PHY status
10/100 Mb/s packet BIST (Built in Self Test)
80-pin TQFP package (12mm x 12mm)

The number of applications requiring Ethernet Connectivity continues to expand. Along with this increased market demand is a change in application requirements. Where single channel Ethernet used to be sufficient, many applications such as wireless remote base stations and industrial networking now require DUAL Port functionality for redundancy or system management.

The DP83849ID is a highly reliable, feature rich device perfectly suited for industrial applications enabling Ethernet on the factory floor. The DP83849ID features two fully independent 10/100 ports for multi-port applications.

The DP83849ID provides optimum flexibility in MPU selection by supporting both MII and RMII interfaces. The device also provides flexibility by supporting both copper and fiber media.

In addition this device includes a powerful new diagnostics tool to ensure initial network operation and maintenance. In addition to the TDR scheme, commonly used for detecting faults during installation, NATIONAL's innovative cable diagnostics provides for real time continuous monitoring of the link quality. This allows the system designer to implement a fault prediction mechanism to detect and warn of changing or deteriorating link conditions.

With the DP83849ID, National Semiconductor continues to build on its Ethernet expertise and leadership position by providing a powerful combination of features and flexibility, easing Ethernet implementation for the system designer.

The number of applications requiring Ethernet Connectivity continues to expand. Along with this increased market demand is a change in application requirements. Where single channel Ethernet used to be sufficient, many applications such as wireless remote base stations and industrial networking now require DUAL Port functionality for redundancy or system management.

The DP83849ID is a highly reliable, feature rich device perfectly suited for industrial applications enabling Ethernet on the factory floor. The DP83849ID features two fully independent 10/100 ports for multi-port applications.

The DP83849ID provides optimum flexibility in MPU selection by supporting both MII and RMII interfaces. The device also provides flexibility by supporting both copper and fiber media.

In addition this device includes a powerful new diagnostics tool to ensure initial network operation and maintenance. In addition to the TDR scheme, commonly used for detecting faults during installation, NATIONAL's innovative cable diagnostics provides for real time continuous monitoring of the link quality. This allows the system designer to implement a fault prediction mechanism to detect and warn of changing or deteriorating link conditions.

With the DP83849ID, National Semiconductor continues to build on its Ethernet expertise and leadership position by providing a powerful combination of features and flexibility, easing Ethernet implementation for the system designer.

filter

Buscar otro/a Capa física (PHY) Ethernet

Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new

Comparar alternativas

Misma funcionalidad con diferente configuración de pines que el dispositivo comparado

DP83849IF

ACTIVO

Transceptor PHY Ethernet de 10/100 Mbps de doble puerto y temperatura industrial con soporte de fibr This product includes dual 10/100M ports with fiber and flex port and operates over an industrial temperature range of -40°C to 85°C

DP83849I

ACTIVO

Transceptor PHY Ethernet de 10/100 Mbps de doble puerto y temperatura industrial con conmutador d This product includes dual 10/100M ports and operates over an industrial temperature range of -40°C to 85°C

DP83849C

ACTIVO

Transceptor PHY Ethernet de 10/100 Mbps de doble puerto y temperatura comercial This product includes dual 10/100M ports and operates over a commercial temperature range of 0°C to 70°C

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.

Ver todo 11

Documentación principal	Tipo	Título	Opciones de formato	Fecha
*	Hoja de datos	PHYTER DUAL Ind Temp w/Fiber Support Dual Port 10/100 Mb/s Ethernet PHY X-ceiver datasheet (Rev. E)		27/05/2008
	Nota sobre la aplicación	How to Pass IEEE Ethernet Compliance Tests	PDF \| HTML	20/09/2021
	Nota sobre la aplicación	Selection and specification of crystals for Texas Instruments ethernet physical		6/02/2019
	Nota sobre la aplicación	AN-1507 DP83848 and DP83849 100Mb Data Latency (Rev. B)		26/04/2013
	Nota sobre la aplicación	AN-1508 DP83849 Cable Diagnostics (Rev. A)		26/04/2013
	Nota sobre la aplicación	AN-1509 PhyterDual Flexible Port Switching (Rev. B)		26/04/2013
	Nota sobre la aplicación	Reducing Radiated Emissions in Ethernet 10/100 LAN Applications (Rev. A)		26/04/2013
	Nota sobre la aplicación	AN-1548 PHYTER 100 Base-TX Reference Clock Jitter Tolerance (Rev. B)		26/04/2013
	Nota sobre la aplicación	AN-1540 Power Measurement of Ethernet Physical Layer Products (Rev. B)		26/04/2013
	Nota sobre la aplicación	AN-1469 PHYTER® Design & Layout Guide (Rev. D)		26/04/2013
	Guía del usuario	DP83849IFVS User's Guide		21/02/2012

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

DP83849IFVS-EVK — Placa de evaluación básica del producto y demostración del cliente con FX DP83849IFVS

This evaluation kit (EVK) is for PHYTER™ ethernet physical layer transceivers with dual industrial temperature with fiber support (FX) and flexible port switching dual port 10/100 Mb/s (backwards compatible to the DP83849IDVS-EVK).

Productos y hardware compatibles

En inventario

Límite:

Inicie sesión para hacer un pedido

lock

Iniciar sesión para ver el inventario

??asset.out-of-stock-ti_es_MX??

No disponible

Controlador o biblioteca

ETHERNET-SW — Controladores y herramientas de PHY Ethernet

Los controladores para transceptores de capa física (PHY) Ethernet de Texas Instruments admiten la comunicación a través de la interfaz de administración en serie (MDC/MDIO) para configurar y leer registros PHY. Puede encontrar controladores Linux y RTOS en nuestro github.

Productos y hardware compatibles

Ver opciones

Soporte de software

USB-2-MDIO — USB-2-MDIO Tool v1.0

La herramienta de software USB-2-MDIO permite a los PHY Ethernet de Texas Instruments acceder a los registros de estado y control de dispositivos MDIO. La herramienta USB-2-MDIO incluye un kit de desarrollo LaunchPad™ para los MCU MSP430™ de TI que está conectado con una interfaz gráfica de (...)

Productos y hardware compatibles

Opciones de descarga

Modelo de simulación