Inicio Interfaz Circuitos integrados Ethernet Capa física (PHY) Ethernet

DP83TG720S-Q1

ACTIVO

PHY Ethernet para automoción con RGMII y SGMII 1000BASE-T1

Detalles del producto

Datarate (Mbps) 1000BASE-T1 Interface type RGMII, SGMII Rating Automotive Number of ports Single Features 25-MHz clock out, Cable diagnostics, IEEE802.3bp & Open Alliance (OA) compliant, Integrated LPF, Wettable flank package I/O supply voltage (typ) (V) 1.8, 2.5, 3.3 Operating temperature range (°C) -40 to 125 Number of LEDs 2 ESD HBM (kV) 8
Datarate (Mbps) 1000BASE-T1 Interface type RGMII, SGMII Rating Automotive Number of ports Single Features 25-MHz clock out, Cable diagnostics, IEEE802.3bp & Open Alliance (OA) compliant, Integrated LPF, Wettable flank package I/O supply voltage (typ) (V) 1.8, 2.5, 3.3 Operating temperature range (°C) -40 to 125 Number of LEDs 2 ESD HBM (kV) 8
VQFN (RHA) 36 36 mm² (6 mm × 6 mm)
  • IEEE802.3bp 1000BASE-T1 compliant
  • Open Alliance TC12 Interoperability and EMC compliant
    • Interoperability tested with OA/IEEE compliant PHYs
    • EMC immunity Class-IV compliant for UTP (unshielded twisted pair)
  • Integrated LPF on MDI pins
  • MAC Interfaces: RGMII and SGMII
  • Supported I/O voltages: 3.3V, 2.5V, and 1.8V
  • Pin compatible with TI’s 100BASE-T1 PHY
    • Single board design for 100BASE-T1 and 1000BASE-T1 with required BOM change
  • Power savings features:
    • Standby and sleep
    • Local and remote wake-up
  • Diagnostic tool kit
    • High accuracy temperature monitor
    • Voltage monitor
    • ESD event monitor
    • Data throughput calculator: inbuilt MAC packet generator, counter and error checker
    • Link quality monitoring
    • Cable open and short fault detection
    • Loopback modes
  • 25MHz clock output source
  • VQFN, wettable flank packaging
  • AEC-Q100 Qualified
    • Inbuilt ESD protection: IEC61000-4-2 ESD: ±8kV contact discharge
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature
  • IEEE802.3bp 1000BASE-T1 compliant
  • Open Alliance TC12 Interoperability and EMC compliant
    • Interoperability tested with OA/IEEE compliant PHYs
    • EMC immunity Class-IV compliant for UTP (unshielded twisted pair)
  • Integrated LPF on MDI pins
  • MAC Interfaces: RGMII and SGMII
  • Supported I/O voltages: 3.3V, 2.5V, and 1.8V
  • Pin compatible with TI’s 100BASE-T1 PHY
    • Single board design for 100BASE-T1 and 1000BASE-T1 with required BOM change
  • Power savings features:
    • Standby and sleep
    • Local and remote wake-up
  • Diagnostic tool kit
    • High accuracy temperature monitor
    • Voltage monitor
    • ESD event monitor
    • Data throughput calculator: inbuilt MAC packet generator, counter and error checker
    • Link quality monitoring
    • Cable open and short fault detection
    • Loopback modes
  • 25MHz clock output source
  • VQFN, wettable flank packaging
  • AEC-Q100 Qualified
    • Inbuilt ESD protection: IEC61000-4-2 ESD: ±8kV contact discharge
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature

The DP83TG720S-Q1 device is an IEEE 802.3bp and Open Alliance compliant automotive Ethernet physical layer transceiver. The device provides all physical layer functions needed to transmit and receive data over unshielded/shielded single twisted-pair cables. The device provides xMII flexibility with support for RGMII and SGMII MAC interfaces.

DP83TG720 is compliant to Open Alliance EMC and interoperable specifications over unshielded twisted cable. DP83TG720 is front print compatible to TI’s 100BASE-T1 PHY enabling design scalability with single board for both speeds. This device offers the Diagnostic Tool Kit, with an extensive list of real-time monitoring tools, debug tools and test modes. Within the tool kit is the first integrated electrostatic discharge (ESD) monitoring tool. The device is capable of counting ESD events on both the xMII and MDI as well as providing real-time monitoring through the use of a programmable interrupt. Additionally, the DP83TG720S-Q1 includes a data generator and checker tool to generate customizable MAC packets and check the errors on incoming packets. This enables system level datapath tests and optimizations without dependency on MAC.

The DP83TG720S-Q1 device is an IEEE 802.3bp and Open Alliance compliant automotive Ethernet physical layer transceiver. The device provides all physical layer functions needed to transmit and receive data over unshielded/shielded single twisted-pair cables. The device provides xMII flexibility with support for RGMII and SGMII MAC interfaces.

DP83TG720 is compliant to Open Alliance EMC and interoperable specifications over unshielded twisted cable. DP83TG720 is front print compatible to TI’s 100BASE-T1 PHY enabling design scalability with single board for both speeds. This device offers the Diagnostic Tool Kit, with an extensive list of real-time monitoring tools, debug tools and test modes. Within the tool kit is the first integrated electrostatic discharge (ESD) monitoring tool. The device is capable of counting ESD events on both the xMII and MDI as well as providing real-time monitoring through the use of a programmable interrupt. Additionally, the DP83TG720S-Q1 includes a data generator and checker tool to generate customizable MAC packets and check the errors on incoming packets. This enables system level datapath tests and optimizations without dependency on MAC.

Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Pin por pin con la misma funcionalidad que el dispositivo comparado
DP83TG720R-Q1 ACTIVO PHY Ethernet para automoción con RGMII 1000BASE-T1 Pin-to-pin device that supports RGMII
Misma funcionalidad con diferente configuración de pines que el dispositivo comparado
DP83TG721S-Q1 ACTIVO PHY Ethernet 1000BASE-T1 automotriz con funciones TC-10, 802.1AS, TSN avanzado y AVB Footprint compatible alternative with TC10 and IEEE 1588v2/802.1AS support
Funcionalidad similar a la del dispositivo comparado
DP83TC812S-Q1 ACTIVO PHY Ethernet 100BASE-T1 automotriz compatible con TC-10 con RGMII y SGMII Similar functionality device in the 100BASE-T1 PHY family with TC-10 support
DP83TC813S-Q1 ACTIVO PHY Ethernet 100BASE-T1 de tamaño reducido y baja potencia para automoción (SGMII) Similar functionality device in the 100BASE-T1 PHY family with a smaller footprint and TC-10 support
DP83TC814S-Q1 ACTIVO PHY Ethernet 100BASE-T1 para automoción de baja potencia sin TC10 (SGMII) Similar functionality device in the 100BASE-T1 PHY family without TC-10 support

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 15
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos DP83TG720 S -Q1 1000BASE-T1 Automotive Ethernet PHY with SGMII and RGMII datasheet (Rev. G) PDF | HTML 29/06/2026
Nota sobre la aplicación SGMII Troubleshooting Guide PDF | HTML 5/11/2024
Información sobre seguridad funcional DP83TG720x-Q1 Functional Safety FIT Rate, FMD and Pin FMA PDF | HTML 31/10/2024
Informe How a Zone Architecture Paves the Way to a Fully Software-Defined Vehicle (Rev. C) PDF | HTML 17/10/2024
Nota sobre la aplicación Basic Ethernet Interface Debug With Linux PDF | HTML 11/10/2024
Nota sobre la aplicación How to Integrate Linux Driver Into Your System PDF | HTML 12/07/2024
Application brief How to Implement Power over Data Lines for Automotive Ethernet PDF | HTML 1/07/2024
Nota sobre la aplicación DP83TG720S-Q1: Configuring for Open Alliance Specification Compliance (Rev. B) PDF | HTML 14/02/2024
Nota sobre la aplicación How and Why to Use Single Twisted-Pair Ethernet (SPE) for Industrial Robotics Environments (Rev. A) PDF | HTML 19/01/2024
Artículo técnico How Ethernet accelerates the move to software-defined vehicles (Rev. A) PDF | HTML 5/01/2024
Nota sobre la aplicación DP83TC81x, DP83TG72x Software Implementation Guide PDF | HTML 13/12/2022
Guía del usuario DP83TG720 Ethernet PHY IBIS Models and Simulation User's Guide PDF | HTML 27/07/2022
Nota sobre la aplicación DP83TC811, DP83TG720 Rollover Document (Rev. A) PDF | HTML 29/12/2020
Nota sobre la aplicación DP83TC811, DP83TC812, DP83TC814, DP83TG720 Hardware Rollover Document PDF | HTML 10/01/2020
Artículo técnico The importance of automotive Ethernet standards PDF | HTML 2/05/2018

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

AWR2544LOPEVM — Módulo de evaluación AWR2544LOP para SoC de automoción de segunda generación, de 76 GHz a 81 GHz, de

La AWR2544LOPEVM es una placa de evaluación fácil de usar para el dispositivo sensor AWR254x mmWave, con conectividad directa al DCA1000EVM. Este kit EVM contiene todo lo necesario para comenzar a desarrollar software para el controlador ARM Cortex-R5F en chip y el acelerador de hardware ( HWA (...)
Guía del usuario: PDF | HTML
Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
Placa de evaluación

DP83TG720-EVM-AM2 — Módulo de evaluación AM2x para placa complementaria de Ethernet PHY para automoción

DP83TG720-EVM-AM2 es una placa complementaria de Ethernet PHY para automoción que se usa con los módulos de evaluación de microcontroladores de alto rendimiento Sitara™ de la serie AM2x. Esta placa complementaria es ideal para la evaluación inicial de Ethernet y la creación de prototipos con EVM (...)

Guía del usuario: PDF | HTML
Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
Placa de evaluación

DP83TG720EVM-MC — Módulo de evaluación DP83TG720 para convertidor de medios de 1 Gbps

La DP83TG720EVM-MC es una placa de evaluación de convertidor de medios diseñada para demostrar el rendimiento y las características únicas del transceptor de capa física Ethernet DP83TG720. DP83867E, un PHY Ethernet estándar, se conecta a DP83TG720R-Q1 a través de RGMII para admitir la conexión con (...)

Guía del usuario: PDF | HTML
Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
Tarjeta secundaria

DP83TG720-IND-SPE-EVM — Tarjeta secundaria DP83TG720

La tarjeta secundaria DP83TG720-IND-SPE es un dispositivo periférico compacto de dos puertos diseñado para integrarse a la perfección con la placa de evaluación AM64x. La compatibilidad del complemento directo del DP83TG720-IND-SPE, diseñada para mejorar el proceso de evaluación, ofrece una (...)

Guía del usuario: PDF | HTML
Productos y hardware compatibles
GUI para el módulo de evaluación (EVM)

DIEP — Debug Interface for Ethernet PHYs (DIEP)

Los controladores para transceptores de capa física (PHY) Ethernet de Texas Instruments admiten la comunicación a través de la interfaz de administración en serie (MDC/MDIO) para configurar y leer registros PHY. Puede encontrar controladores Linux y RTOS en nuestro github.

 

Productos y hardware compatibles
Soporte de software

USB-2-MDIO — USB-2-MDIO Tool v1.0

La herramienta de software USB-2-MDIO permite a los PHY Ethernet de Texas Instruments acceder a los registros de estado y control de dispositivos MDIO.  La herramienta USB-2-MDIO incluye un kit de desarrollo LaunchPad™ para los MCU MSP430™ de TI que está conectado con una interfaz gráfica de (...)

Productos y hardware compatibles
Modelo de simulación

IBIS model for DP83TG720S and DP83TG720R

SNLM243.ZIP (1130 KB) - Modelo IBIS
Productos y hardware compatibles
Herramienta de diseño

DP83TG720-SCHEMATIC-CHECKLIST — DP83TG720 schematic review checklist

DP83TG720 schematic review checklist
Productos y hardware compatibles
Diseño de referencia

TIDA-020060 — Diseño de referencia de líneas de alimentación a través de datos para aplicaciones Ethernet 100/1000

Este diseño de referencia demuestra una implementación de líneas de alimentación a través de datos (PoDL) para casos de uso automotrices. El diseño utiliza un PHY Ethernet (SPE) de par único DP83TG720S-Q1 de 1000 MBit/s con la opción de cambiar al PHY SPE DP83TC812S-Q1 para un funcionamiento a (...)

Productos y hardware compatibles
Diseño de referencia

TIDA-020061 — Diseño de referencia PD de líneas de alimentación a través de datos de grado automotriz para apli

Este diseño de referencia implementa un dispositivo alimentado (PD) para demostrar líneas de alimentación a través de datos (PoDL) en aplicaciones automotrices. El diseño utiliza un PHY Ethernet (SPE) de par único DP83TG720S-Q1 de 1000 MBit/s con la opción de cambiar al PHY SPE DP83TC812S-Q1 para (...)

Productos y hardware compatibles
Diseño de referencia

TIDEP-01022 — Diseño de referencia de compuertas para automoción

Las tendencias automotrices evolucionan rápidamente y, como resultado, se utilizan nuevas arquitecturas de puertas de enlace basadas en zonas y dominios para manejar de manera eficiente la creciente cantidad de datos que entran y se desplazan a través del vehículo y que se envían a la nube. Una (...)

Productos y hardware compatibles
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
VQFN (RHA) 36 Ultra Librarian

Pedidos y calidad

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos