DS90LV031AQML

ACTIVO

Controlador de línea diferencial LVDS de 3 V con CMOS cuádruple

Haga su pedido ahora

Hoja de datos

document-pdfAcrobat DS90LV031AQML 3V LVDS Quad CMOS Differential Line Driver datasheet (Rev. A) (Inglés)

DS90LV031AQML

ACTIVO

Hoja de datos

Haga su pedido ahora

Detalles del producto

Function

Driver

Protocols

LVDS

Number of transmitters

4

Number of receivers

0

Signaling rate (Mbps)

400

Input signal

LVTTL

Output signal

LVDS

Rating

Military

Operating temperature range (°C)

-55 to 125

Function

Driver

Protocols

LVDS

Number of transmitters

4

Number of receivers

0

Signaling rate (Mbps)

400

Input signal

LVTTL

Output signal

LVDS

Rating

Military

Operating temperature range (°C)

-55 to 125

CFP (NAD)

16

62.9285 mm² (— mm × — mm)

High impedance LVDS outputs with power-off
Low differential skew
Low propagation delay
3.3V power supply design
±350 mV differential signaling
Low power dissipation
Interoperable with existing 5V LVDS devices
Compatible with IEEE 1596.3 SCI LVDS standard
Compatible with proposed TIA/EIA-644 LVDS standard
Pin compatible with DS26C31
Typical Rise/Fall times of 800pS.
Typical Tri-State Enable/Disable delays of less than 5nS.

All trademarks are the property of their respective owners. TRI-STATE is a trademark of Texas Instruments.

High impedance LVDS outputs with power-off
Low differential skew
Low propagation delay
3.3V power supply design
±350 mV differential signaling
Low power dissipation
Interoperable with existing 5V LVDS devices
Compatible with IEEE 1596.3 SCI LVDS standard
Compatible with proposed TIA/EIA-644 LVDS standard
Pin compatible with DS26C31
Typical Rise/Fall times of 800pS.
Typical Tri-State Enable/Disable delays of less than 5nS.

All trademarks are the property of their respective owners. TRI-STATE is a trademark of Texas Instruments.

The DS90LV031A is a quad CMOS differential line driver designed for applications requiring ultra low power dissipation and high data rates. The device is designed to support data rates in excess of 400 Mbps (200 MHz) utilizing Low Voltage Differential Signaling (LVDS) technology.

The DS90LV031A accepts low voltage TTL/CMOS input levels and translates them to low voltage (350 mV) differential output signals. In addition the driver supports a TRI-STATE function that may be used to disable the output stage, disabling the load current, and thus dropping the device to an ultra low idle power state of 13 mW typical.

The EN and EN* inputs allow active Low or active High control of the TRI-STATE outputs. The enables are common to all four drivers. The DS90LV031A and companion line receiver (DS90LV032A) provide a new alternative to high power psuedo-ECL devices for high speed point-to-point interface applications.

The DS90LV031A is a quad CMOS differential line driver designed for applications requiring ultra low power dissipation and high data rates. The device is designed to support data rates in excess of 400 Mbps (200 MHz) utilizing Low Voltage Differential Signaling (LVDS) technology.

The DS90LV031A accepts low voltage TTL/CMOS input levels and translates them to low voltage (350 mV) differential output signals. In addition the driver supports a TRI-STATE function that may be used to disable the output stage, disabling the load current, and thus dropping the device to an ultra low idle power state of 13 mW typical.

The EN and EN* inputs allow active Low or active High control of the TRI-STATE outputs. The enables are common to all four drivers. The DS90LV031A and companion line receiver (DS90LV032A) provide a new alternative to high power psuedo-ECL devices for high speed point-to-point interface applications.

filter

Buscar otro/a Circuitos integrados LVDS, M-LVDS y PECL

Descargar Ver vídeo con transcripción Video

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.

Ver todo 2

Documentación principal	Tipo	Título	Opciones de formato	Descargar la versión más reciente en inglés	Fecha
*	Hoja de datos	DS90LV031AQML 3V LVDS Quad CMOS Differential Line Driver datasheet (Rev. A)			17/04/2013
*	SMD	DS90LV031AQML SMD 5962-98651			21/06/2016

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

DS90LV047-48AEVM — Módulo de evaluación DS90LV047-48AEVM

El DS90LV047-48AEVM es un módulo de evaluación (EVM) diseñado para la evaluación funcional y de rendimiento de los dispositivos DS90LV047A, un controlador de línea diferencial CMOS cuádruple LVDS de 3 V, y DS90LV048A, un receptor de línea diferencial CMOS LVDS de 3 V, ambos de Texas Instruments. (...)

Guía del usuario: PDF

Productos y hardware compatibles

En inventario

Límite:

Inicie sesión para hacer un pedido

lock

Iniciar sesión para ver el inventario

??asset.out-of-stock-ti_es_MX??

No disponible

Modelo de simulación