Inicio Interfaz Serializadores-deserializadores de alta velocidad Serializadores-deserializadores FPD-Link

DS90UB971-Q1

ACTIVO

Serializador FPD‑Link IV de 7.55 Gbps con interfaz CSI‑2 para radares, sensores y cámaras de 8 MP y

Detalles del producto

Applications Advanced Driver Assistance Systems (ADAS) Input compatibility MIPI CSI-2 Function Serializer Output compatibility FPD-Link IV LVDS Color depth (bpp) 24 Parallel video bandwidth (per port) (max) (Gbps) 6 Serial video bandwidth (per port) (max) (Gbps) 6 Features Bidirectional, CRC, Flexible GPIOs, I2C Config, Pattern Generation Signal conditioning DC Balance EMI reduction LVDS Diagnostics BIST Rating Automotive Operating temperature range (°C) -40 to 115 TI functional safety category Functional Safety-Compliant
Applications Advanced Driver Assistance Systems (ADAS) Input compatibility MIPI CSI-2 Function Serializer Output compatibility FPD-Link IV LVDS Color depth (bpp) 24 Parallel video bandwidth (per port) (max) (Gbps) 6 Serial video bandwidth (per port) (max) (Gbps) 6 Features Bidirectional, CRC, Flexible GPIOs, I2C Config, Pattern Generation Signal conditioning DC Balance EMI reduction LVDS Diagnostics BIST Rating Automotive Operating temperature range (°C) -40 to 115 TI functional safety category Functional Safety-Compliant
VQFN (RHB) 32 25 mm² (5 mm × 5 mm)
  • AEC-Q100 Qualified for automotive applications:
    • Device temperature: -40 to 115°C ambient operating temperature range specified for electrical performance
  • 7.55Gbps (6Gbps Video Payload) supports high-speed sensors including 8MP+ imagers
  • Power-over-Coax (PoC) compatible transceiver
  • Single MIPI D-PHY port with 4 lanes
    • Compliant to MIPI D-PHY v2.1
    • 1 Clock lane and 1, 2, or 4 configurable data lanes
    • Up to 1.5Gbps/lane, 6Gbps/port
    • Supports polarity pin inversion (p/n)
    • 16 Virtual channels
  • Single port MIPI CSI-2 receiver
    • Compliant to MIPI CSI-2 v2.1
    • Supports multiple data types and multi-exposure
  • Advanced data protection and diagnostics including CRC data protection, sensor data integrity check, I2C write protection, voltage and temperature measurement, programmable alarm and line fault detection
  • Flexible programmable output clock generator
  • Supports single-ended coaxial or Shielded-Twisted-Pair (STP) cable
  • Ultra-low latency bidirectional I2C and GPIO control channel enables ISP control from ECU
  • Single 1.8V power supply
  • Compatible with DS90UB9702-Q1, DS90UB954-Q1, DS90UB936-Q1, DS90UB960-Q1, DS90UB962-Q1 deserializers
  • Pin compatible with DS90UB953-Q1, DS90UB953A-Q1, DS90UB935-Q1, DS90UB951-Q1 serializers
  • Small 5mm × 5mm VQFN package and solution size for compact sensor module designs
  • Functional Safety-Compliant
    • Developed for functional safety applications
    • Documentation available to aid ISO 26262 system design up to ASIL B
  • AEC-Q100 Qualified for automotive applications:
    • Device temperature: -40 to 115°C ambient operating temperature range specified for electrical performance
  • 7.55Gbps (6Gbps Video Payload) supports high-speed sensors including 8MP+ imagers
  • Power-over-Coax (PoC) compatible transceiver
  • Single MIPI D-PHY port with 4 lanes
    • Compliant to MIPI D-PHY v2.1
    • 1 Clock lane and 1, 2, or 4 configurable data lanes
    • Up to 1.5Gbps/lane, 6Gbps/port
    • Supports polarity pin inversion (p/n)
    • 16 Virtual channels
  • Single port MIPI CSI-2 receiver
    • Compliant to MIPI CSI-2 v2.1
    • Supports multiple data types and multi-exposure
  • Advanced data protection and diagnostics including CRC data protection, sensor data integrity check, I2C write protection, voltage and temperature measurement, programmable alarm and line fault detection
  • Flexible programmable output clock generator
  • Supports single-ended coaxial or Shielded-Twisted-Pair (STP) cable
  • Ultra-low latency bidirectional I2C and GPIO control channel enables ISP control from ECU
  • Single 1.8V power supply
  • Compatible with DS90UB9702-Q1, DS90UB954-Q1, DS90UB936-Q1, DS90UB960-Q1, DS90UB962-Q1 deserializers
  • Pin compatible with DS90UB953-Q1, DS90UB953A-Q1, DS90UB935-Q1, DS90UB951-Q1 serializers
  • Small 5mm × 5mm VQFN package and solution size for compact sensor module designs
  • Functional Safety-Compliant
    • Developed for functional safety applications
    • Documentation available to aid ISO 26262 system design up to ASIL B

The DS90UB971-Q1 serializer represents the first generation in FPD-Link IV serializers and is designed to support ultra-high-speed raw data sensors including 8MP+ Imagers, satellite RADAR, LIDAR, and Time-of-Flight (ToF) sensors. The chip delivers an 7.55Gbps forward channel and an ultra-low latency, 47.1875Mbps bidirectional control channel and supports power over a single coax (PoC) or STP cable. The DS90UB971-Q1 features advanced data protection and diagnostic features to support ADAS and automotive functional safety. Together with a companion deserializer, the DS90UB971-Q1 delivers precise multi-camera sensor clock and sensor synchronization.

The DS90UB971-Q1 is fully AEC-Q100 qualified with a wide temperature range of –40°C to 115°C. The serializer comes in a small 5mm × 5mm VQFN package for space-constrained sensor applications.

The DS90UB971-Q1 serializer represents the first generation in FPD-Link IV serializers and is designed to support ultra-high-speed raw data sensors including 8MP+ Imagers, satellite RADAR, LIDAR, and Time-of-Flight (ToF) sensors. The chip delivers an 7.55Gbps forward channel and an ultra-low latency, 47.1875Mbps bidirectional control channel and supports power over a single coax (PoC) or STP cable. The DS90UB971-Q1 features advanced data protection and diagnostic features to support ADAS and automotive functional safety. Together with a companion deserializer, the DS90UB971-Q1 delivers precise multi-camera sensor clock and sensor synchronization.

The DS90UB971-Q1 is fully AEC-Q100 qualified with a wide temperature range of –40°C to 115°C. The serializer comes in a small 5mm × 5mm VQFN package for space-constrained sensor applications.

Descargar Ver vídeo con transcripción Video
Solicitar más información

La hoja de datos completa está disponible. Solicitar ahora

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 4
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos DS90UB971 -Q1 FPD-Link IV 7.55-Gbps Serializer With CSI-2 Interface for 8MP+ Cameras, RADAR & Other Sensors datasheet (Rev. A) PDF | HTML 3/01/2025
Nota sobre la aplicación Remote Wake-up, Sleep, and Surveillance Modes for FPD-Link III and FPD-Link PDF | HTML 22/01/2026
Nota sobre la aplicación Optimizing FPD-Link ADAS Designs for System Level ESD Immunity (Rev. B) PDF | HTML 29/10/2025
Certificado DS90UB971-Q1EVM EU Declaration of Conformity (DoC) 3/09/2020

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

DS90UB971-Q1EVM — Módulo de evaluación DS90UB971-Q1

El módulo de evaluación (EVM) DS90UB971-Q1 es un diseño de placa funcional para evaluar el serializador FPD-Link IV DS90UB971-Q1. El serializador DS90UB971-Q1 representa la primera generación de serializadores FPD-Link IV y está diseñado para admitir sensores de velocidad ultrarrápida, incluidos (...)
Productos y hardware compatibles
Software de aplicación y estructura

ALP — Analog LaunchPad Framework Utility

To get started with Analog LaunchPad (ALP) software: Download and install the ALP Framework Utility. Add new device profiles and example scripts with the ALP-PROFILE-UPDATE tool.
Productos y hardware compatibles
Software de aplicación y estructura

FPD-LINK-EXPLORER-APPSW — FPD-Link Explorer (FLEx)

This is the full release of the FPD-Link Explorer (FLEX) software for TI's FPD4 devices, meant to be used with FPD-Link's devices. This software assists in the initialization, bringup, and programming of FPD4 SerDes devices.
Productos y hardware compatibles
Soporte de software

ALP-PROFILE-UPDATE — Analog LaunchPad Profile Update Software

ALP Profile Update contains latest fixes and updates to ALP profiles. If you are installing for the first time please install ALP Profile Update after installing ALP Framework.
Productos y hardware compatibles
Diseño de referencia

TIDA-020093 — Diseño de ref. de radar de transmisión mmWave de chip único para radares frontales automotrices

Con el aumento de las funciones de conducción autónoma, la industria automotriz mueve su foco al valor del radar y la optimización del rendimiento. Es posible mejorar el rendimiento y el costo del radar con topologías de transmisión de datos de radar sin procesar. Este diseño de referencia presenta (...)

Productos y hardware compatibles
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
VQFN (RHB) 32 Ultra Librarian

Pedidos y calidad

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos