INA237-Q1

ACTIVO

Monitor AEC-Q100 de corriente/tensión/carga de salida I²C de 85 V y 16 bits

Haga su pedido ahora

Hoja de datos

document-pdfAcrobat INA237-Q1 AEC-Q100, 85V, 16 -Bit, Precision Power Monitor With I2C Interface datasheet (Rev. B) (Inglés) PDF | HTML

INA237-Q1

ACTIVO

Hoja de datos

Haga su pedido ahora

Detalles del producto

Common-mode voltage (max) (V)

85

Common-mode voltage (min) (V)

-0.3

Digital interface

I2C, SMBus

Resolution (Bits)

16

Input offset (±) (max) (µV)

50

Input offset drift (±) (max) (µV/°C)

0.02

Input offset drift (±) (typ) (µV/°C)

0.002

Voltage gain (V/V)

1

CMRR (min) (dB)

120

Iq (max) (mA)

1.1

Gain error (%)

0.3

Gain error drift (±) (max) (ppm/°C)

50

Features

Alert Function, Bidirectional, Digital Temp Monitor, I2C, Integrated Power Monitor, Low-side Capable

Number of channels

1

Power measurement accuracy (%)

0.6

TI functional safety category

Functional Safety-Capable

Rating

Automotive

Operating temperature range (°C)

-40 to 125

Common-mode voltage (max) (V)

85

Common-mode voltage (min) (V)

-0.3

Digital interface

I2C, SMBus

Resolution (Bits)

16

Input offset (±) (max) (µV)

50

Input offset drift (±) (max) (µV/°C)

0.02

Input offset drift (±) (typ) (µV/°C)

0.002

Voltage gain (V/V)

1

CMRR (min) (dB)

120

Iq (max) (mA)

1.1

Gain error (%)

0.3

Gain error drift (±) (max) (ppm/°C)

50

Features

Alert Function, Bidirectional, Digital Temp Monitor, I2C, Integrated Power Monitor, Low-side Capable

Number of channels

1

Power measurement accuracy (%)

0.6

TI functional safety category

Functional Safety-Capable

Rating

Automotive

Operating temperature range (°C)

-40 to 125

VSSOP (DGS)

10

14.7 mm² (3 mm × 4.9 mm)

AEC-Q100 qualified for automotive applications:
- Temperature grade 1: –40°C to +125°C, TA
Functional Safety-Capable
- Documentation available to aid functional safety system design
High-resolution, 16-bit delta-sigma ADC
Current monitoring accuracy:
- Offset voltage: ±50µV (maximum)
- Offset drift: ±0.02µV/°C (maximum)
- Gain error: ±0.3% (maximum)
- Gain error drift: ±50ppm/°C (maximum)
- Common mode rejection: 120dB (minimum)
Power monitoring accuracy:
- 1.6% full scale, –40°C to +125°C (maximum)
Fast alert response: 75µs
Wide common-mode range: –0.3V to +85V
Bus voltage sense input: 0V to 85V
Shunt full-scale differential range: ±163.84mV / ±40.96mV
Input bias current: 2.5nA (maximum)
Temperature sensor: ±1°C (maximum at 25°C)
Programmable conversion time and averaging
2.94MHz high-speed I2C interface with 16 pin-selectable addresses
Operates from a 2.7V to 5.5V supply:
- Operational current: 640µA (typical)
- Shutdown current: 5µA (maximum)

AEC-Q100 qualified for automotive applications:
- Temperature grade 1: –40°C to +125°C, TA
Functional Safety-Capable
- Documentation available to aid functional safety system design
High-resolution, 16-bit delta-sigma ADC
Current monitoring accuracy:
- Offset voltage: ±50µV (maximum)
- Offset drift: ±0.02µV/°C (maximum)
- Gain error: ±0.3% (maximum)
- Gain error drift: ±50ppm/°C (maximum)
- Common mode rejection: 120dB (minimum)
Power monitoring accuracy:
- 1.6% full scale, –40°C to +125°C (maximum)
Fast alert response: 75µs
Wide common-mode range: –0.3V to +85V
Bus voltage sense input: 0V to 85V
Shunt full-scale differential range: ±163.84mV / ±40.96mV
Input bias current: 2.5nA (maximum)
Temperature sensor: ±1°C (maximum at 25°C)
Programmable conversion time and averaging
2.94MHz high-speed I2C interface with 16 pin-selectable addresses
Operates from a 2.7V to 5.5V supply:
- Operational current: 640µA (typical)
- Shutdown current: 5µA (maximum)

The INA237-Q1 is an ultra-precise digital power monitor with a 16-bit delta-sigma ADC specifically designed for current-sensing applications. The device can measure a full-scale differential input of ±163.84mV or ±40.96mV across a resistive shunt sense element with common-mode voltage support from –0.3V to +85V.

The INA237-Q1 reports current, bus voltage, temperature, and power, all while performing the needed calculations in the background. The integrated temperature sensor is ±1°C accurate for die temperature measurement and is useful in monitoring the system ambient temperature.

The low offset and gain drift design of the INA237-Q1 allows the device to be used in precise systems that do not undergo multi-temperature calibration during manufacturing. Further, the very low offset voltage and noise allow for use in A to kA sensing applications and provide a wide dynamic range without significant power dissipation losses on the sensing shunt element. The low input bias current of the device permits the use of larger current-sense resistors, thus providing accurate current measurements in the micro-amp range.

The device allows for selectable ADC conversion times from 50µs to 4.12ms as well as sample averaging from 1x to 1024x, which further helps reduce the noise of the measured data.

The INA237-Q1 is an ultra-precise digital power monitor with a 16-bit delta-sigma ADC specifically designed for current-sensing applications. The device can measure a full-scale differential input of ±163.84mV or ±40.96mV across a resistive shunt sense element with common-mode voltage support from –0.3V to +85V.

The INA237-Q1 reports current, bus voltage, temperature, and power, all while performing the needed calculations in the background. The integrated temperature sensor is ±1°C accurate for die temperature measurement and is useful in monitoring the system ambient temperature.

The low offset and gain drift design of the INA237-Q1 allows the device to be used in precise systems that do not undergo multi-temperature calibration during manufacturing. Further, the very low offset voltage and noise allow for use in A to kA sensing applications and provide a wide dynamic range without significant power dissipation losses on the sensing shunt element. The low input bias current of the device permits the use of larger current-sense resistors, thus providing accurate current measurements in the micro-amp range.

The device allows for selectable ADC conversion times from 50µs to 4.12ms as well as sample averaging from 1x to 1024x, which further helps reduce the noise of the measured data.

filter

Buscar otro/a Monitores de potencia digitales

Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new

Comparar alternativas

Reemplazo con funcionalidad mejorada del dispositivo comparado

INA238-Q1

ACTIVO

Monitor AEC-Q100 de corriente/tensión/carga de salida I²C de 85 V, 16 bits y alta precisión The INA238 has the same functionality with improved performance

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.

Ver todo 10

Documentación principal	Tipo	Título	Opciones de formato	Fecha
*	Hoja de datos	INA237-Q1 AEC-Q100, 85V, 16 -Bit, Precision Power Monitor With I2C Interface datasheet (Rev. B)	PDF \| HTML	19/06/2025
	Nota sobre la aplicación	Using a PCB Copper Trace as a Current Sense Shunt Resistor (Rev. A)	PDF \| HTML	27/04/2026
	Nota sobre la aplicación	Risks and Prevention of ESD, EOS, and Latch Up Events for Current Sense Amplifiers	PDF \| HTML	18/11/2024
	Nota sobre la aplicación	Digital Interfaces for Current Sensing Devices (Rev. A)	PDF \| HTML	30/09/2021
	Application brief	Integrating the Current Sensing Signal Path (Rev. B)	PDF \| HTML	29/09/2021
	Application brief	Integrated, Current Sensing Analog-to-Digital Converter (Rev. A)	PDF \| HTML	28/09/2021
	Nota sobre la aplicación	Getting Started with Digital Power Monitors (Rev. A)	PDF \| HTML	2/09/2021
	Application brief	Shunt-Based Current-Sensing Solutions for BMS Applications in HEVs and EVs (Rev. B)	PDF \| HTML	2/02/2021
	Información sobre seguridad funcional	INA2xx-Q1 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA	PDF \| HTML	2/11/2020
	Nota sobre la aplicación	Understanding the I2C Bus	PDF \| HTML	30/06/2015

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

INA228_237_238EVM — Módulo de evaluación INA228, INA237 y INA238

Este módulo de evaluación (EVM) es una plataforma fácil de usar para evaluar las funciones principales y el rendimiento de INA228, INA237 o INA238.

La EVM es compatible con mediciones de corriente de hasta 10 A e incorpora una interfaz gráfica de usuario (GUI) para leer y escribir en los registros (...)

Guía del usuario: PDF | HTML