INA239

ACTIVO

Monitor de corriente/tensión/potencia de salida SPI de 85 V, 16 bits y alta precisión con alerta<

Haga su pedido ahora

Hoja de datos

document-pdfAcrobat INA239 85-V, 16-Bit, High-Precision Power Monitor With SPI Interface datasheet (Rev. A) (Inglés) PDF | HTML

INA239

ACTIVO

Hoja de datos

Haga su pedido ahora

Detalles del producto

Common-mode voltage (max) (V)

85

Common-mode voltage (min) (V)

-0.3

Digital interface

SPI

Resolution (Bits)

16

Input offset (±) (max) (µV)

5

Input offset drift (±) (max) (µV/°C)

0.02

Input offset drift (±) (typ) (µV/°C)

0.002

Voltage gain (V/V)

1

CMRR (min) (dB)

140

Iq (max) (mA)

1.1

Gain error (%)

0.1

Gain error drift (±) (max) (ppm/°C)

25

Features

Alert Function, Bidirectional, Digital Temp Monitor, High precision, Integrated Power Monitor, Low-side Capable, SPI

Number of channels

1

Power measurement accuracy (%)

0.2

Rating

Catalog

Operating temperature range (°C)

-40 to 125

Common-mode voltage (max) (V)

85

Common-mode voltage (min) (V)

-0.3

Digital interface

SPI

Resolution (Bits)

16

Input offset (±) (max) (µV)

5

Input offset drift (±) (max) (µV/°C)

0.02

Input offset drift (±) (typ) (µV/°C)

0.002

Voltage gain (V/V)

1

CMRR (min) (dB)

140

Iq (max) (mA)

1.1

Gain error (%)

0.1

Gain error drift (±) (max) (ppm/°C)

25

Features

Alert Function, Bidirectional, Digital Temp Monitor, High precision, Integrated Power Monitor, Low-side Capable, SPI

Number of channels

1

Power measurement accuracy (%)

0.2

Rating

Catalog

Operating temperature range (°C)

-40 to 125

VSSOP (DGS)

10

14.7 mm² (3 mm × 4.9 mm)

High-resolution, 16-bit delta-sigma ADC
Current monitoring accuracy:
- Offset voltage: ±5 µV (maximum)
- Offset drift: ±0.02 µV/°C (maximum)
- Gain error: ±0.1% (maximum)
- Gain error drift: ±25 ppm/°C (maximum)
- Common mode rejection: 140 dB (minimum)
Power monitoring accuracy:
- 0.7% full scale, –40°C to +125°C (maximum)
Fast alert response: 75 µs
Wide common-mode range: –0.3 V to +85 V
Bus voltage sense input: 0 V to 85 V
Shunt full-scale differential range: ±163.84 mV / ±40.96 mV
Input bias current: 2.5 nA (maximum)
Temperature sensor: ±1°C (maximum at 25°C)
Programmable conversion time and averaging
10-MHz SPI communication interface
Operates from a 2.7-V to 5.5-V supply:
- Operational current: 640 µA (typical)
- Shutdown current: 5 µA (maximum)

High-resolution, 16-bit delta-sigma ADC
Current monitoring accuracy:
- Offset voltage: ±5 µV (maximum)
- Offset drift: ±0.02 µV/°C (maximum)
- Gain error: ±0.1% (maximum)
- Gain error drift: ±25 ppm/°C (maximum)
- Common mode rejection: 140 dB (minimum)
Power monitoring accuracy:
- 0.7% full scale, –40°C to +125°C (maximum)
Fast alert response: 75 µs
Wide common-mode range: –0.3 V to +85 V
Bus voltage sense input: 0 V to 85 V
Shunt full-scale differential range: ±163.84 mV / ±40.96 mV
Input bias current: 2.5 nA (maximum)
Temperature sensor: ±1°C (maximum at 25°C)
Programmable conversion time and averaging
10-MHz SPI communication interface
Operates from a 2.7-V to 5.5-V supply:
- Operational current: 640 µA (typical)
- Shutdown current: 5 µA (maximum)

The INA239 is an ultra-precise digital power monitor with a 16-bit delta-sigma ADC specifically designed for current-sensing applications. The device can measure a full-scale differential input of ±163.84 mV or ±40.96 mV across a resistive shunt sense element with common-mode voltage support from –0.3 V to +85 V.

The INA239 reports current, bus voltage, temperature, and power, all while performing the needed calculations in the background. The integrated temperature sensor is ±1°C accurate for die temperature measurement and is useful in monitoring the system ambient temperature.

The low offset and gain drift design of the INA239 allows the device to be used in precise systems that do not undergo multi-temperature calibration during manufacturing. Further, the very low offset voltage and noise allow for use in A to kA sensing applications and provide a wide dynamic range without significant power dissipation losses on the sensing shunt element. The low input bias current of the device permits the use of larger current-sense resistors, thus providing accurate current measurements in the micro-amp range.

The device allows for selectable ADC conversion times from 50 µs to 4.12 ms as well as sample averaging from 1x to 1024x, which further helps reduce the noise of the measured data.

The INA239 is an ultra-precise digital power monitor with a 16-bit delta-sigma ADC specifically designed for current-sensing applications. The device can measure a full-scale differential input of ±163.84 mV or ±40.96 mV across a resistive shunt sense element with common-mode voltage support from –0.3 V to +85 V.

The INA239 reports current, bus voltage, temperature, and power, all while performing the needed calculations in the background. The integrated temperature sensor is ±1°C accurate for die temperature measurement and is useful in monitoring the system ambient temperature.

The low offset and gain drift design of the INA239 allows the device to be used in precise systems that do not undergo multi-temperature calibration during manufacturing. Further, the very low offset voltage and noise allow for use in A to kA sensing applications and provide a wide dynamic range without significant power dissipation losses on the sensing shunt element. The low input bias current of the device permits the use of larger current-sense resistors, thus providing accurate current measurements in the micro-amp range.

The device allows for selectable ADC conversion times from 50 µs to 4.12 ms as well as sample averaging from 1x to 1024x, which further helps reduce the noise of the measured data.

filter

Buscar otro/a Monitores de potencia digitales

Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new

Comparar alternativas

Reemplazo con funcionalidad mejorada del dispositivo comparado

INA229

ACTIVO

Monitor de corriente/tensión/potencia/energía/carga de salida SPI ultrapreciso de 85 V y 20 bits Pin-to-pin with increased 20-bit performance

Misma funcionalidad con diferente configuración de pines que el dispositivo comparado

INA238

ACTIVO

Monitor de corriente/tensión/potencia de salida I2C de 85 V, 16 bits y alta precisión con alerta< Similar 16-bit performance with I2C interface.

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.

Ver todo 8

Documentación principal	Tipo	Título	Opciones de formato	Fecha
*	Hoja de datos	INA239 85-V, 16-Bit, High-Precision Power Monitor With SPI Interface datasheet (Rev. A)	PDF \| HTML	11/05/2022
	Nota sobre la aplicación	Using a PCB Copper Trace as a Current Sense Shunt Resistor (Rev. A)	PDF \| HTML	27/04/2026
	Nota sobre la aplicación	Risks and Prevention of ESD, EOS, and Latch Up Events for Current Sense Amplifiers	PDF \| HTML	18/11/2024
	Nota sobre la aplicación	Digital Interfaces for Current Sensing Devices (Rev. A)	PDF \| HTML	30/09/2021
	Application brief	Integrating the Current Sensing Signal Path (Rev. B)	PDF \| HTML	29/09/2021
	Application brief	Integrated, Current Sensing Analog-to-Digital Converter (Rev. A)	PDF \| HTML	28/09/2021
	Nota sobre la aplicación	Getting Started with Digital Power Monitors (Rev. A)	PDF \| HTML	2/09/2021
	Certificado	INA239EVM EU RoHS Declaration of Conformity (DoC) (Rev. A)		16/12/2020

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

INA229_239EVM — Módulo de evaluación INA229 y INA239

Este módulo de evaluación (EVM) es una plataforma fácil de usar para evaluar las funciones principales y el rendimiento de INA229 o INA239.

La EVM es compatible con mediciones de corriente de hasta 10 A e incorpora una interfaz gráfica de usuario (GUI) para leer y escribir en los registros del (...)

Guía del usuario: PDF | HTML