Inicio Amplificadores Amplificadores de detección de corriente Monitores de potencia digitales
Inicio
Amplificadores
Amplificadores de detección de corriente
Monitores de potencia digitales

INA4230

ACTIVO

Monit. de corr., tensión, pot. y energ. de alta prec., 4 canales y 16 bits con cap. para control. E3

Haga su pedido ahora
Hoja de datos

INA4230

ACTIVO
Haga su pedido ahora

Detalles del producto

Common-mode voltage (max) (V) 48 Common-mode voltage (min) (V) -0.3 Digital interface I2C, SMBus Resolution (Bits) 16 Input offset (±) (max) (µV) 75 Input offset drift (±) (max) (µV/°C) 0.5 Voltage gain (V/V) 1 CMRR (min) (dB) 110 Iq (max) (mA) 0.5 Gain error (%) 0.75 Gain error drift (±) (max) (ppm/°C) 50 Features Alert Function, Bidirectional, Integrated Power Accumulator, Intergrated Power Monitor, Low-side Capable Number of channels 4 Power measurement accuracy (%) 1.5 Rating Catalog Operating temperature range (°C) -40 to 125
Common-mode voltage (max) (V) 48 Common-mode voltage (min) (V) -0.3 Digital interface I2C, SMBus Resolution (Bits) 16 Input offset (±) (max) (µV) 75 Input offset drift (±) (max) (µV/°C) 0.5 Voltage gain (V/V) 1 CMRR (min) (dB) 110 Iq (max) (mA) 0.5 Gain error (%) 0.75 Gain error drift (±) (max) (ppm/°C) 50 Features Alert Function, Bidirectional, Integrated Power Accumulator, Intergrated Power Monitor, Low-side Capable Number of channels 4 Power measurement accuracy (%) 1.5 Rating Catalog Operating temperature range (°C) -40 to 125
DSBGA (YBJ) 16 2.56 mm² (1.6 mm × 1.6 mm)
  • High-side or low-side current sensing
  • Operates from a 1.7V to 5.5V power supply
  • Reports current, voltage, power, and energy
  • Programmable full scale range: 20mV / 80mV
  • Input common mode range: –0.3V to 48V
  • Current monitoring accuracy:
    • 16-bit ADC resolution
    • 0.75% gain error (maximum)
    • 75µV offset (maximum)
  • Power monitoring accuracy:
    • 1.5% full scale (maximum)
  • Energy monitoring accuracy:
    • 2% full scale (maximum)
  • Low input bias currents: 5nA (maximum)
  • Low disable current: 1µA (maximum)
  • Configurable averaging options
  • Alert limits for over and under current events
  • 1.2V compliant I2C, SMBus interface
  • 16-pin selectable addresses
  • DSBGA-16 Package (1.5mm × 1.5mm)
  • High-side or low-side current sensing
  • Operates from a 1.7V to 5.5V power supply
  • Reports current, voltage, power, and energy
  • Programmable full scale range: 20mV / 80mV
  • Input common mode range: –0.3V to 48V
  • Current monitoring accuracy:
    • 16-bit ADC resolution
    • 0.75% gain error (maximum)
    • 75µV offset (maximum)
  • Power monitoring accuracy:
    • 1.5% full scale (maximum)
  • Energy monitoring accuracy:
    • 2% full scale (maximum)
  • Low input bias currents: 5nA (maximum)
  • Low disable current: 1µA (maximum)
  • Configurable averaging options
  • Alert limits for over and under current events
  • 1.2V compliant I2C, SMBus interface
  • 16-pin selectable addresses
  • DSBGA-16 Package (1.5mm × 1.5mm)

The INA4230 device is a quad channel 16-bit digital current monitor with an I2C/SMBus-compatible interface that is compliant with digital bus voltages from 1.2V to 5V. The device monitors the voltage across an external sense resistor and reports values for shunt voltage, bus voltage, current, power, and energy for each channel.

The INA4230 features programmable ADC conversion times and averaging that is common for all channels. Each channel has a programmable calibration value with an internal multiplier that enables direct readouts of current in amperes, power in watts, and energy in joules. Each channel monitors the bus voltage present on the IN– pin and can alert on overcurrent and undercurrent conditions, as well as on overvoltage and undervoltage conditions.High input impedance while in current measurement mode allows use of larger current sense resistors needed to measure small value system currents.

The INA4230 senses current on common-mode bus voltages that can vary from –0.3V to 48V, independent of the supply voltage. The device operates from a single 1.7V to 5.5V supply, drawing a typical supply current of 400µA in normal operation. The device can be placed in a low-power standby mode where the typical operating current is 2.5µA and can be fully disabled using the enable pin to achieve an supply current less than 1µA. The device is specified over the operating temperature range between –40°C and 125°C and features up to 16 programmable addresses.

The INA4230 device is a quad channel 16-bit digital current monitor with an I2C/SMBus-compatible interface that is compliant with digital bus voltages from 1.2V to 5V. The device monitors the voltage across an external sense resistor and reports values for shunt voltage, bus voltage, current, power, and energy for each channel.

The INA4230 features programmable ADC conversion times and averaging that is common for all channels. Each channel has a programmable calibration value with an internal multiplier that enables direct readouts of current in amperes, power in watts, and energy in joules. Each channel monitors the bus voltage present on the IN– pin and can alert on overcurrent and undercurrent conditions, as well as on overvoltage and undervoltage conditions.High input impedance while in current measurement mode allows use of larger current sense resistors needed to measure small value system currents.

The INA4230 senses current on common-mode bus voltages that can vary from –0.3V to 48V, independent of the supply voltage. The device operates from a single 1.7V to 5.5V supply, drawing a typical supply current of 400µA in normal operation. The device can be placed in a low-power standby mode where the typical operating current is 2.5µA and can be fully disabled using the enable pin to achieve an supply current less than 1µA. The device is specified over the operating temperature range between –40°C and 125°C and features up to 16 programmable addresses.
filter Buscar otro/a Monitores de potencia digitales
Descargar Ver vídeo con transcripción Video

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 2
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos INA4230 48V, Quad Channel, 16-Bit, Current, Voltage, Power, and Energy Monitor With an I2C Interface datasheet 25/06/2024
Nota sobre la aplicación Risks and Prevention of ESD, EOS, and Latch Up Events for Current Sense Amplifiers PDF | HTML 18/11/2024

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

INA423XEVM — Módulo de evaluación INA4230 e INA4235

El módulo de evaluación (EVM) INA423X es una plataforma para evaluar las funciones principales y el rendimiento de INA4230 e INA4235. El EVM admite mediciones de corriente de hasta 10 A por canal e incluye una GUI para leer y escribir registros de dispositivos.

Guía del usuario: PDF | HTML
Productos y hardware compatibles
IDE, configuración, compilador o depurador

ASC-STUDIO-INA4230 — ASC Studio (SysConfig) for configuring all aspects of the INA4230 current sensor

SysConfig can be used to help simplify configuration challenges and accelerate software development with the INA4230 current sensor.
Productos y hardware compatibles
Controlador o biblioteca

INA-WINDOWS-11-E3-DRIVER — Controlador de motor de estimación de energía (E3) para Windows 11

Energy Estimation Engine (E3) is a software framework that tracks and attributes power consumption to specific hardware components and software processes. It leverages the EMI (Energy Metering Interface) to report the energy consumption of various power rails.
Productos y hardware compatibles
Controlador o biblioteca

INA423X-LINUX-DRIVER — Controlador Linux para los modelos INA4235 e INA4230.

Productos y hardware compatibles
Soporte de software

E3-CONSOLE-APPLICATION-SW — Energy Estimation Engine (E3) driver evaluation software

The E3 Console application uses the Energy Meter Interface (EMI) IOCTLs defined by Microsoft to extract power rail data and measurement. This application can be used to evaluate TI's E3 drivers.
Productos y hardware compatibles
Herramienta de simulación

PSPICE-FOR-TI — PSpice® para herramienta de diseño y simulación de TI

PSpice® para TI es un entorno de diseño y simulación que ayuda a evaluar la funcionalidad de los circuitos analógicos. Esta completa suite de diseño y simulación utiliza un motor de análisis analógico de Cadence®. Disponible sin ningún costo, PSpice para TI incluye una de las bibliotecas de modelos (...)
Productos y hardware compatibles
Herramienta de cálculo

ANALOG-ENGINEER-CALC — PC software analog engineer's calculator

La calculadora del ingeniero analógico está diseñada para acelerar muchos de los cálculos repetitivos que los ingenieros de diseño de circuitos analógicos utilizan de forma habitual. Esta herramienta para PC proporciona una interfaz gráfica con una lista de varios cálculos comunes que van desde el (...)

Productos y hardware compatibles
Herramienta de cálculo

CS-AMPLIFIER-ERROR-TOOL — Current Sense Amplifier Comparison and Error Tool

Esta calculadora Excel proporciona una comparación entre dos y cinco de nuestros amplificadores de detección de corriente estándar y ofrece un gráfico que contiene los parámetros básicos de cada dispositivo. Esta calculadora también toma las entradas de la condición del sistema de los usuarios, (...)
Productos y hardware compatibles
Herramienta de cálculo

SBOR021 — Power Monitor Tool

Productos y hardware compatibles
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
DSBGA (YBJ) 16 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos