Inicio Amplificadores Amplificadores de instrumentación
Inicio
Amplificadores
Amplificadores de instrumentación

INA823

ACTIVO

Amplificador de instrumentación con precisión (100 µV), baja potencia (250 µA) y alimentación amplia

Haga su pedido ahora
Hoja de datos

INA823

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Number of channels 1 Vs (max) (V) 36 Vs (min) (V) 2.7 Input offset (±) (max) (µV) 100 Voltage gain (min) (V/V) 1 Voltage gain (max) (V/V) 10000 Noise at 1 kHz (typ) (nV√Hz) 21 Features Cost Optimized, Low power, Overvoltage protection CMRR (min) (dB) 120 Input offset drift (±) (max) (µV/°C) 1.2 Input bias current (±) (max) (nA) 8 Iq (typ) (mA) 0.18 Bandwidth at min gain (typ) (MHz) 1.9 Gain error (±) (max) (%) 0.2 Operating temperature range (°C) -40 to 125 Rating Catalog Type Resistor Gain nonlinearity (±) (max) (%) 0.001 Output swing headroom (to negative supply) (typ) (V) 0.15 Output swing headroom (to positive supply) (typ) (V) -0.15 Input common mode headroom (to negative supply) (typ) (V) -0.15 Input common mode headroom (to positive supply) (typ) (V) -1 Noise at 0.1 Hz to 10 Hz (typ) (µVPP) 0.4
Number of channels 1 Vs (max) (V) 36 Vs (min) (V) 2.7 Input offset (±) (max) (µV) 100 Voltage gain (min) (V/V) 1 Voltage gain (max) (V/V) 10000 Noise at 1 kHz (typ) (nV√Hz) 21 Features Cost Optimized, Low power, Overvoltage protection CMRR (min) (dB) 120 Input offset drift (±) (max) (µV/°C) 1.2 Input bias current (±) (max) (nA) 8 Iq (typ) (mA) 0.18 Bandwidth at min gain (typ) (MHz) 1.9 Gain error (±) (max) (%) 0.2 Operating temperature range (°C) -40 to 125 Rating Catalog Type Resistor Gain nonlinearity (±) (max) (%) 0.001 Output swing headroom (to negative supply) (typ) (V) 0.15 Output swing headroom (to positive supply) (typ) (V) -0.15 Input common mode headroom (to negative supply) (typ) (V) -0.15 Input common mode headroom (to positive supply) (typ) (V) -1 Noise at 0.1 Hz to 10 Hz (typ) (µVPP) 0.4
SOIC (D) 8 29.4 mm² 4.9 x 6 VSSOP (DGK) 8 14.7 mm² 3 x 4.9
  • Input overvoltage protection up to ±60 V
  • Input voltage extends 150 mV below negative supply
  • Low power supply current: 180 µA (typ)
  • Precision performance:
    • Low offset voltage: 20 µV (typ), 100 µV (max)
    • Low input bias current: 8nA (max)
    • Common-mode rejection:
      • 84 dB, G = 1 (min)
      • 104 dB, G = 10 (min)
      • 120 dB, G ≥ 100 (min)
    • Power supply rejection: 100 dB, G = 1 (min)
  • Input voltage noise: 21 nV/√Hz
  • Bandwidth: 1.9 MHz (G = 1), 60 kHz (G = 100)
  • Stable with 1-nF capacitive loads
  • Supply range:
    • Single-supply: 2.7 V to 36 V
    • Dual-supply: ±1.35 V to ±18 V
  • Specified temperature range: –40°C to +125°C
  • Packages: 8-pin SOIC and 8-pin VSSOP
  • Input overvoltage protection up to ±60 V
  • Input voltage extends 150 mV below negative supply
  • Low power supply current: 180 µA (typ)
  • Precision performance:
    • Low offset voltage: 20 µV (typ), 100 µV (max)
    • Low input bias current: 8nA (max)
    • Common-mode rejection:
      • 84 dB, G = 1 (min)
      • 104 dB, G = 10 (min)
      • 120 dB, G ≥ 100 (min)
    • Power supply rejection: 100 dB, G = 1 (min)
  • Input voltage noise: 21 nV/√Hz
  • Bandwidth: 1.9 MHz (G = 1), 60 kHz (G = 100)
  • Stable with 1-nF capacitive loads
  • Supply range:
    • Single-supply: 2.7 V to 36 V
    • Dual-supply: ±1.35 V to ±18 V
  • Specified temperature range: –40°C to +125°C
  • Packages: 8-pin SOIC and 8-pin VSSOP

The INA823 is an integrated instrumentation amplifier that offers low power consumption and operates over a wide, single-supply or dual-supply range. A single external resistor sets any gain from 1 to 10,000. The device provides low input offset voltage, low offset voltage drift, low input bias current, and low current noise while remaining cost-effective. Additional circuitry protects the inputs against overvoltage up to ±60 V.

The INA823 is optimized to provide a high common-mode rejection ratio. At G = 1, the common-mode rejection ratio exceeds 84 dB across the full input common-mode range. The INA823 has a wide common-mode voltage range as low as 150-mV below negative supply. The device is designed for low-voltage operation from a 2.7-V single supply, and dual supplies up to ±18 V. The low power and single supply operation enable hand-held, battery-operated systems.

The INA823 is an integrated instrumentation amplifier that offers low power consumption and operates over a wide, single-supply or dual-supply range. A single external resistor sets any gain from 1 to 10,000. The device provides low input offset voltage, low offset voltage drift, low input bias current, and low current noise while remaining cost-effective. Additional circuitry protects the inputs against overvoltage up to ±60 V.

The INA823 is optimized to provide a high common-mode rejection ratio. At G = 1, the common-mode rejection ratio exceeds 84 dB across the full input common-mode range. The INA823 has a wide common-mode voltage range as low as 150-mV below negative supply. The device is designed for low-voltage operation from a 2.7-V single supply, and dual supplies up to ±18 V. The low power and single supply operation enable hand-held, battery-operated systems.
filter Buscar otro/a Amplificadores de instrumentación
Descargar Ver vídeo con transcripción Video

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 8
Documentación principal Tipo Título Opciones de formato Fecha
* Data sheet INA823 Precision, Low-Power, Wide-Supply (2.7-V to 36-V) Instrumentation Amplifier datasheet (Rev. B) PDF | HTML 23 nov 2021
Application note High Accuracy Wheatstone Bridge Amplifier Circuit to 4-20-mA Current Loop Transm PDF | HTML 28 sep 2023
Application brief How to Select Amplifiers for Pressure Transmitter Applications (Rev. B) PDF | HTML 14 feb 2023
Product overview Bridge Sensor Solution (Rev. A) PDF | HTML 27 ene 2023
Product overview PLC Analog Input Front-End Architectures PDF | HTML 31 jul 2022
Application note Cost-Optimized, High-Performance Front-End Design for Analog Input Modules PDF | HTML 22 jun 2022
Application note Amplifier Input Common-Mode and Output-Swing Limitations PDF | HTML 14 ene 2022
Application note Importance of Input Bias Current Return Paths in Instrumentation Amplifier Apps PDF | HTML 27 jul 2021

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

INAEVM — Módulo de evaluación de amplificador de instrumentación universal

The universal INAEVM (Instrumentation Amplifier Evaluation Module) is available in two package options that simplify prototyping precision instrumentation amplifiers in either the SO-8 (D) package or the MSOP-8(DGK) package with the pinout shown.  See the chart in the user guide (...)

Guía del usuario: PDF | HTML
View Options
Modelo de simulación

INA823 PSpice Model (Rev. B)

SBOMBU8B.ZIP (26 KB) - PSpice Model
Descargar
Modelo de simulación

INA823 TINA-TI Reference Design (Rev. B)

SBOMBU9B.TSC (504 KB) - TINA-TI Reference Design
Descargar
Modelo de simulación

INA823 TINA-TI Spice Model (Rev. B)

SBOMBU7B.ZIP (16 KB) - TINA-TI Spice Model
Descargar
Herramienta de cálculo

ANALOG-ENGINEER-CALC — PC software analog engineer's calculator

The analog engineer’s calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting operational-amplifier (...)

Productos y hardware compatibles

Productos y hardware compatibles
Iniciar Descargar
Herramienta de simulación

PSPICE-FOR-TI — PSpice® para herramienta de diseño y simulación de TI

PSpice® para TI es un entorno de diseño y simulación que ayuda a evaluar la funcionalidad de los circuitos analógicos. Esta completa suite de diseño y simulación utiliza un motor de análisis analógico de Cadence®. Disponible sin ningún costo, PSpice para TI incluye una de las bibliotecas de modelos (...)
Solicitar
Herramienta de simulación

TINA-TI — Programa de simulación analógica basado en SPICE

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
Guía del usuario: PDF
View Options
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
SOIC (D) 8 Ultra Librarian
VSSOP (DGK) 8 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL)/reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos