Inicio Amplificadores Amplificadores de detección de corriente Amplificadores analógicos de detección de corriente

INA951-SP

ACTIVO

Detalles del producto

Rating Space Operating temperature range (°C) to
Rating Space Operating temperature range (°C) to
SOT-23 (DBV) 5 8.12 mm² (2.9 mm × 2.8 mm)
  • QML Class-P Radiation Hardness Assured (QMLP-RHA) grade
  • Radiation - Total Ionizing Dose (TID):
    • TID performance assurance up to 50krad(Si)
    • Radiation Lot Acceptance Testing (RLAT) for every wafer lot up to 50krad(Si)
  • Radiation - Single-Event Effects (SEE):
    • Single Event Latch-Up (SEL) immune up to 75MeV-cm2 /mg at 125°C
    • Single Event Transient (SET) characterized up to LET = 75MeV-cm2 /mg
  • Supports defense, aerospace, and medical applications
    • Operating temperature from –55°C to +125°C
    • Controlled baseline
    • Au bondwire and NiPdAu lead finish
    • Outgassing test performed per ASTM E595
    • One fabrication, assembly, and test site
    • Extended product life cycle
    • Product traceability
  • Wide common-mode voltage:
    • Operational voltage: −4V to +80V
    • Survival voltage: −20V to +85V
  • Excellent CMRR:
    • 160dB DC-CMRR
    • 85dB AC-CMRR at 50kHz
  • Accuracy:
    • Gain:
      • Gain error: ±0.15% (maximum)
      • Gain drift: ±10ppm/ °C (maximum)
    • Offset:
      • Offset voltage: ±30µV (typical)
      • Offset drift: ±0.05µV/ °C (typical)
  • Available gain:
    • INA951-SPA1, : 20V/V
  • High bandwidth: 1.3MHz
  • Slew rate: 2.5V/µs
  • Quiescent current: 1.5mA
  • QML Class-P Radiation Hardness Assured (QMLP-RHA) grade
  • Radiation - Total Ionizing Dose (TID):
    • TID performance assurance up to 50krad(Si)
    • Radiation Lot Acceptance Testing (RLAT) for every wafer lot up to 50krad(Si)
  • Radiation - Single-Event Effects (SEE):
    • Single Event Latch-Up (SEL) immune up to 75MeV-cm2 /mg at 125°C
    • Single Event Transient (SET) characterized up to LET = 75MeV-cm2 /mg
  • Supports defense, aerospace, and medical applications
    • Operating temperature from –55°C to +125°C
    • Controlled baseline
    • Au bondwire and NiPdAu lead finish
    • Outgassing test performed per ASTM E595
    • One fabrication, assembly, and test site
    • Extended product life cycle
    • Product traceability
  • Wide common-mode voltage:
    • Operational voltage: −4V to +80V
    • Survival voltage: −20V to +85V
  • Excellent CMRR:
    • 160dB DC-CMRR
    • 85dB AC-CMRR at 50kHz
  • Accuracy:
    • Gain:
      • Gain error: ±0.15% (maximum)
      • Gain drift: ±10ppm/ °C (maximum)
    • Offset:
      • Offset voltage: ±30µV (typical)
      • Offset drift: ±0.05µV/ °C (typical)
  • Available gain:
    • INA951-SPA1, : 20V/V
  • High bandwidth: 1.3MHz
  • Slew rate: 2.5V/µs
  • Quiescent current: 1.5mA

The INA951-SP is a current sense amplifier that can measure voltage drops across shunt resistors over a wide common-mode range from –4V to 80V. The negative common-mode voltage allows the device to operate below ground, thus accommodating precise measurement of recirculating currents in half-bridge applications. The combination of a low offset voltage, small gain error and high DC CMRR enables highly accurate current measurement. The INA951-SP is not only designed for DC current measurement, but also for high-speed applications (for example, fast over-current protection) with a high bandwidth of 1.3MHz and an 85dB AC CMRR (at 50kHz).

The INA951-SP operates from a single 2.7V to 5.5V supply, drawing 1.5mA of supply current. The INA951-SP is available with a gain option of 20V/V.

The INA951-SP is specified over an operating temperature range of −55°C to +125°C and is offered in a space-saving SOT-23 package.

The INA951-SP is a current sense amplifier that can measure voltage drops across shunt resistors over a wide common-mode range from –4V to 80V. The negative common-mode voltage allows the device to operate below ground, thus accommodating precise measurement of recirculating currents in half-bridge applications. The combination of a low offset voltage, small gain error and high DC CMRR enables highly accurate current measurement. The INA951-SP is not only designed for DC current measurement, but also for high-speed applications (for example, fast over-current protection) with a high bandwidth of 1.3MHz and an 85dB AC CMRR (at 50kHz).

The INA951-SP operates from a single 2.7V to 5.5V supply, drawing 1.5mA of supply current. The INA951-SP is available with a gain option of 20V/V.

The INA951-SP is specified over an operating temperature range of −55°C to +125°C and is offered in a space-saving SOT-23 package.

Descargar Ver vídeo con transcripción Video

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Herramienta de cálculo

ANALOG-ENGINEER-CALC — PC software analog engineer's calculator

La calculadora del ingeniero analógico está diseñada para acelerar muchos de los cálculos repetitivos que los ingenieros de diseño de circuitos analógicos utilizan de forma habitual. Esta herramienta para PC proporciona una interfaz gráfica con una lista de varios cálculos comunes que van desde el (...)

Productos y hardware compatibles
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
SOT-23 (DBV) 5 Ultra Librarian

Pedidos y calidad

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos