LM158QML

ACTIVO

Amplificador operacional doble de calidad militar de 32 V y 700 kHz

Haga su pedido ahora

Hoja de datos

document-pdfAcrobat LM158QML Low Power Dual Operational Amplifiers datasheet (Rev. F) (Inglés)

LM158QML

ACTIVO

Hoja de datos

Haga su pedido ahora

Detalles del producto

Number of channels

2

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

32

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

3

Rail-to-rail

In to V-

GBW (typ) (MHz)

0.7

Slew rate (typ) (V/µs)

0.3

Vos (offset voltage at 25°C) (max) (mV)

2

Iq per channel (typ) (mA)

0.35

Vn at 1 kHz (typ) (nV√Hz)

40

Rating

Military

Operating temperature range (°C)

-55 to 125

Offset drift (typ) (µV/°C)

7

Input bias current (max) (pA)

50000

CMRR (typ) (dB)

80

Iout (typ) (A)

0.03

Architecture

Bipolar

Input common mode headroom (to negative supply) (typ) (V)

0

Input common mode headroom (to positive supply) (typ) (V)

0

Output swing headroom (to negative supply) (typ) (V)

0.02

Output swing headroom (to positive supply) (typ) (V)

-3

Number of channels

2

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

32

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

3

Rail-to-rail

In to V-

GBW (typ) (MHz)

0.7

Slew rate (typ) (V/µs)

0.3

Vos (offset voltage at 25°C) (max) (mV)

2

Iq per channel (typ) (mA)

0.35

Vn at 1 kHz (typ) (nV√Hz)

40

Rating

Military

Operating temperature range (°C)

-55 to 125

Offset drift (typ) (µV/°C)

7

Input bias current (max) (pA)

50000

CMRR (typ) (dB)

80

Iout (typ) (A)

0.03

Architecture

Bipolar

Input common mode headroom (to negative supply) (typ) (V)

0

Input common mode headroom (to positive supply) (typ) (V)

0

Output swing headroom (to negative supply) (typ) (V)

0.02

Output swing headroom (to positive supply) (typ) (V)

-3

TO-CAN (LMC)

8

80.2816 mm² (8.96 mm × 8.96 mm)

CDIP (NAB)

8

79.9592 mm² (— mm × — mm)

DIESALE (Y)

—

See data sheet

CFP (NAC)

10

62.9285 mm² (— mm × — mm)

Available with Radiation Specification
- High Dose Rate 100 krad(Si)
- ELDRS Free 100 krad(Si)
Internally Frequency Compensated for Unity Gain
Large DC Voltage Gain: 100 dB
Wide Bandwidth (Unity Gain): 1 MH z(Temperature Compensated)
Wide Power Supply Range:
- Single Supply: 3V to 32V
- Or Dual Supplies: ±1.5V to ±16V
Very Low Supply Current Drain (500 μA) − Essentially Independent of Supply Voltage
Low Input Offset Voltage: 2 mV
Input Common-mode Voltage Range Includes Ground
Differential Input Voltage Range Equal to the Power Supply Voltage
Large Output Voltage Swing: 0V to V⁺ − 1.5V

All trademarks are the property of their respective owners.

Available with Radiation Specification
- High Dose Rate 100 krad(Si)
- ELDRS Free 100 krad(Si)
Internally Frequency Compensated for Unity Gain
Large DC Voltage Gain: 100 dB
Wide Bandwidth (Unity Gain): 1 MH z(Temperature Compensated)
Wide Power Supply Range:
- Single Supply: 3V to 32V
- Or Dual Supplies: ±1.5V to ±16V
Very Low Supply Current Drain (500 μA) − Essentially Independent of Supply Voltage
Low Input Offset Voltage: 2 mV
Input Common-mode Voltage Range Includes Ground
Differential Input Voltage Range Equal to the Power Supply Voltage
Large Output Voltage Swing: 0V to V⁺ − 1.5V

All trademarks are the property of their respective owners.

The LM158 series consists of two independent, high gain, internally frequency compensated operational amplifiers which were designed specifically to operate from a single power supply over a wide range of voltages. Operation from split power supplies is also possible and the low power supply current drain is independent of the magnitude of the power supply voltage.

Application areas include transducer amplifiers, dc gain blocks and all the conventional op amp circuits which now can be more easily implemented in single power supply systems. For example, the LM158 series can be directly operated off of the standard +5V power supply voltage which is used in digital systems and will easily provide the required interface electronics without requiring the additional ±15V power supplies.

The LM158 series consists of two independent, high gain, internally frequency compensated operational amplifiers which were designed specifically to operate from a single power supply over a wide range of voltages. Operation from split power supplies is also possible and the low power supply current drain is independent of the magnitude of the power supply voltage.

Application areas include transducer amplifiers, dc gain blocks and all the conventional op amp circuits which now can be more easily implemented in single power supply systems. For example, the LM158 series can be directly operated off of the standard +5V power supply voltage which is used in digital systems and will easily provide the required interface electronics without requiring the additional ±15V power supplies.

filter

Buscar otro/a Amplificadores de propósito general

Descargar Ver vídeo con transcripción Video

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.

Ver todo 4

Documentación principal	Tipo	Título	Fecha
*	Hoja de datos	LM158QML Low Power Dual Operational Amplifiers datasheet (Rev. F)	26/03/2013
*	Informe de radiación y confiabilidad	LM158AxRLQMLV ELDRS Report	11/05/2012
*	Informe de radiación y confiabilidad	LM158AxRLQMLV SET Data	11/05/2012
*	SMD	LM158QML SMD 5962-87710	21/06/2016

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Modelo de simulación