LM358BA

ACTIVO

Amplificador operacional doble de 36 V, 1.2 MHz y tensión de offset de 2 mV

Haga su pedido ahora

Hoja de datos

document-pdfAcrobat Industry-Standard Dual Operational Amplifiers datasheet (Rev. AA) (Inglés) PDF | HTML

LM358BA

ACTIVO

Hoja de datos

Haga su pedido ahora

Detalles del producto

Number of channels

2

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

36

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

3

Rail-to-rail

In to V-

GBW (typ) (MHz)

1.2

Slew rate (typ) (V/µs)

0.5

Vos (offset voltage at 25°C) (max) (mV)

2

Iq per channel (typ) (mA)

0.3

Vn at 1 kHz (typ) (nV√Hz)

40

Rating

Catalog

Operating temperature range (°C)

-40 to 85

Offset drift (typ) (µV/°C)

3.5

Features

Cost Optimized, EMI Hardened, Standard Amps

Input bias current (max) (pA)

35000

CMRR (typ) (dB)

94

Iout (typ) (A)

0.03

Architecture

Bipolar

Input common mode headroom (to negative supply) (typ) (V)

0

Input common mode headroom (to positive supply) (typ) (V)

-1.5

Output swing headroom (to negative supply) (typ) (V)

0.005

Output swing headroom (to positive supply) (typ) (V)

-1.4

Number of channels

2

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

36

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

3

Rail-to-rail

In to V-

GBW (typ) (MHz)

1.2

Slew rate (typ) (V/µs)

0.5

Vos (offset voltage at 25°C) (max) (mV)

2

Iq per channel (typ) (mA)

0.3

Vn at 1 kHz (typ) (nV√Hz)

40

Rating

Catalog

Operating temperature range (°C)

-40 to 85

Offset drift (typ) (µV/°C)

3.5

Features

Cost Optimized, EMI Hardened, Standard Amps

Input bias current (max) (pA)

35000

CMRR (typ) (dB)

94

Iout (typ) (A)

0.03

Architecture

Bipolar

Input common mode headroom (to negative supply) (typ) (V)

0

Input common mode headroom (to positive supply) (typ) (V)

-1.5

Output swing headroom (to negative supply) (typ) (V)

0.005

Output swing headroom (to positive supply) (typ) (V)

-1.4

SOIC (D)

8

29.4 mm² 4.9 x 6

SOT-23-THN (DDF)

8

8.12 mm² 2.9 x 2.8

TSSOP (PW)

8

19.2 mm² 3 x 6.4

VSSOP (DGK)

8

14.7 mm² 3 x 4.9

Wide supply range of 3 V to 36 V (B, BA versions)
Quiescent current: 300 µA/ch (B, BA versions)
Unity-gain bandwidth of 1.2 MHz (B, BA versions)
Common-mode input voltage range includes ground, enabling direct sensing near ground
2-mV input offset voltage max. at 25°C (BA version)
3-mV input offset voltage max. at 25°C (A, B versions)
Internal RF and EMI filter (B, BA versions)
On products compliant to MIL-PRF-38535, all parameters are tested unless otherwise noted. On all other products, production processing does not necessarily include testing of all parameters.

Wide supply range of 3 V to 36 V (B, BA versions)
Quiescent current: 300 µA/ch (B, BA versions)
Unity-gain bandwidth of 1.2 MHz (B, BA versions)
Common-mode input voltage range includes ground, enabling direct sensing near ground
2-mV input offset voltage max. at 25°C (BA version)
3-mV input offset voltage max. at 25°C (A, B versions)
Internal RF and EMI filter (B, BA versions)
On products compliant to MIL-PRF-38535, all parameters are tested unless otherwise noted. On all other products, production processing does not necessarily include testing of all parameters.

The LM358B and LM2904B devices are the next-generation versions of the industry-standard operational amplifiers (op amps) LM358 and LM2904, which include two high-voltage (36 V) op amps. These devices provide outstanding value for cost-sensitive applications, with features including low offset (300 µV, typical), common-mode input range to ground, and high differential input voltage capability.

The LM358B and LM2904B op amps simplify circuit design with enhanced features such as unity-gain stability, lower offset voltage maximum of 3 mV (2 mV maximum for LM358BA and LM2904BA), and lower quiescent current of 300 µA per amplifier (typical). High ESD (2 kV, HBM) and integrated EMI and RF filters enable the LM358B and LM2904B devices to be used in the most rugged, environmentally challenging applications.

The LM358B and LM2904B amplifiers are available in micro-sized packaging, such as the SOT23-8, as well as industry standard packages including SOIC, TSSOP, and VSSOP.

The LM358B and LM2904B devices are the next-generation versions of the industry-standard operational amplifiers (op amps) LM358 and LM2904, which include two high-voltage (36 V) op amps. These devices provide outstanding value for cost-sensitive applications, with features including low offset (300 µV, typical), common-mode input range to ground, and high differential input voltage capability.

The LM358B and LM2904B op amps simplify circuit design with enhanced features such as unity-gain stability, lower offset voltage maximum of 3 mV (2 mV maximum for LM358BA and LM2904BA), and lower quiescent current of 300 µA per amplifier (typical). High ESD (2 kV, HBM) and integrated EMI and RF filters enable the LM358B and LM2904B devices to be used in the most rugged, environmentally challenging applications.

The LM358B and LM2904B amplifiers are available in micro-sized packaging, such as the SOT23-8, as well as industry standard packages including SOIC, TSSOP, and VSSOP.

open-in-new

Buscar otro/a Amplificadores de propósito general

Descargar Ver vídeo con transcripción Video

Documentación técnica

star

=Principal documentación para este producto seleccionada por TI

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.

Ver todo 2

	Tipo	Título		Fecha
*	Data sheet	Industry-Standard Dual Operational Amplifiers datasheet (Rev. AA)	PDF \| HTML	22 mar 2022
	Application note	Application Design Guidelines for LM324 and LM358 Devices (Rev. B)	PDF \| HTML	19 jul 2023

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

DIP-ADAPTER-EVM — Módulo de evaluación de adaptador DIP

Speed up your op amp prototyping and testing with the DIP-Adapter-EVM, which provides a fast, easy and inexpensive way to interface with small, surface-mount ICs. You can connect any supported op amp using the included Samtec terminal strips or wire them directly to existing circuits.

The (...)

Guía del usuario: PDF

No disponible en TI.com

Placa de evaluación

DUAL-DIYAMP-EVM — Módulo de evaluación de circuito del amplificador universal de dos canales 'Hazlo tú mismo' (DIY)

The DUAL-DIYAMP-EVM is a unique evaluation module (EVM) family that provides engineers and do it yourselfers (DIYers) with real-world amplifier circuits, enabling you to quickly evaluate design concepts and verify simulations. It is designed specifically for dual package op amps in the (...)

Guía del usuario: PDF

No disponible en TI.com

Modelo de simulación

LMx58BA_LM2904BA PSpice Model (Rev. C)

SLOM475C.ZIP (30 KB) - PSpice Model

Descargar

Modelo de simulación

LMx58BA_LM2904BA Reference Design (Rev. A)

SLOM477A.TSC (113 KB) - TINA-TI Reference Design

Descargar

Modelo de simulación

LMx58BA_LM2904BA TINA-TI Macro (Rev. A)

SLOM476A.ZIP (4 KB) - TINA-TI Spice Model

Descargar

Herramienta de cálculo

ANALOG-ENGINEER-CALC — Calculadora para ingenieros analógicos

The analog engineer’s calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting operational-amplifier (...)

Ver opciones

Herramienta de diseño

CIRCUIT060013 — Amplificador de inversión con circuito de realimentación de red T.

Este diseño invierte la señal de entrada, V_IN, y aplica una ganancia de señal de 1000 V/V o 60 dB. El amplificador inversor con red de realimentación en T se puede utilizar para obtener una alta ganancia sin un valor pequeño para R4 o valores muy grandes para las resistencias de realimentación.

Ver opciones

Herramienta de diseño

CIRCUIT060015 — Circuito de tensión de referencia ajustable

Este circuito combina un amplificador inversor y no inversor para ajustar una tensión de referencia desde el negativo de la tensión de entrada hasta la tensión de entrada. Se puede agregar ganancia para aumentar el nivel de referencia negativo máximo.

Ver opciones

Herramienta de diseño

CIRCUIT060074 — Detección de corriente de lado alto con circuito comparador

Esta solución de detección de corriente de lado alto utiliza un comparador con un rango de modo común de entrada de carril a carril para crear una señal de alerta de sobrecorriente (OC-Alert) en la salida del comparador (COMP OUT) si la corriente de carga supera 1 A. La señal OC-Alert en esta (...)

Ver opciones

Herramienta de simulación

PSPICE-FOR-TI — PSpice® para herramienta de diseño y simulación de TI

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)

Solicitar

Herramienta de simulación

TINA-TI — Programa de simulación analógica basado en SPICE

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)

Guía del usuario: PDF

Ver opciones

Paquete	Pasadores	Descargar
SOIC (D)	8	Ver opciones
SOT-23-THN (DDF)	8	Ver opciones
TSSOP (PW)	8	Ver opciones
VSSOP (DGK)	8	Ver opciones

Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

LM358BA

Amplificador operacional doble de 36 V, 1.2 MHz y tensión de offset de 2 mV

LM358BA

Detalles del producto

Documentación técnica

Diseño y desarrollo

DIP-ADAPTER-EVM — Módulo de evaluación de adaptador DIP

DUAL-DIYAMP-EVM — Módulo de evaluación de circuito del amplificador universal de dos canales 'Hazlo tú mismo' (DIY)

LMx58BA_LM2904BA PSpice Model (Rev. C)

LMx58BA_LM2904BA Reference Design (Rev. A)

LMx58BA_LM2904BA TINA-TI Macro (Rev. A)

ANALOG-ENGINEER-CALC — Calculadora para ingenieros analógicos

CIRCUIT060013 — Amplificador de inversión con circuito de realimentación de red T.

CIRCUIT060015 — Circuito de tensión de referencia ajustable

CIRCUIT060074 — Detección de corriente de lado alto con circuito comparador

PSPICE-FOR-TI — PSpice® para herramienta de diseño y simulación de TI

TINA-TI — Programa de simulación analógica basado en SPICE

Pedidos y calidad

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Serie de videos

Videos