Inicio Administración de potencia Reguladores conmutados CC/CC Convertidores de CC/CC

LM5168

ACTIVO

Convertidor CC-CC de 6 V a 120 V de VIN ancho y 300 mA con función Fly-Buck™

Detalles del producto

Rating Catalog Topology Buck, Flybuck Iout (max) (A) 0.3 Vin (max) (V) 120 Vin (min) (V) 6 Vout (max) (V) 48 Vout (min) (V) 1.2 Switch current limit (typ) (A) 0.3 Features Enable, Forced PWM, Light Load Efficiency, Over Current Protection, Power good, Pre-Bias Start-Up, Soft Start Fixed, Synchronous Rectification, UVLO adjustable Control mode Constant on-time (COT) Operating temperature range (°C) -40 to 150 Iq (typ) (A) 0.00001 Duty cycle (max) (%) 100 TI functional safety category Functional Safety-Capable Sector Robotics
Rating Catalog Topology Buck, Flybuck Iout (max) (A) 0.3 Vin (max) (V) 120 Vin (min) (V) 6 Vout (max) (V) 48 Vout (min) (V) 1.2 Switch current limit (typ) (A) 0.3 Features Enable, Forced PWM, Light Load Efficiency, Over Current Protection, Power good, Pre-Bias Start-Up, Soft Start Fixed, Synchronous Rectification, UVLO adjustable Control mode Constant on-time (COT) Operating temperature range (°C) -40 to 150 Iq (typ) (A) 0.00001 Duty cycle (max) (%) 100 TI functional safety category Functional Safety-Capable Sector Robotics
HSOIC (DDA) 8 29.4 mm² (4.9 mm × 6 mm) WSON (NGU) 8 16 mm² (4 mm × 4 mm)
  • Functional Safety-Capable
  • Designed for reliability in rugged applications
    • Wide input voltage range of 6V to 120V absolute maximum
    • Junction temperature range: –40°C to +150°C
    • Fixed 3ms internal soft-start timer
    • Peak and valley current-limit protection
    • Input UVLO and thermal shutdown protection
  • Designed for scalable industrial power supplies and battery packs
    • Low minimum on and off times of 50ns
    • Adjustable switching frequency up to 1MHz
    • Diode emulation for high light-load efficiency
    • Auto mode with low quiescent current (< 10µA)
    • FPWM for Fly-Buck converter capability
    • 3µA shutdown quiescent current
    • Pin-to-pin compatible with LM5164-Q1, LM5163-Q1, and LM5013-Q1
    • Similar pinout and functionality to LM5017 and LM34927.
  • Integration reduces design size and cost
    • COT mode control architecture
    • Integrated 1.9Ω NFET buck switch
    • Integrated 0.71Ω NFET synchronous rectifier
    • 1.2V internal voltage reference
    • No loop compensation components
    • Internal VCC bias regulator and boot diode
    • Open-drain power-good indicator
    • Package options: SOIC PowerPAD™-8 integrated circuit package or WSON-8 package
  • Functional Safety-Capable
  • Designed for reliability in rugged applications
    • Wide input voltage range of 6V to 120V absolute maximum
    • Junction temperature range: –40°C to +150°C
    • Fixed 3ms internal soft-start timer
    • Peak and valley current-limit protection
    • Input UVLO and thermal shutdown protection
  • Designed for scalable industrial power supplies and battery packs
    • Low minimum on and off times of 50ns
    • Adjustable switching frequency up to 1MHz
    • Diode emulation for high light-load efficiency
    • Auto mode with low quiescent current (< 10µA)
    • FPWM for Fly-Buck converter capability
    • 3µA shutdown quiescent current
    • Pin-to-pin compatible with LM5164-Q1, LM5163-Q1, and LM5013-Q1
    • Similar pinout and functionality to LM5017 and LM34927.
  • Integration reduces design size and cost
    • COT mode control architecture
    • Integrated 1.9Ω NFET buck switch
    • Integrated 0.71Ω NFET synchronous rectifier
    • 1.2V internal voltage reference
    • No loop compensation components
    • Internal VCC bias regulator and boot diode
    • Open-drain power-good indicator
    • Package options: SOIC PowerPAD™-8 integrated circuit package or WSON-8 package

The LM5169 and LM5168 synchronous buck converters are designed to regulate over a wide input voltage range, minimizing the need for external surge suppression components. A minimum controllable on time of 50ns facilitates large step-down conversion ratios, enabling the direct step-down from a 48V nominal input to low-voltage rails for reduced system complexity and design cost. The LM516x operates during input voltage dips as low as 6V, at nearly 100% duty cycle if needed, making the device an excellent choice for wide input supply range industrial and high cell count battery pack applications.

With integrated high-side and low-side power MOSFETs, the LM5169 delivers up to 0.65A of output current and the LM5168 delivers up to 0.3A of output current. A constant on-time (COT) control architecture provides nearly constant switching frequency with excellent load and line transient response. The LM516x is available in FPWM or auto mode versions. FPWM mode provides forced CCM operation across the entire load range supporting isolated Fly-Buck converter applications. Auto mode enables ultra-low IQ and diode emulation mode operation for high light-load efficiency.

The LM5169 and LM5168 synchronous buck converters are designed to regulate over a wide input voltage range, minimizing the need for external surge suppression components. A minimum controllable on time of 50ns facilitates large step-down conversion ratios, enabling the direct step-down from a 48V nominal input to low-voltage rails for reduced system complexity and design cost. The LM516x operates during input voltage dips as low as 6V, at nearly 100% duty cycle if needed, making the device an excellent choice for wide input supply range industrial and high cell count battery pack applications.

With integrated high-side and low-side power MOSFETs, the LM5169 delivers up to 0.65A of output current and the LM5168 delivers up to 0.3A of output current. A constant on-time (COT) control architecture provides nearly constant switching frequency with excellent load and line transient response. The LM516x is available in FPWM or auto mode versions. FPWM mode provides forced CCM operation across the entire load range supporting isolated Fly-Buck converter applications. Auto mode enables ultra-low IQ and diode emulation mode operation for high light-load efficiency.

Descargar Ver vídeo con transcripción Video

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 6
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos LM516x, 0.65A/0.3A, 120V Absolute Maximum, Step-Down Converter With Fly-Buck Converter Capability datasheet (Rev. B) PDF | HTML 16/12/2024
Información sobre seguridad funcional LM5168 and LM5169 Functional Safety FIT Rate, FMD and Pin FMA (Rev. A) PDF | HTML 11/11/2024
Nota sobre la aplicación Inverting Buck-Boost Application for the LM5168 PDF | HTML 24/02/2023
Nota sobre la aplicación Design Considerations of Stacked BQ769x2 With High-Side N-MOSFET PDF | HTML 9/02/2023
Información sobre seguridad funcional LM516x-Q1 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA (Rev. A) PDF | HTML 1/09/2022
Certificado LM5168FEVM EU RoHS Declaration of Conformity (DoC) 20/10/2021

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

LM5168FEVM — Módulo de evaluación LM5168 de regulador Fly-Buck de 115 V

El módulo de evaluación (EVM) LM5168FEVM es un circuito completamente ensamblado y probado para evaluar LM5168, un regulador Fly-Buck CC/CC de 115 V que emplea la rectificación síncrona para lograr una alta eficiencia de conversión en un tamaño reducido. El EVM funciona en un amplio rango de (...)
Guía del usuario: PDF | HTML
Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
Placa de evaluación

LM5168PEVM — Módulo de evaluación del regulador reductor CC/CC de 115 V LM5168P

El módulo de evaluación (EVM) LM5168P es un regulador reductor CC/CC de 115 V que emplea rectificación síncrona para lograr una alta eficiencia de conversión en un tamaño reducido. El EVM funciona en un amplio rango de tensión de entrada de 20 V a 115 V (120 V máximo absoluto) para proporcionar una (...)

Guía del usuario: PDF | HTML
Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
Modelo de simulación

LM5168F PSpice Unencrypted Transient Model

SNVMCA0.ZIP (262 KB) - Modelo PSpice
Productos y hardware compatibles
Herramienta de cálculo

SNVR520 — LM5169 Quick Start Calculator

Quick Start Calculator for LM5169
Productos y hardware compatibles
Diseño de referencia

TIDA-010247 — Diseño de referencia de unidad de gestión de batería de alta precisión para sistema de almacenamient

Este diseño de referencia es una unidad de gestión de batería (BMU) de control MOSFET de canal N de lado alto (hasta 32s) que usa la familia de monitores de batería apilados BQ769x2. Este diseño también integra una interfaz CAN para tareas de apilamiento de la unidad de gestión de batería BMU de (...)
Productos y hardware compatibles
Diseño de referencia

TIDA-010976 — Diseño de referencia de unidad de gestión de baterías inalámbricas 52s para sistemas de almacenamien

Este diseño de referencia proporciona una unidad de gestión de baterías (wBMU) inalámbrica de 52s para sistemas de almacenamiento de energía con alta exactitud de tensión de celda. La wBMU envía los datos de tensión y temperatura de cada celda al controlador host en tiempo real mediante la (...)
Productos y hardware compatibles
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
HSOIC (DDA) 8 Ultra Librarian
WSON (NGU) 8 Ultra Librarian

Pedidos y calidad

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos