Inicio Amplificadores Amplificadores operacionales (op amps) Amplificadores operacionales de alta velocidad (GBW ≥ 50 MHz)
Inicio
Amplificadores
Amplificadores operacionales (op amps)
Amplificadores operacionales de alta velocidad (GBW ≥ 50 MHz)

OPA847

ACTIVO

Amplificador operacional de banda ancha, ultrabajo ruido, con retroalimentación de voltaje y descone

Haga su pedido ahora
Hoja de datos

Se encuentra disponible una versión más nueva de este producto

open-in-new Comparar alternativas
Misma funcionalidad con diferente configuración de pines que el dispositivo comparado
OPA892 ACTIVO Amplificador operacional de 2 GHz, 10 V/V, 0.95 nV√Hz estable con distorsión armónica total (THD) ul Wider Voltage (36 V), lower Iq (7.5 mA), lower offset drift (1 µV/°C), and lower THD + N ( -114 dB)

OPA847

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Architecture Voltage FB Number of channels 1 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 10 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 12 GBW (typ) (MHz) 3900 BW at Acl (MHz) 600 Acl, min spec gain (V/V) 12 Slew rate (typ) (V/µs) 950 Vn at flatband (typ) (nV√Hz) 0.85 Vn at 1 kHz (typ) (nV√Hz) 1.4 Iq per channel (typ) (mA) 18.1 Vos (offset voltage at 25°C) (max) (mV) 0.6 Rail-to-rail No Features Decompensated, Shutdown Rating Catalog Operating temperature range (°C) -40 to 85 CMRR (typ) (dB) 110 Input bias current (max) (pA) 39000000 Offset drift (typ) (µV/°C) 0.25 Iout (typ) (mA) 75 2nd harmonic (dBc) 74 3rd harmonic (dBc) 103 Frequency of harmonic distortion measurement (MHz) 5
Architecture Voltage FB Number of channels 1 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 10 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 12 GBW (typ) (MHz) 3900 BW at Acl (MHz) 600 Acl, min spec gain (V/V) 12 Slew rate (typ) (V/µs) 950 Vn at flatband (typ) (nV√Hz) 0.85 Vn at 1 kHz (typ) (nV√Hz) 1.4 Iq per channel (typ) (mA) 18.1 Vos (offset voltage at 25°C) (max) (mV) 0.6 Rail-to-rail No Features Decompensated, Shutdown Rating Catalog Operating temperature range (°C) -40 to 85 CMRR (typ) (dB) 110 Input bias current (max) (pA) 39000000 Offset drift (typ) (µV/°C) 0.25 Iout (typ) (mA) 75 2nd harmonic (dBc) 74 3rd harmonic (dBc) 103 Frequency of harmonic distortion measurement (MHz) 5
SOIC (D) 8 29.4 mm² 4.9 x 6 SOT-23 (DBV) 6 8.12 mm² 2.9 x 2.8
  • HIGH GAIN BANDWIDTH: 3.9GHz
  • LOW INPUT VOLTAGE NOISE: 0.85nV/√Hz
  • VERY LOW DISTORTION: –105dBc (5MHz)
  • HIGH SLEW RATE: 950V/µs
  • HIGH DC ACCURACY: VIO < ±100µV
  • LOW SUPPLY CURRENT: 18.1mA
  • LOW SHUTDOWN POWER: 2mW
  • STABLE FOR GAINS 12
  • APPLICATIONS
    • HIGH DYNAMIC RANGE ADC PREAMPS
    • LOW NOISE, WIDEBAND, TRANSIMPEDANCE AMPLIFIERS
    • WIDEBAND, HIGH GAIN AMPLIFIERS
    • LOW NOISE DIFFERENTIAL RECEIVERS
    • ULTRASOUND CHANNEL AMPLIFIERS
    • IMPROVED UPGRADE FOR THE OPA687, CLC425, AND LMH6642

All trademarks are the property of their respective owners.
  • HIGH GAIN BANDWIDTH: 3.9GHz
  • LOW INPUT VOLTAGE NOISE: 0.85nV/√Hz
  • VERY LOW DISTORTION: –105dBc (5MHz)
  • HIGH SLEW RATE: 950V/µs
  • HIGH DC ACCURACY: VIO < ±100µV
  • LOW SUPPLY CURRENT: 18.1mA
  • LOW SHUTDOWN POWER: 2mW
  • STABLE FOR GAINS 12
  • APPLICATIONS
    • HIGH DYNAMIC RANGE ADC PREAMPS
    • LOW NOISE, WIDEBAND, TRANSIMPEDANCE AMPLIFIERS
    • WIDEBAND, HIGH GAIN AMPLIFIERS
    • LOW NOISE DIFFERENTIAL RECEIVERS
    • ULTRASOUND CHANNEL AMPLIFIERS
    • IMPROVED UPGRADE FOR THE OPA687, CLC425, AND LMH6642

All trademarks are the property of their respective owners.

The OPA847 combines very high gain bandwidth and large signal performance with an ultra-low input noise voltage (0.85nV/√Hz) while using only 18mA supply current. Where power saving is critical, the OPA847 also includes an optional power shutdown pin that, when pulled low, disables the amplifier and decreases the supply current to < 1% of the powered-up value. This optional feature may be left disconnected to ensure normal amplifier operation when no power-down is required.

The combination of very low input voltage and current noise, along with a 3.9GHz gain bandwidth product, make the OPA847 an ideal amplifier for wideband transimpedance applications. As a voltage gain stage, the OPA847 is optimized for a flat frequency response at a gain of +20V/V and is stable down to gains as low as +12V/V. New external compensation techniques allow the OPA847 to be used at any inverting gain with excellent frequency response control. Using this technique in a differential Analog-to-Digital Converter (ADC) interface application, shown below, can deliver one of the highest dynamic range interfaces available.

The OPA847 combines very high gain bandwidth and large signal performance with an ultra-low input noise voltage (0.85nV/√Hz) while using only 18mA supply current. Where power saving is critical, the OPA847 also includes an optional power shutdown pin that, when pulled low, disables the amplifier and decreases the supply current to < 1% of the powered-up value. This optional feature may be left disconnected to ensure normal amplifier operation when no power-down is required.

The combination of very low input voltage and current noise, along with a 3.9GHz gain bandwidth product, make the OPA847 an ideal amplifier for wideband transimpedance applications. As a voltage gain stage, the OPA847 is optimized for a flat frequency response at a gain of +20V/V and is stable down to gains as low as +12V/V. New external compensation techniques allow the OPA847 to be used at any inverting gain with excellent frequency response control. Using this technique in a differential Analog-to-Digital Converter (ADC) interface application, shown below, can deliver one of the highest dynamic range interfaces available.
filter Buscar otro/a Amplificadores operacionales de alta velocidad (GBW ≥ 50 MHz)
Descargar Ver vídeo con transcripción Video

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 14
Documentación principal Tipo Título Opciones de formato Fecha
* Data sheet Wideband, Ultra Low-Noise, Voltage-Feedback Operational Amplifier with Shutdown datasheet (Rev. E) 30 dic 2008
E-book The Signal e-book: A compendium of blog posts on op amp design topics 28 mar 2017
Application note RLC Filter Design for ADC Interface Applications (Rev. A) 13 may 2015
User guide DEM-OPA-SO-1A User's Guide (Rev. B) 12 abr 2012
User guide DEM-OPA-SO-1B User's Guide (Rev. D) 12 abr 2012
User guide DEM-OPA-SOT-1A User's Guide (Rev. B) 12 abr 2012
Application note Transimpedance Considerations for High-Speed Operational Amplifiers 22 nov 2009
User guide Voltage-Controlled Amplifier Evaluation Kit 25 ago 2008
User guide DEM-OPA-SOT-1B User's Guide (Rev. B) 12 abr 2006
Analog Design Journal Low-power, high-intercept interface to the ADS5424, 105-MSPS converter 10 oct 2005
Analog Design Journal Using a decompensated op amp for improved performance 11 mar 2005
Application note Noise Analysis for High Speed Op Amps (Rev. A) 17 ene 2005
Application note ADS5500, OPA695: PC Board Layout for Low Distortion High-Speed ADC Drivers 22 abr 2004
Application note Measuring Board Parasitics in High-Speed Analog Design 07 jul 2003

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

DEM-OPA-SO-1B — Módulo de evaluación de amplificador operacional simple para encapsulado SO-8 (sin inversión)

The DEM-OPA-SO-1B demonstration fixture in the non-inverting configuration helps designers evaluate the operation and performance of TI's single high speed, wideband operational amplifiers. This unpopulated PC board is compatible with products offered in the 8-lead SOIC (D) package.

For more (...)

Guía del usuario: PDF
No disponible en TI.com
Placa de evaluación

DEM-OPA-SOT-1B — Módulo de evaluación de amplificador operacional simple para encapsulado SOT23-5/6 (sin inversión)

The DEM-OPA-SOT-1B demonstration fixture in the non-inverting configuration helps designers evaluate the operation and performance of TI's single high speed, wideband operational amplifiers. This unpopulated PC board is compatible with products offered in the SOT23 (DBV) package.

Guía del usuario: PDF
No disponible en TI.com
Modelo de simulación

OPA847 ADS Model

SBOJ018.ZIP (54 KB) - Spice Model
Descargar
Modelo de simulación

OPA847 PSpice Model

SBOC037.ZIP (1 KB) - PSpice Model
Descargar
Modelo de simulación

OPA847 PSpice Model (Rev. A)

SBOC037A.ZIP (2 KB) - PSpice Model
Descargar
Modelo de simulación

OPA847 TINA-TI Reference Design (Rev. C)

SBOC098C.TSC (54 KB) - TINA-TI Reference Design
Descargar
Modelo de simulación

OPA847 TINA-TI Spice Model (Rev. A)

SBOM180A.ZIP (6 KB) - TINA-TI Spice Model
Descargar
Herramienta de cálculo

ANALOG-ENGINEER-CALC — PC software analog engineer's calculator

The analog engineer’s calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting operational-amplifier (...)

Productos y hardware compatibles

Productos y hardware compatibles
Iniciar Descargar
Herramienta de cálculo

VOLT-DIVIDER-CALC — Voltage divider calculation tool

<
Diseñar ahora
Herramienta de simulación

PSPICE-FOR-TI — PSpice® para herramienta de diseño y simulación de TI

PSpice® para TI es un entorno de diseño y simulación que ayuda a evaluar la funcionalidad de los circuitos analógicos. Esta completa suite de diseño y simulación utiliza un motor de análisis analógico de Cadence®. Disponible sin ningún costo, PSpice para TI incluye una de las bibliotecas de modelos (...)
Solicitar
Herramienta de simulación

TINA-TI — Programa de simulación analógica basado en SPICE

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
Guía del usuario: PDF
View Options
Diseños de referencia

TIPD147 — Post amplificador de medición de ruido para osciloscopio o analizador de espectro

In some cases a scope or spectrum analyzer does not have the range required to measure very small noise levels.  This noise measurement post-amp boosts the output noise of the device under test (DUT) to allow for measurement with standard test equipment. The key requirements of this circuit is (...)
Guía del usuario: PDF
Esquema: PDF
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
SOIC (D) 8 Ultra Librarian
SOT-23 (DBV) 6 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL)/reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos