Inicio Interfaz Circuitos integrados LVDS, M-LVDS y PECL
Inicio
Interfaz
Circuitos integrados LVDS, M-LVDS y PECL

SN55LVCP22A-SP

ACTIVO

Radiation-hardened, QML-V, 2×2 1Gbps LVDS crosspoint switch

Haga su pedido ahora
Hoja de datos

SN55LVCP22A-SP

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Function Crosspoint Protocols CML, LVDS, LVPECL Number of transmitters 2 Number of receivers 2 Signaling rate (Mbps) 1000 Input signal CML, LVDS, LVPECL Output signal BLVDS, LVCMOS, LVDS, LVTTL Rating Space Operating temperature range (°C) -55 to 125
Function Crosspoint Protocols CML, LVDS, LVPECL Number of transmitters 2 Number of receivers 2 Signaling rate (Mbps) 1000 Input signal CML, LVDS, LVPECL Output signal BLVDS, LVCMOS, LVDS, LVTTL Rating Space Operating temperature range (°C) -55 to 125
CFP (W) 16 69.319 mm² (— mm × — mm)
  • QML class V, RHA, SMD 5962-11242
  • Radiation performance
    • RHA to 100 krad(Si)
    • ELDRS free to 100 krad(Si)
    • SEL immune to LET = 75 MeV⋅cm2/mg
    • SEE characterized to LET = 75 MeV⋅cm2/mg
  • High-speed (up to 1000 Mbps)
  • Low-jitter fully differential data path
  • 50 ps (typ), of peak-to-peak jitter with PRBS = 223–1 pattern
  • Less than 227 mW (typ), 313 mW (max) total power dissipation
  • Output (channel-to-channel) skew is 80 ps (typ)
  • Configurable as 2:1 mux, 1:2 demux, repeater or 1:2 signal splitter
  • Inputs accept LVDS, LVPECL, and CML signals
  • Fast switch time of 1.7 ns (typ)
  • Fast propagation delay of 0.65 ns (typ)
  • Inter-operates with TIA/EIA-644-A LVDS standard
  • Supports defense, aerospace, and medical applications:
    • Controlled baseline
    • One assembly/test site and one fabrication site
    • Extended product life cycle and extended product-change notification
    • Product traceability
  • QML class V, RHA, SMD 5962-11242
  • Radiation performance
    • RHA to 100 krad(Si)
    • ELDRS free to 100 krad(Si)
    • SEL immune to LET = 75 MeV⋅cm2/mg
    • SEE characterized to LET = 75 MeV⋅cm2/mg
  • High-speed (up to 1000 Mbps)
  • Low-jitter fully differential data path
  • 50 ps (typ), of peak-to-peak jitter with PRBS = 223–1 pattern
  • Less than 227 mW (typ), 313 mW (max) total power dissipation
  • Output (channel-to-channel) skew is 80 ps (typ)
  • Configurable as 2:1 mux, 1:2 demux, repeater or 1:2 signal splitter
  • Inputs accept LVDS, LVPECL, and CML signals
  • Fast switch time of 1.7 ns (typ)
  • Fast propagation delay of 0.65 ns (typ)
  • Inter-operates with TIA/EIA-644-A LVDS standard
  • Supports defense, aerospace, and medical applications:
    • Controlled baseline
    • One assembly/test site and one fabrication site
    • Extended product life cycle and extended product-change notification
    • Product traceability

The SN55LVCP22A-SP is a 2×2 crosspoint switch providing greater than 1000 Mbps operation for each path. The dual channels incorporate wide common-mode (0 V to 4 V) receivers, allowing for the receipt of LVDS, LVPECL, and CML signals. The dual outputs are LVDS drivers to provide low-power, low-EMI, high-speed operation. The SN55LVCP22A-SP provides a single device supporting 2:2 buffering (repeating), 1:2 splitting, 2:1 multiplexing, 2×2 switching, and LVPECL/CML to LVDS level translation on each channel. The flexible operation of the SN55LVCP22A-SP provides a single device to support the redundant serial bus transmission needs (working and protection switching cards) of fault-tolerant switch systems found in optical networking, wireless infrastructure, and data communications systems.

The SN55LVCP22A-SP uses a fully differential data path to ensure low-noise generation, fast switching times, low pulse width distortion, and low jitter. Output channel-to- channel skew is 80 ps (typ) to ensure accurate alignment of outputs in all applications.

The SN55LVCP22A-SP is a 2×2 crosspoint switch providing greater than 1000 Mbps operation for each path. The dual channels incorporate wide common-mode (0 V to 4 V) receivers, allowing for the receipt of LVDS, LVPECL, and CML signals. The dual outputs are LVDS drivers to provide low-power, low-EMI, high-speed operation. The SN55LVCP22A-SP provides a single device supporting 2:2 buffering (repeating), 1:2 splitting, 2:1 multiplexing, 2×2 switching, and LVPECL/CML to LVDS level translation on each channel. The flexible operation of the SN55LVCP22A-SP provides a single device to support the redundant serial bus transmission needs (working and protection switching cards) of fault-tolerant switch systems found in optical networking, wireless infrastructure, and data communications systems.

The SN55LVCP22A-SP uses a fully differential data path to ensure low-noise generation, fast switching times, low pulse width distortion, and low jitter. Output channel-to- channel skew is 80 ps (typ) to ensure accurate alignment of outputs in all applications.
filter Buscar otro/a Circuitos integrados LVDS, M-LVDS y PECL
Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Pin por pin con la misma funcionalidad que el dispositivo comparado
SN55LVCP22 ACTIVO Interruptor de conexión cruzada LVDS de 1 Gbps de clase QML, 2×2 Military grade variant

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 8
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos SN55LVCP22A-SP QML Class V 2×2 1-Gbps LVDS Crosspoint Switch datasheet PDF | HTML 29/05/2020
* Informe de radiación y confiabilidad SN55LVCP22A-SP Total Ionizing Dose (TID) Lookahead 6/02/2021
* SMD SN55LVCP22A-SP SMD 5962-11242 8/07/2016
Guía de selección TI Space Products (Rev. L) 27/03/2026
Application brief DLA Approved Optimizations for QML Products (Rev. C) PDF | HTML 17/06/2025
Nota sobre la aplicación Heavy Ion Orbital Environment Single-Event Effects Estimations (Rev. B) PDF | HTML 10/06/2025
Más documentación TI Engineering Evaluation Units vs. MIL-PRF-38535 QML Class V Processing (Rev. B) 20/02/2025
Nota sobre la aplicación Single-Event Effects Confidence Interval Calculations (Rev. A) PDF | HTML 19/10/2022

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

SN55LVCP22EVM-CVAL — SN55LVCP22-SP Módulo de evaluación

The SN55LVCP22 (LVDS output) is a high-speed 2x2 crosspoint switch. The four different functions that this crosspoint provides are shown below. The functions are selected via pins SEL0 and SEL1. Control pins EN0 and EN1 enable or disable the outputs. The receiver has a wide input common-mode (...)

Guía del usuario: PDF
Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
CFP (W) 16 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos