Inicio Interfaz Transceptores RS-485 y RS-422
Inicio
Interfaz
Transceptores RS-485 y RS-422

THVD1505

ACTIVO

Transceptor RS-485 de corrección de polaridad de bus con protección IEC ESD

Haga su pedido ahora
Hoja de datos

THVD1505

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Number of receivers 1 Number of transmitters 1 Duplex Half Supply voltage (nom) (V) 5 Signaling rate (max) (MBits) 1 IEC 61000-4-2 contact (±V) 8000 Fault protection (V) -18 to 18 Common-mode range (V) -7 to 12 Number of nodes 256 Features Auto polarity, IEC ESD protection Isolated No Supply current (max) (µA) 1100 Rating Catalog Operating temperature range (°C) -40 to 125
Number of receivers 1 Number of transmitters 1 Duplex Half Supply voltage (nom) (V) 5 Signaling rate (max) (MBits) 1 IEC 61000-4-2 contact (±V) 8000 Fault protection (V) -18 to 18 Common-mode range (V) -7 to 12 Number of nodes 256 Features Auto polarity, IEC ESD protection Isolated No Supply current (max) (µA) 1100 Rating Catalog Operating temperature range (°C) -40 to 125
SOIC (D) 8 29.4 mm² 4.9 x 6
  • Meets or exceeds the requirements of the TIA/EIA-485A standard and the State Grid Corporation of China (SGCC) Part 11 Serial Communication Protocol RS-485 standard
  • 4.5-V to 5.5-V supply voltage
  • Half-duplex RS-422 / RS-485
  • Bus polarity correction within 45 ms
  • Works with or without fail-safe biasing resistors
  • Data rate: up to 1 Mbps
  • Bus I/O protection:
    • ±16-kV HBM ESD
    • ±8-kV IEC 61000-4-2 contact discharge
    • ±8-kV IEC 61000-4-2 air-gap discharge
    • ±2-kV IEC 61000-4-4 fast transient burst
  • Open, short, and idle bus fail-safe
  • Large receiver hysteresis
    for noise rejection: 120 mV
  • Up to 256 nodes on a bus (1/8 unit load)
  • Extended ambient temperature
    range: -40°C to 125°C
  • Low power consumption
    • Standby supply current: < 1 µA
    • Operational supply current: < 1.1 mA
  • Glitch-free power-up / down for hot plug-in capability
  • Meets or exceeds the requirements of the TIA/EIA-485A standard and the State Grid Corporation of China (SGCC) Part 11 Serial Communication Protocol RS-485 standard
  • 4.5-V to 5.5-V supply voltage
  • Half-duplex RS-422 / RS-485
  • Bus polarity correction within 45 ms
  • Works with or without fail-safe biasing resistors
  • Data rate: up to 1 Mbps
  • Bus I/O protection:
    • ±16-kV HBM ESD
    • ±8-kV IEC 61000-4-2 contact discharge
    • ±8-kV IEC 61000-4-2 air-gap discharge
    • ±2-kV IEC 61000-4-4 fast transient burst
  • Open, short, and idle bus fail-safe
  • Large receiver hysteresis
    for noise rejection: 120 mV
  • Up to 256 nodes on a bus (1/8 unit load)
  • Extended ambient temperature
    range: -40°C to 125°C
  • Low power consumption
    • Standby supply current: < 1 µA
    • Operational supply current: < 1.1 mA
  • Glitch-free power-up / down for hot plug-in capability

The THVD1505 is a low-power RS-485 transceiver with automatic bus-polarity correction and transient protection. Upon hot plug-in, the device detects and corrects the bus polarity within the first 45 ms of bus idling. The bus pins are robust to electrostatic discharge (ESD) events, with high levels of protection to human-body model (HBM), IEC 61000-4-2 contact discharge and air-gap discharge specifications.

The device combines a differential driver and a differential receiver, which operate together from a single 5-V power supply. The driver differential outputs and the receiver differential inputs are connected internally to form a bus port suitable for half-duplex (two-wire bus) communication. The device features a wide common-mode voltage range making the device suitable for multi-point applications over long cable runs. The THVD1505 is available in an SOIC-8 package, and is characterized for free-air temperatures from –40°C to 125°C.

The THVD1505 is a low-power RS-485 transceiver with automatic bus-polarity correction and transient protection. Upon hot plug-in, the device detects and corrects the bus polarity within the first 45 ms of bus idling. The bus pins are robust to electrostatic discharge (ESD) events, with high levels of protection to human-body model (HBM), IEC 61000-4-2 contact discharge and air-gap discharge specifications.

The device combines a differential driver and a differential receiver, which operate together from a single 5-V power supply. The driver differential outputs and the receiver differential inputs are connected internally to form a bus port suitable for half-duplex (two-wire bus) communication. The device features a wide common-mode voltage range making the device suitable for multi-point applications over long cable runs. The THVD1505 is available in an SOIC-8 package, and is characterized for free-air temperatures from –40°C to 125°C.
open-in-new Buscar otro/a Transceptores RS-485 y RS-422
Descargar Ver vídeo con transcripción Video

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 3
Tipo Título Fecha
* Data sheet THVD1505 Bus-Polarity Correcting RS-485 Transceiver With IEC-ESD Protection datasheet PDF | HTML 08 ene 2018
Application note How to Properly Set Up THVD1505 and SN65HVD888 in Applications PDF | HTML 15 dic 2021
Technical article How much loading can an auto-polarity RS-485 bus support? PDF | HTML 24 may 2018

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

RS485-HF-DPLX-EVM — Módulo de evaluación RS-485 semidúplex

The RS-485 half-duplex evaluation module (EVM) helps designers evaluate device performance, supporting fast development and analysis of data-transmission systems using any of the SN65HVD1x, SN65HVD2x, SN65HVD7x, SN65HVD8x and SN65HVD96 half-duplex transceivers. The EVM board comes without the (...)
Guía del usuario: PDF | HTML
No disponible en TI.com
Modelo de simulación

THVD1505 IBIS Model

SLLM419.ZIP (32 KB) - IBIS Model
Descargar
Herramienta de simulación

PSPICE-FOR-TI — PSpice® para herramienta de diseño y simulación de TI

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Solicitar
Herramienta de simulación

TINA-TI — Programa de simulación analógica basado en SPICE

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
Guía del usuario: PDF
Ver opciones
Paquete Pasadores Descargar
SOIC (D) 8 Ver opciones
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos