TLV6003

ACTIVO

Amplificador operativo simple de entrada y salida rail-to-rail, precisión, de 16 V y potencia ultrab

Haga su pedido ahora

Hoja de datos

document-pdfAcrobat TLV6003 980-nA, 16-V, Precision, Rail-to-Rail Input and Output, Operational Amplifier datasheet (Inglés) PDF | HTML

TLV6003

ACTIVO

Haga su pedido ahora

Detalles del producto

Number of channels

1

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

16

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

2.5

Vos (offset voltage at 25°C) (max) (mV)

0.55

Offset drift (typ) (µV/°C)

2

Input bias current (max) (pA)

250

GBW (typ) (MHz)

0.0055

Slew rate (typ) (V/µs)

0.0025

Rail-to-rail

In, Out

Iq per channel (typ) (mA)

0.00098

CMRR (typ) (dB)

120

Rating

Catalog

Operating temperature range (°C)

-40 to 125

Iout (typ) (A)

0.0000002

Architecture

Bipolar

Input common mode headroom (to negative supply) (typ) (V)

-0.1

Input common mode headroom (to positive supply) (typ) (V)

5

Output swing headroom (to negative supply) (typ) (V)

0.09

Output swing headroom (to positive supply) (typ) (V)

-0.02

Number of channels

1

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

16

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

2.5

Vos (offset voltage at 25°C) (max) (mV)

0.55

Offset drift (typ) (µV/°C)

2

Input bias current (max) (pA)

250

GBW (typ) (MHz)

0.0055

Slew rate (typ) (V/µs)

0.0025

Rail-to-rail

In, Out

Iq per channel (typ) (mA)

0.00098

CMRR (typ) (dB)

120

Rating

Catalog

Operating temperature range (°C)

-40 to 125

Iout (typ) (A)

0.0000002

Architecture

Bipolar

Input common mode headroom (to negative supply) (typ) (V)

-0.1

Input common mode headroom (to positive supply) (typ) (V)

5

Output swing headroom (to negative supply) (typ) (V)

0.09

Output swing headroom (to positive supply) (typ) (V)

-0.02

SOT-23 (DBV)

5

8.12 mm² (2.9 mm × 2.8 mm)

Micro-power operation: 1.2 µA (maximum)
Low input offset voltage: 550 µV (maximum)
Reverse battery protection up to 18 V
Rail-to-rail input/output
Gain bandwidth product: 5.5 kHz
Specified temperature range:
T_A = –40°C to +125°C
Operating temperature range:
T_A = –55°C to +125°C
Input common-mode range exceeds the rails:
–0.1 V to V_CC + 5 V
Supply voltage range: 2.5 V to 16 V
Small package:
- 5-pin SOT-23

Micro-power operation: 1.2 µA (maximum)
Low input offset voltage: 550 µV (maximum)
Reverse battery protection up to 18 V
Rail-to-rail input/output
Gain bandwidth product: 5.5 kHz
Specified temperature range:
T_A = –40°C to +125°C
Operating temperature range:
T_A = –55°C to +125°C
Input common-mode range exceeds the rails:
–0.1 V to V_CC + 5 V
Supply voltage range: 2.5 V to 16 V
Small package:
- 5-pin SOT-23

The TLV6003 is a nanopower operational amplifier consuming only 980 nA per channel, while offering very low maximum offset. Reverse battery protection guards the amplifier from an overcurrent condition due to improper battery installation. For harsh environments, the inputs can be taken 5 V greater than the positive supply rail without damage to the device.

The low supply current is coupled with a low input bias current, enabling the device to be used with high series resistance input sources, such as PIR motion detectors and carbon monoxide sensors. DC accuracy is maintained with a low max offset voltage of 550 µV (25°C), a typical CMRR of 120 dB, and a minimum open-loop gain of 112 dB at 2.7 V.

The maximum operating supply voltage is specified from 2.5 V to 16 V, with electrical characteristics specified at 2.7 V, 5 V, and 15 V. The 2.5-V operation makes this device compatible with Li-Ion battery-powered systems, making the TLV6003 a good choice for input signal gain and buffering into low-power microcontrollers, such as TI’s MSP430.

The TLV6003 is available in a small SOT-23 package.

The TLV6003 is a nanopower operational amplifier consuming only 980 nA per channel, while offering very low maximum offset. Reverse battery protection guards the amplifier from an overcurrent condition due to improper battery installation. For harsh environments, the inputs can be taken 5 V greater than the positive supply rail without damage to the device.

The low supply current is coupled with a low input bias current, enabling the device to be used with high series resistance input sources, such as PIR motion detectors and carbon monoxide sensors. DC accuracy is maintained with a low max offset voltage of 550 µV (25°C), a typical CMRR of 120 dB, and a minimum open-loop gain of 112 dB at 2.7 V.

The maximum operating supply voltage is specified from 2.5 V to 16 V, with electrical characteristics specified at 2.7 V, 5 V, and 15 V. The 2.5-V operation makes this device compatible with Li-Ion battery-powered systems, making the TLV6003 a good choice for input signal gain and buffering into low-power microcontrollers, such as TI’s MSP430.

The TLV6003 is available in a small SOT-23 package.

filter

Buscar otro/a Amplificadores operacionales de precisión (Vos <1 mV)

Descargar Ver vídeo con transcripción Video

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.

Ver todo 1

Documentación principal	Tipo	Título	Opciones de formato	Descargar la versión más reciente en inglés		Fecha
*	Hoja de datos	TLV6003 980-nA, 16-V, Precision, Rail-to-Rail Input and Output, Operational Amplifier datasheet	PDF \| HTML		11/10/2019

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

AMP-PDK-EVM — Módulo de evaluación del kit de desarrollo del rendimiento del amplificador

El kit de desarrollo del rendimiento (PDK) del amplificador es un kit de módulo de evaluación (EVM) para probar los parámetros comunes del amplificador operacional y es compatible con la mayoría de los amplificadores operacionales y comparadores. El kit de EVM ofrece una placa principal con varias (...)

Guía del usuario: PDF | HTML