TMP1826

ACTIVO

EEPROM de 2 Kbit con sensor de temperatura integrado de ±0.2 °C, compatible con el protocolo 1-Wire®

Detalles del producto

Local sensor accuracy (max) 0.2, 0.3 Type Local Operating temperature range (°C) -55 to 150 Interface type Single-Wire Features 2-kb EEPROM, 64-bit unique ID, ALERT, GPIO, NIST traceable Supply current (max) (µA) 154 Temp resolution (max) (bps) 16 Remote channels (#) 0 Addresses 256 Rating Catalog TI functional safety category Functional Safety-Capable
Local sensor accuracy (max) 0.2, 0.3 Type Local Operating temperature range (°C) -55 to 150 Interface type Single-Wire Features 2-kb EEPROM, 64-bit unique ID, ALERT, GPIO, NIST traceable Supply current (max) (µA) 154 Temp resolution (max) (bps) 16 Remote channels (#) 0 Addresses 256 Rating Catalog TI functional safety category Functional Safety-Capable
WSON (NGR) 8 6.25 mm² (2.5 mm × 2.5 mm) VSSOP (DGK) 8 14.7 mm² (3 mm × 4.9 mm)
  • 1-Wire interface with multi-drop shared bus and cyclic redundancy check (CRC)
  • Bus powered with operating voltage: 1.7V to 5.5V
  • IEC 61000-4-2 ESD for 8-kV contact discharge
  • Functional Safety-Capable
  • High-accuracy digital temperature sensor (WSON package)
    • ±0.2°C (maximum) from +10°C to +45°C
    • ±0.3°C (maximum) from –40°C to +105°C
    • ±0.4°C (maximum) from –55°C to +150°C
  • High-accuracy digital temperature sensor (VSSOP package)
    • ±0.3°C (maximum) from –20°C to +85°C
    • ±0.5°C (maximum) from –55°C to +150°C
  • Temperature measurement current: 94µA
  • Shutdown current: 1.3µA
  • 16-bit temperature resolution: 7.8125 m°C (1 LSB)
  • Fast data rates of 90kbps in overdrive speed
  • Flexible user programmable short address modes for faster device address
  • 2Kb EEPROM features:
    • Write operation in 64-bit block size
    • Continuous read mode
    • Read with write protection with 256-bit page size
    • Programming current: 178µA
  • NIST traceable factory-programmed non erasable 64-bit identification number for device addressing
  • Four configurable open-drain digital input-output and temperature alert
  • 1-Wire interface with multi-drop shared bus and cyclic redundancy check (CRC)
  • Bus powered with operating voltage: 1.7V to 5.5V
  • IEC 61000-4-2 ESD for 8-kV contact discharge
  • Functional Safety-Capable
  • High-accuracy digital temperature sensor (WSON package)
    • ±0.2°C (maximum) from +10°C to +45°C
    • ±0.3°C (maximum) from –40°C to +105°C
    • ±0.4°C (maximum) from –55°C to +150°C
  • High-accuracy digital temperature sensor (VSSOP package)
    • ±0.3°C (maximum) from –20°C to +85°C
    • ±0.5°C (maximum) from –55°C to +150°C
  • Temperature measurement current: 94µA
  • Shutdown current: 1.3µA
  • 16-bit temperature resolution: 7.8125 m°C (1 LSB)
  • Fast data rates of 90kbps in overdrive speed
  • Flexible user programmable short address modes for faster device address
  • 2Kb EEPROM features:
    • Write operation in 64-bit block size
    • Continuous read mode
    • Read with write protection with 256-bit page size
    • Programming current: 178µA
  • NIST traceable factory-programmed non erasable 64-bit identification number for device addressing
  • Four configurable open-drain digital input-output and temperature alert

The TMP1826 is a high-accuracy, 1-Wire® compatible digital output temperature sensor with integrated 2Kb EEPROM and a wide operating temperature range from –55°C to +150°C. The TMP1826 provides a high accuracy of ±0.1°C (typical)/±0.2°C (maximum) across the temperature range of +10°C to +45°C. Each device comes with a factory programmed 64-bit unique identification number for addressing and NIST traceability. The TMP1826 supports both standard speed for legacy application and overdrive mode with 90-kbps data rate for low latency communication across a wide voltage range of 1.7V to 5.5V.

In the simplest mode of operation, the TMP1826 1-Wire® interface, with an integrated 8kV IEC-61000-4-2 ESD protection on the data pin, requires only a single connection and a ground return in bus powered mode, which simplifies and reduces cost by reducing the number of wires and external protection components. Additionally, there is the VDD power pin also available for applications that need to have a dedicated power supply.

1-Wire® is a registered trademark of Maxim Integrated Products, Inc.

The TMP1826 is a high-accuracy, 1-Wire® compatible digital output temperature sensor with integrated 2Kb EEPROM and a wide operating temperature range from –55°C to +150°C. The TMP1826 provides a high accuracy of ±0.1°C (typical)/±0.2°C (maximum) across the temperature range of +10°C to +45°C. Each device comes with a factory programmed 64-bit unique identification number for addressing and NIST traceability. The TMP1826 supports both standard speed for legacy application and overdrive mode with 90-kbps data rate for low latency communication across a wide voltage range of 1.7V to 5.5V.

In the simplest mode of operation, the TMP1826 1-Wire® interface, with an integrated 8kV IEC-61000-4-2 ESD protection on the data pin, requires only a single connection and a ground return in bus powered mode, which simplifies and reduces cost by reducing the number of wires and external protection components. Additionally, there is the VDD power pin also available for applications that need to have a dedicated power supply.

1-Wire® is a registered trademark of Maxim Integrated Products, Inc.

Descargar Ver vídeo con transcripción Video

Solicitar más información

La documentación de calibración según el Instituto Nacional de Estándares y Tecnología (NIST) está disponible. Solicitar ahora

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Pin por pin con la misma funcionalidad que el dispositivo comparado
TMP1827 ACTIVO Autenticador SHA-256 y EEPROM de 2 Kbit, sensor de temperatura integrado de ±0.2 °C compatible con e Pin-to-pin, same accuracy temperature sensor, with 2-kbit EEPROM and SHA-256-HMAC authentication
Funcionalidad similar a la del dispositivo comparado
TMP107 ACTIVO Sensor de temperatura de ±0.4 °C con UART de cadena en margarita, EEPROM y función de alerta UART daisy chain with 0.4°C accuracy
TMP117 ACTIVO Sensor de temperatura digital de 0.1 °C, EEPROM de 48 bits, sustitución de RTD PT100/PT1000 I²C bus with 0.1°C accuracy
LMT01 ACTIVO Sensor de temperatura de 0.5 °C de precisión de 2 pines con interfaz de tren de pulsos Pulse train, two-pin through hole or surface mount with 0.5°C accuracy

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 13
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos TMP1826 2-Kbit EEPROM, With Integrated ±0.2°C Temperature Sensor, Compatible With 1-Wire® Protocol datasheet (Rev. D) PDF | HTML 17/01/2025
Nota sobre la aplicación A Simple, Java-Based CRC Calculator PDF | HTML 4/03/2026
Información sobre seguridad funcional TMP1826 Functional Safety FIT Rate, FMD and Pin FMA (Rev. B) PDF | HTML 18/07/2025
Product overview NIST Traceability for Temperature and Humidity Sensors PDF | HTML 15/04/2025
Nota sobre la aplicación How to Read and Interpret Digital Temperature Sensor Output Data (Rev. A) PDF | HTML 21/01/2025
Nota sobre la aplicación Implementing Enumeration for 1-Wire® Protocol with TMP1826 and TM4C129x Microcontrollers (Rev. E) PDF | HTML 21/01/2025
Application brief Replace External Memory for Module Identification With TMP1826 Embedded EEPROM (Rev. A) PDF | HTML 21/01/2025
Nota sobre la aplicación Implementing Host Controller for TMP1826 & TMP1827 Single-Wire Temp. Sensor PDF | HTML 3/11/2022
Artículo técnico 3 tips to optimize data reliability with sensors in real-time control systems PDF | HTML 9/08/2022
Nota sobre la aplicación RTD Alternative Measurement Methods in Real-Time Control Applications (Rev. A) PDF | HTML 17/06/2022
Artículo técnico How accurate sensing in HVAC systems improves efficiency and saves consumers money PDF | HTML 26/01/2021
Artículo técnico Interface to sensors in seconds with ASC Studio PDF | HTML 12/11/2020
Artículo técnico Getting the most out of your power stage at the full temperature range – part 2 PDF | HTML 12/09/2019

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

TMP1827EVM — Módulo de evaluación TMP1827 para sensor de temperatura digital de cable único

El TMP1827 es un sensor de temperatura de salida digital compatible con cable único de alta precisión con un algoritmo de hash seguro (SHA) integrado de 256 bits con código de autenticación de mensajes hash (HMAC) y EEPROM de 2 Kbit. El TMP1827 proporciona una alta precisión de ±0.3 °C en todo el (...)

Guía del usuario: PDF | HTML
Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
WSON (NGR) 8 Ultra Librarian
VSSOP (DGK) 8 Ultra Librarian

Pedidos y calidad

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Serie de videos

Ver todos los videos

Videos