TPS62869

Name: TPS62869
Brand: TI
SKU: TPS62869
Price: 1.028 USD

ACTIVO

Convertidor reductor síncrono de 5.5 V y 4 A con interfaz I2C en encapsulado QFN de 1.5 mm × 2.5 mm

Haga su pedido ahora

Hoja de datos

document-pdfAcrobat TPS62868x 2.4-V to 5.5-V Input, 4-A/6-A Synchronous Step-Down Converter with I2C Interface in QFN Package datasheet (Rev. B) (Inglés) PDF | HTML

TPS62869

ACTIVO

Hoja de datos

Haga su pedido ahora

Detalles del producto

Rating

Catalog

Topology

Buck, Step-Down Converter, Synchronous Buck

Iout (max) (A)

6

Vin (max) (V)

5.5

Vin (min) (V)

2.4

Vout (max) (V)

3.35

Vout (min) (V)

0.2

Features

Adaptive/Dynamic Voltage Scaling, Enable, Forced PWM, I2C/PMBus, Light Load Efficiency, Light load efficiency, Output discharge, Over Current Protection, Power good, Soft Start Fixed, Synchronous Rectification, UVLO Fixed, UVLO fixed, VID Interface

EMI features

Low parasitic Hotrod packaging

Control mode

COT, Constant on-time (COT), DCS-Control

Switching frequency (min) (kHz)

2400

Switching frequency (max) (kHz)

2400

Operating temperature range (°C)

-40 to 125

Iq (typ) (µA)

4

Duty cycle (max) (%)

100

Type

Converter, Converter (Integrated Switch), DC/DC converter

Rating

Catalog

Topology

Buck, Step-Down Converter, Synchronous Buck

Iout (max) (A)

6

Vin (max) (V)

5.5

Vin (min) (V)

2.4

Vout (max) (V)

3.35

Vout (min) (V)

0.2

Features

Adaptive/Dynamic Voltage Scaling, Enable, Forced PWM, I2C/PMBus, Light Load Efficiency, Light load efficiency, Output discharge, Over Current Protection, Power good, Soft Start Fixed, Synchronous Rectification, UVLO Fixed, UVLO fixed, VID Interface

EMI features

Low parasitic Hotrod packaging

Control mode

COT, Constant on-time (COT), DCS-Control

Switching frequency (min) (kHz)

2400

Switching frequency (max) (kHz)

2400

Operating temperature range (°C)

-40 to 125

Iq (typ) (µA)

4

Duty cycle (max) (%)

100

Type

Converter, Converter (Integrated Switch), DC/DC converter

VQFN-HR (RQY)

9

3.75 mm² 2.5 x 1.5

11-mΩ and 10.5-mΩ internal power MOSFETs
>90% efficiency (0.9-V output)
DCS-Control topology for fast transient response
Available output voltage ranges for dynamic voltage scaling (DVS) through I²C
- Output voltage range from 0.2-V to 0.8375-V with 2.5-mV step size
- Output voltage range from 0.4-V to 1.675-V with 5-mV step size
- Output voltage range from 0.8-V to 3.35-V with 10-mV step size
1% output voltage accuracy
2.4-MHz switching frequency
Selection by external resistor
- Start-up output voltage
- I²C target address
Selection by I²C interface
- Power save mode or forced PWM mode
- Output discharge
- Hiccup or latching short-circuit protection
- Output voltage ramp speed
Thermal pre-warning and thermal shutdown
Power good indicator pin option with window comparator
I²C-compatible interface up to 3.4 Mbps
Available in 1.5-mm x 2.5-mm x 1.0-mm 9-pin QFN package with 0.5-mm pitch
Also available in WCSP package: TPS62866, 6-A synchronous step-down converter with I2C interface in 1.05-mm x 1.78-mm WCSP package
Create a custom design using with TPS62868/9 with the WEBENCH Power Designer

11-mΩ and 10.5-mΩ internal power MOSFETs
>90% efficiency (0.9-V output)
DCS-Control topology for fast transient response
Available output voltage ranges for dynamic voltage scaling (DVS) through I²C
- Output voltage range from 0.2-V to 0.8375-V with 2.5-mV step size
- Output voltage range from 0.4-V to 1.675-V with 5-mV step size
- Output voltage range from 0.8-V to 3.35-V with 10-mV step size
1% output voltage accuracy
2.4-MHz switching frequency
Selection by external resistor
- Start-up output voltage
- I²C target address
Selection by I²C interface
- Power save mode or forced PWM mode
- Output discharge
- Hiccup or latching short-circuit protection
- Output voltage ramp speed
Thermal pre-warning and thermal shutdown
Power good indicator pin option with window comparator
I²C-compatible interface up to 3.4 Mbps
Available in 1.5-mm x 2.5-mm x 1.0-mm 9-pin QFN package with 0.5-mm pitch
Also available in WCSP package: TPS62866, 6-A synchronous step-down converter with I2C interface in 1.05-mm x 1.78-mm WCSP package
Create a custom design using with TPS62868/9 with the WEBENCH Power Designer

The TPS62868 and TPS62869 devices are high-frequency synchronous step-down converters with I²C interface which provide an efficient, adaptive, and high power-density solution. At medium to heavy loads, the converter operates in PWM mode and automatically enters Power Save Mode operation at light load to maintain high efficiency over the entire load current range. The device can also be forced in PWM mode operation for smallest output voltage ripple. Together with its DCS-Control architecture, excellent load transient performance and tight output voltage accuracy are achieved. Through the I²C interface and a dedicated VID pin, the output voltage is quickly adjusted to adapt the power consumption of the load to the ever-changing performance needs of the application.

filter

Buscar otro/a Convertidores de CA/CC y CC/CC (FET integrado)

Descargar Ver vídeo con transcripción Video

Solicitar muestras

Las muestras de preproducción se encuentran disponibles (XPS628691ARQYR). Solicitar ahora

Productos similares que pueden interesarle

open-in-new

Comparar alternativas

Pin por pin con la misma funcionalidad que el dispositivo comparado

TPS62868

ACTIVO

Convertidor reductor síncrono de 5.5 V y 4 A con interfaz I2C en encapsulado QFN de 1.5 mm × 2.5 mm Lower output current alternative.

Funcionalidad similar a la del dispositivo comparado

TPS54678

ACTIVO

Convertidor SWIFT™ sincrónico reductor 2.95 a 6V de entrada y 6A con límite corriente intermitente Previous generation device with I2C interface.

TPS62480

ACTIVO

Convertidor reductor síncrono con entrada de 2.4 V a 5.5 V, 6 A y salida PG ajustable Inicio suave y Previous generation device with dual phase.

TPSM82866A

ACTIVO

Módulo de potencia reductor de 6 A y entrada de 2.4 V a 5.5 V con inductor integrado DC/DC module alternative in overmolded QFN.

Documentación técnica

star

=Principal documentación para este producto seleccionada por TI

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.

Ver todo 10

	Tipo	Título		Fecha
*	Data sheet	TPS62868x 2.4-V to 5.5-V Input, 4-A/6-A Synchronous Step-Down Converter with I2C Interface in QFN Package datasheet (Rev. B)	PDF \| HTML	12 jul 2021
	Application note	Closed Loop Constant Power Drive to Simplify Heater Element Control and Extend Battery Life	PDF \| HTML	29 ene 2025
	Application note	Benefiting from Step-Down Converters with an I2C Communication Interface (Rev. B)	PDF \| HTML	29 nov 2023
	Application note	Intro to Multi-Function Pins and Their Applications in TI Step-Down Converters (Rev. A)	PDF \| HTML	17 nov 2022
	Application note	Understanding SOA Curves to Operate at High Output Currents and Temperature	PDF \| HTML	05 may 2022
	User guide	TPS62869EVM-118 Evaluation Module (Rev. B)	PDF \| HTML	05 nov 2021
	White paper	Enabling Higher Data Rates for Optical Modules With Small and Efficient Power		22 mar 2021
	Application note	Thermal Performance Optimization of High Power Density Buck Converters	PDF \| HTML	23 feb 2021
	Certificate	TPS62869EVM-118 EU Declaration of Conformity (DoC)		21 jul 2020
	Technical article	Advantages of scalability: from Peter Parker to pin-strapping	PDF \| HTML	30 abr 2020

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

TPS628690EVM-135 — Módulo de evaluación TPS62869 de convertidor reductor con entrada de 5.5 V, salida de 6 A y precisió

El EVM TPS628690EVM-135 facilita la evaluación del TPS62869, un convertidor reductor de 6 A con DCS-Control en una solución de encapsulado QFN pequeño de 1.5 mm por 2.5 mm. El EVM crea tensiones de salida de entre 0.2 V y 0.8375 V con una precisión del 1 % a partir de tensiones de entrada (...)

Guía del usuario: PDF | HTML

View Options

Placa de evaluación

TPS62869EVM-118 — Módulo de evaluación de convertidor reductor de alta densidad de potencia de 6 A con interfaz I2C

El módulo de evaluación (EVM) TPS62869EVM-x (BSR118) facilita la evaluación de la familia de convertidores reductores de 6 A con DCS-Control TPS62869 en una solución de encapsulado QFN pequeño de 1.5 mm por 2.5 mm. El EVM crea tensiones de salida entre 0.4 V y 1.675 V con tensiones de salida de (...)

Guía del usuario: PDF | HTML

View Options

Modelo de simulación