Inicio Administración de potencia Reguladores de conmutación CA/CC Controladores de CA/CC

TPS7H5006-SEP

ACTIVO

Radiation-tolerant, 2MHz PWM controller with synchronous rectification and dead-time setting

Detalles del producto

Topology Active clamp, Boost, Buck, Flyback, Forward Control mode Peak current mode Features Dead time control, Leading edge blanking, Multi-topology Duty cycle (max) (%) 100
Topology Active clamp, Boost, Buck, Flyback, Forward Control mode Peak current mode Features Dead time control, Leading edge blanking, Multi-topology Duty cycle (max) (%) 100
TSSOP (PW) 24 49.92 mm² (7.8 mm × 6.4 mm)
  • Radiation hardened:
    • SEL, SEB, and SEGR immune to LET = 43 MeV-cm2/mg
    • SET and SEFI characterized up to LET = 43 MeV-cm2/mg
    • TID assured for every wafer lot up to 50 krad(Si)
  • Input voltage: 4 V to 14 V
  • 0.613-V +0.7%/–1% voltage reference over temperature, radiation, and line and load regulation
  • Switching frequency from 100 kHz to 2 MHz
  • External clock synchronization capability
  • Synchronous rectification outputs
    • TPS7H5005-SEP, TPS7H5006-SEP, TPS7H5007-SEP
  • Adjustable dead time
    • TPS7H5005-SEP, TPS7H5006-SEP
  • Adjustable leading edge blank time
    • TPS7H5005-SEP, TPS7H5006-SEP, TPS7H5008-SEP
  • Configurable duty cycle limit
    • TPS7H5005-SEP, TPS7H5006-SEP, TPS7H5007-SEP
  • Adjustable slope compensation and soft start
  • 24-pin TSSOP package
  • Space Enhanced Plastic
    • Controlled baseline
    • Au bondwire and NiPdAu lead finish
    • Meets NASA ASTM E595 outgassing specification
    • One fabrication, assembly, and test site
    • Extended product life cycle
    • Extended product change notification
    • Product traceability
  • Radiation hardened:
    • SEL, SEB, and SEGR immune to LET = 43 MeV-cm2/mg
    • SET and SEFI characterized up to LET = 43 MeV-cm2/mg
    • TID assured for every wafer lot up to 50 krad(Si)
  • Input voltage: 4 V to 14 V
  • 0.613-V +0.7%/–1% voltage reference over temperature, radiation, and line and load regulation
  • Switching frequency from 100 kHz to 2 MHz
  • External clock synchronization capability
  • Synchronous rectification outputs
    • TPS7H5005-SEP, TPS7H5006-SEP, TPS7H5007-SEP
  • Adjustable dead time
    • TPS7H5005-SEP, TPS7H5006-SEP
  • Adjustable leading edge blank time
    • TPS7H5005-SEP, TPS7H5006-SEP, TPS7H5008-SEP
  • Configurable duty cycle limit
    • TPS7H5005-SEP, TPS7H5006-SEP, TPS7H5007-SEP
  • Adjustable slope compensation and soft start
  • 24-pin TSSOP package
  • Space Enhanced Plastic
    • Controlled baseline
    • Au bondwire and NiPdAu lead finish
    • Meets NASA ASTM E595 outgassing specification
    • One fabrication, assembly, and test site
    • Extended product life cycle
    • Extended product change notification
    • Product traceability

The TPS7H500x-SEP series (consisting of TPS7H5005-SEP, TPS7H5006-SEP, TPS7H5007-SEP, and TPS7H5008-SEP) is a family of high-speed, radiation-tolerant, PWM controllers in space enhanced plastic. The controllers provide a number of features that are beneficial for the design of DC-DC converter topologies intended for space applications. The controllers have a 0.613-V +0.7%/–1% accurate internal reference and configurable switching frequency up to 2 MHz. Each device offers programmable slope compensation and soft-start.

The TPS7H500x-SEP series can be driven using an external clock through the SYNC pin or by using the internal oscillator at a frequency programmed by the user. The controller family offers the user various options for switching outputs, synchronous rectification capability, dead time (fixed or configurable), leading edge blank time (fixed or configurable), and duty cycle limit. Each device in the TPS7H500x-SEP series has a 24-pin TSSOP package.

The TPS7H500x-SEP series (consisting of TPS7H5005-SEP, TPS7H5006-SEP, TPS7H5007-SEP, and TPS7H5008-SEP) is a family of high-speed, radiation-tolerant, PWM controllers in space enhanced plastic. The controllers provide a number of features that are beneficial for the design of DC-DC converter topologies intended for space applications. The controllers have a 0.613-V +0.7%/–1% accurate internal reference and configurable switching frequency up to 2 MHz. Each device offers programmable slope compensation and soft-start.

The TPS7H500x-SEP series can be driven using an external clock through the SYNC pin or by using the internal oscillator at a frequency programmed by the user. The controller family offers the user various options for switching outputs, synchronous rectification capability, dead time (fixed or configurable), leading edge blank time (fixed or configurable), and duty cycle limit. Each device in the TPS7H500x-SEP series has a 24-pin TSSOP package.

Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Funcionalidad similar a la del dispositivo comparado
TPS7H5002-SP ACTIVO Radiation-hardened, QML-P and QML-V, 2MHz PWM with synchronous rectification and dead-time setting QML-qualified higher-radiation PWM controller family for GEO missions

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 13
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos TPS7H500x-SEP Radiation-Tolerant 2-MHz Current Mode PWM Controllers in Space Enhanced Plastic datasheet (Rev. A) PDF | HTML 1/09/2022
* Informe de radiación y confiabilidad TPS7H5006-SEP and TPS7H5002-SP QMLP Neutron Displacement Damage (NDD) Characterization Report (Rev. A) 15/08/2024
* Informe de radiación y confiabilidad TPS7H500x-SEP Production Flow and Reliability Report PDF | HTML 11/08/2022
* Informe de radiación y confiabilidad TPS7H5006-SEP Total Ionizing Dose (TID) (Rev. A) 7/07/2022
* Informe de radiación y confiabilidad Single Event Effects Report of the TPS7H500X-SEP Dual-Output PWM Controller 25/04/2022
* VID TPS7H5006-SEP VID V62-22607 29/08/2022
Guía de selección TI Space Products (Rev. L) 27/03/2026
Artículo técnico How can you optimize SWaP for next-generation satellites with electrical power systems (Rev. A) PDF | HTML 19/02/2025
Artículo técnico How Space Enhanced Products Address Challenges in low Earth orbit Applications (Rev. A) PDF | HTML 18/12/2023
Artículo técnico Key considerations for advancing satellite electrical power systems PDF | HTML 31/10/2022
Nota sobre la aplicación Reduce the Risk in Low-Earth Orbit Missions with Space Enhanced Plastic Products (Rev. A) PDF | HTML 15/09/2022
Certificado TPS7H5006EVM EU RoHS Declaration of Conformity (DoC) 8/02/2022
Libro electrónico Radiation Handbook for Electronics (Rev. A) 21/05/2019

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

TPS7H5006EVM — Módulo de evaluación TPS7H5006 para controlador PWM de 2 MHz con rectificación síncrona y tiempo mue

El módulo de evaluación (EVM) TPS7H5006 demuestra cómo puede funcionar el controlador TPS7H5006-SEP en bucle abierto y proporciona una plataforma de pruebas para utilizar el producto.

Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
Placa de evaluación

ALPHA-3P-VB630-SPACE-AMD — El kit Alpha Data ADM-VB630 con AMD Versal edge XQRVE2302 ACAP y productos de TI tolerantes a la rad

Se trata de un factor de forma VPX 3U que destaca el SoC/FPGA adaptable AMD-Xilinx® Versal AI Edge XQRVE2302. El ADM-VB630 es una placa de computadoras de una sola placa. La mayoría de los componentes son una gama de alimentación, interfaz, reloj y procesamiento integrado (-SEP) de administración (...)

Productos y hardware compatibles
Modelo de simulación

TPS7H500x PSpice Transient Model

SLVMEI2.ZIP (196 KB) - Modelo PSpice
Productos y hardware compatibles
Modelo de simulación

TPS7H500x SIMPLIS Model (Rev. A)

SLVMEM9A.ZIP (214 KB) - Modelo SIMPLIS
Productos y hardware compatibles
Herramienta de cálculo

SLVRBK3 — TPS7H5006-SEP Buck Converter Calculator

Productos y hardware compatibles
Herramienta de cálculo

SLVRBK4 — TPS7H5006-SEP Flyback Converter Calculator

Productos y hardware compatibles
Diseño de referencia

PMP23552 — Diseño de referencia de convertidor buck sincrónico de 50 a 150 VIN, 28 V y 12 A para un rango de ap

Este diseño de referencia es un convertidor buck sincrónico de 28 V de salida y 12 A para aplicaciones espaciales que funciona con un rango de entrada de 50 V a 150 V. Las aplicaciones principales incluyen la reducción de tensiones de paneles solares y buses de distribución de energía de 120 VCC. (...)
Productos y hardware compatibles
Diseño de referencia

TIDA-050088 — Diseño de referencia de potencia tolerante a la radiación para Versal AI Edge

Se trata de un diseño de referencia de arquitectura de potencia tolerante a la radiación para Versal™ AI Edge XQRVE2302 de AMD. El Versal Edge es un sistema en chip (SoC) adoptivo para aplicaciones espaciales que permite altos niveles de rendimiento en un factor de forma pequeño. Un suministro de (...)
Productos y hardware compatibles
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
TSSOP (PW) 24 Ultra Librarian

Pedidos y calidad

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Serie de videos

Ver todos los videos

Videos