Inicio Gestión de la energía DC/DC power modules Power modules (integrated inductor)
Inicio
Gestión de la energía
DC/DC power modules
Power modules (integrated inductor)

TPSM5D1806E

ACTIVO

Módulo de alimentación de salida, con entrada de 4.5 V a 15 V, doble de 6 A, simple de 12 A con temp

Haga su pedido ahora
Hoja de datos

TPSM5D1806E

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Iout (max) (A) 6 Vin (max) (V) 15 Vin (min) (V) 4.5 Vout (max) (V) 5.5 Vout (min) (V) 0.5 Rating Catalog Operating temperature range (°C) -55 to 125 Topology Synchronous Buck Features EMI Tested, Enable, Frequency synchronization, Overcurrent protection, Phase Interleaving, Power good, Remote Sense Control mode ACM Switching frequency (max) (Hz) 2000000 Switching frequency (min) (Hz) 500000
Iout (max) (A) 6 Vin (max) (V) 15 Vin (min) (V) 4.5 Vout (max) (V) 5.5 Vout (min) (V) 0.5 Rating Catalog Operating temperature range (°C) -55 to 125 Topology Synchronous Buck Features EMI Tested, Enable, Frequency synchronization, Overcurrent protection, Phase Interleaving, Power good, Remote Sense Control mode ACM Switching frequency (max) (Hz) 2000000 Switching frequency (min) (Hz) 500000
B0QFN (RDB) 51 44 mm² 8 x 5.5
  • Independent dual 6-A outputs
  • Parallel single 12-A output
  • Output voltage range: 0.5 V to 5.5 V
  • 0.5-V, ±1.25% voltage reference accuracy over temperature range
  • Frequency synchronization with phase delay
  • Independent enable and power good for each output
  • Start-up into pre-biased output
  • UV and OV power good
  • Selectable switching frequency options: 500 kHz, 1.0 MHz, 1.5 MHz, and 2.0 MHz
  • Meets EN55011 radiated EMI limits
  • Operating junction range: –55°C to +125°C
  • Operating ambient range: –55°C to +105°C
  • 8-mm × 5.5-mm × 1.8-mm standard QFN package
  • Create a custom design using the TPSM5D1806E with the WEBENCH Power Designer
  • Independent dual 6-A outputs
  • Parallel single 12-A output
  • Output voltage range: 0.5 V to 5.5 V
  • 0.5-V, ±1.25% voltage reference accuracy over temperature range
  • Frequency synchronization with phase delay
  • Independent enable and power good for each output
  • Start-up into pre-biased output
  • UV and OV power good
  • Selectable switching frequency options: 500 kHz, 1.0 MHz, 1.5 MHz, and 2.0 MHz
  • Meets EN55011 radiated EMI limits
  • Operating junction range: –55°C to +125°C
  • Operating ambient range: –55°C to +105°C
  • 8-mm × 5.5-mm × 1.8-mm standard QFN package
  • Create a custom design using the TPSM5D1806E with the WEBENCH Power Designer

The TPSM5D1806E dual 6-A output power module is a highly integrated and flexible DC-DC power supply packaged in a compact 8-mm × 5.5-mm × 1.8-mm QFN package. The input voltage range of 4.5 V to 15 V allows conversion from a wide intermediate bus as well as standard 5-V and 12-V rails. The two 6-A outputs can be configured independently for two separate power rails or combined for a single 2-phase, 12-A output.

The low-profile, 51-pin QFN package with optimal package layout enhances thermal performance. The enhanced temperature performance of –55°C enables aerospace applications in environments such as outside cabin-mounted modules or flight control units. The package footprint has all signal pins accessible from the perimeter and large thermal pads beneath the device for simple layout and easy handling in manufacturing.

The integrated power design eliminates the loop compensation and magnetics part selection from the design process. The device offers independent enable control and power-good signal for each output. Switching frequency and phase offsetting can be configured using pin-strapping. The device also offers overcurrent and thermal shutdown protection.

The TPSM5D1806E dual 6-A output power module is a highly integrated and flexible DC-DC power supply packaged in a compact 8-mm × 5.5-mm × 1.8-mm QFN package. The input voltage range of 4.5 V to 15 V allows conversion from a wide intermediate bus as well as standard 5-V and 12-V rails. The two 6-A outputs can be configured independently for two separate power rails or combined for a single 2-phase, 12-A output.

The low-profile, 51-pin QFN package with optimal package layout enhances thermal performance. The enhanced temperature performance of –55°C enables aerospace applications in environments such as outside cabin-mounted modules or flight control units. The package footprint has all signal pins accessible from the perimeter and large thermal pads beneath the device for simple layout and easy handling in manufacturing.

The integrated power design eliminates the loop compensation and magnetics part selection from the design process. The device offers independent enable control and power-good signal for each output. Switching frequency and phase offsetting can be configured using pin-strapping. The device also offers overcurrent and thermal shutdown protection.
open-in-new Buscar otro/a Power modules (integrated inductor)
Descargar Ver vídeo con transcripción Video

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 2
Tipo Título Fecha
* Data sheet TPSM5D1806E 4.5-V to 15-V Input, Dual 6-A / Single 12-A Output Power Module with –55°C to +125°C Range datasheet PDF | HTML 13 ene 2022
Application note Extended Temperature DC/DC Switching Regulator Solutions PDF | HTML 12 ene 2021

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

TPSM5D1806EVM — Placa de evaluación de módulo de alimentación de salidas de 6 A, entrada de 4.5 V a 15 V y salida do

The TPSM5D1806EVM evaluation module (EVM) is configured to evaluate the operation of the TPSM5D1806 power module as two 6-A outputs or as a combined 12-A single ouptut. The input voltage range is 4.5 V to 15 V. The output voltage range is 0.5 V to 5.5 V. The evaluation board makes it easy to (...)

Guía del usuario: PDF | HTML
No disponible en TI.com
Paquete Pasadores Descargar
B0QFN (RDB) 51 Ver opciones
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos