TPSM82822

Name: TPSM82822
Brand: TI
SKU: TPSM82822
Price: 1.23 USD

ACTIVO

Módulo reductor de 2 A con entrada de 5.5 V con inductor integrado en μSIP de 2 × 2.5 × 1.1 m

Haga su pedido ahora

Hoja de datos

document-pdfAcrobat TPSM8282x, TPSM8282xA 1-A, 2-A, and 3-A High Efficiency Step-Down Converter MicroSiP™ Power Module with Integrated Inductor datasheet (Rev. F) (Inglés) PDF | HTML

TPSM82822

ACTIVO

Hoja de datos

Haga su pedido ahora

Detalles del producto

Rating

Catalog

Topology

Buck, Step-Down Converter, Synchronous Buck

Iout (max) (A)

2

Vin (max) (V)

5.5

Vin (min) (V)

2.4

Vout (max) (V)

4

Vout (min) (V)

0.6

Features

EMI Tested, Enable, Light Load Efficiency, Output discharge, Power good

Operating temperature range (°C)

-40 to 125

Type

Converter, Converter (Integrated Switch), DC/DC converter, Module

Duty cycle (max) (%)

100

Control mode

COT, Constant on-time (COT), DCS-Control

Switching frequency (min) (kHz)

4000

Switching frequency (max) (kHz)

4000

Rating

Catalog

Topology

Buck, Step-Down Converter, Synchronous Buck

Iout (max) (A)

2

Vin (max) (V)

5.5

Vin (min) (V)

2.4

Vout (max) (V)

4

Vout (min) (V)

0.6

Features

EMI Tested, Enable, Light Load Efficiency, Output discharge, Power good

Operating temperature range (°C)

-40 to 125

Type

Converter, Converter (Integrated Switch), DC/DC converter, Module

Duty cycle (max) (%)

100

Control mode

COT, Constant on-time (COT), DCS-Control

Switching frequency (min) (kHz)

4000

Switching frequency (max) (kHz)

4000

USIP (SIL)

10

See data sheet

1.1-mm profile MicroSiP™ power module
CISPR 11 class B compliant
Up to 95% efficiency
2.4-V to 5.5-V input voltage range
0.6-V to 4-V adjustable output voltage
Fixed output voltages available: 1.2-V, 1.8-V, 2.5-V and 3.3-V
4-µA operating quiescent current
DCS-control topology
Power save mode option available for light load efficiency
Forced-PWM option available for CCM operation
100% duty cycle for lowest dropout
Hiccup short circuit protection
Output discharge
Power good output with window comparator
Integrated soft start-up
Overtemperature protection
PSPICE models available for: TPSM82821, TPSM82822 and TPSM82823
2.0-mm × 2.5-mm × 1.1-mm 10-pin µSiL package
12 mm² total solution size (for the fixed output voltage versions)

1.1-mm profile MicroSiP™ power module
CISPR 11 class B compliant
Up to 95% efficiency
2.4-V to 5.5-V input voltage range
0.6-V to 4-V adjustable output voltage
Fixed output voltages available: 1.2-V, 1.8-V, 2.5-V and 3.3-V
4-µA operating quiescent current
DCS-control topology
Power save mode option available for light load efficiency
Forced-PWM option available for CCM operation
100% duty cycle for lowest dropout
Hiccup short circuit protection
Output discharge
Power good output with window comparator
Integrated soft start-up
Overtemperature protection
PSPICE models available for: TPSM82821, TPSM82822 and TPSM82823
2.0-mm × 2.5-mm × 1.1-mm 10-pin µSiL package
12 mm² total solution size (for the fixed output voltage versions)

The TPSM8282x device family consists of a 1-A, 2-A, and 3-A step-down converter MicroSiP™ power modules optimized for small solution size and high efficiency.

The power modules integrate a synchronous step-down converter and an inductor to simplify design, reduce external components and save PCB area. The TPSM8282x is available in two flavors. The first includes an automatically entered power save mode to maintain high efficiency down to very light loads for extending the system battery run-time. The second version, the TPSM8282xA, runs in forced-PWM maintaining a continuous conduction mode at all currents to minimize the output ripple. In PWM mode the converter operates with a nominal switching frequency of 4MHz.

In power save mode, the device operates with typically 4-µA quiescent current. Using the DCS-Control topology, the device achieves excellent load transient performance and accurate output voltage regulation. The EN and PG pins, which support sequencing configurations, bring a flexible system design. An integrated soft start-up reduces the inrush current required from the input supply. Overtemperature protection and hiccup short circuit protection deliver a robust and reliable solution.

The TPSM8282x device family consists of a 1-A, 2-A, and 3-A step-down converter MicroSiP™ power modules optimized for small solution size and high efficiency.

The power modules integrate a synchronous step-down converter and an inductor to simplify design, reduce external components and save PCB area. The TPSM8282x is available in two flavors. The first includes an automatically entered power save mode to maintain high efficiency down to very light loads for extending the system battery run-time. The second version, the TPSM8282xA, runs in forced-PWM maintaining a continuous conduction mode at all currents to minimize the output ripple. In PWM mode the converter operates with a nominal switching frequency of 4MHz.

In power save mode, the device operates with typically 4-µA quiescent current. Using the DCS-Control topology, the device achieves excellent load transient performance and accurate output voltage regulation. The EN and PG pins, which support sequencing configurations, bring a flexible system design. An integrated soft start-up reduces the inrush current required from the input supply. Overtemperature protection and hiccup short circuit protection deliver a robust and reliable solution.

filter

Buscar otro/a Módulos de potencia (inductor integrado)

Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new

Comparar alternativas

Pin por pin con la misma funcionalidad que el dispositivo comparado

TPSM82821

ACTIVO

Módulo reductor de 1 A con entrada de 5.5 V con inductor integrado en μSIP de 2 × 2.5 × 1.1 mm Lower output current module alternative.

TPSM82822A

ACTIVO

Convertidor reductor, ENT de 5.5 V, 2 A, c/ inductor integrado, modo PWM forzado, encapsulado µSiP Drop-in alternative with forced-PWM operation.

Funcionalidad similar a la del dispositivo comparado

TPSM82813

ACTIVO

Módulo reductor de 3 A y 6 V con sincronización de frecuencia opcional, arranque suave ajustable y s Low-noise fixed frequency operation, frequency synchronization, adjustable soft start and more.

TPSM82823

ACTIVO

Módulo reductor de 3 A con entrada de 5.5 V con inductor integrado en uSiP de 2.0 × 2.5 × 1.1 mm Forced-PWM operation and 23-mm² total BOM size.

Documentación técnica

star

=Principal documentación para este producto seleccionada por TI

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.

Ver todo 19

Documentación principal	Tipo	Título	Opciones de formato	Fecha
*	Data sheet	TPSM8282x, TPSM8282xA 1-A, 2-A, and 3-A High Efficiency Step-Down Converter MicroSiP™ Power Module with Integrated Inductor datasheet (Rev. F)	PDF \| HTML	22 nov 2021
	Application note	QFN and SON PCB Attachment (Rev. C)	PDF \| HTML	06 dic 2023
	Application note	Quick Reference Guide To TI Buck Switching DC/DC Application Notes (Rev. B)	PDF \| HTML	23 may 2022
	User guide	TPSM8282xEVM-080 and TPSM8282xAEVM-127 Evaluation Modules User's Guide (Rev. D)	PDF \| HTML	12 nov 2021
	Functional safety information	TPSM8282x/A Pin Failure Mode Analysis (Pin FMA)	PDF \| HTML	27 sep 2021
	User guide	Manufacturing and Rework Design Guide for MicroSiP™ Power Modules (Rev. A)	PDF \| HTML	16 jun 2021
	White paper	Enabling Higher Data Rates for Optical Modules With Small and Efficient Power		22 mar 2021
	Application brief	Achieving High Thermal Performance in Compact Buck Power Modules	PDF \| HTML	24 feb 2021
	Analog Design Journal	Methods of output-voltage adjustment for DC/DC converters		14 jun 2019
	Application note	Performing Accurate PFM Mode Efficiency Measurements (Rev. A)		11 dic 2018
	Analog Design Journal	Understanding 100% mode in low-power DC/DC converters		22 jun 2018
	Analog Design Journal	Improving the thermal performance of a MicroSiP(TM) power module		24 jul 2017
	Application note	Extending the Soft Start Time Without a Soft Start Pin (Rev. B)		15 jun 2017
	Analog Design Journal	Testing tips for applying external power to supply outputs without an input voltage		24 oct 2016
	Analog Design Journal	Adjusting the soft-start time of an integrated power module		26 abr 2016
	Analog Design Journal	Understanding frequency variation in the DCS-Control(TM) topology		30 oct 2015
	Analog Design Journal	High-efficiency, low-ripple DCS-Control offers seamless PWM/pwr-save transitions		25 jul 2013
	Application note	Choosing an Appropriate Pull-up/Pull-down Resistor for Open Drain Outputs		19 sep 2011
	Analog Design Journal	IQ: What it is, what it isn’t, and how to use it		17 jun 2011

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

TPSM82822EVM-080 — Convertidor reductor de 2 A con módulo de evaluación de inductor integrado

El módulo de evaluación (EVM) TPSM82822EVM-080 está diseñado para ayudar al usuario a evaluar y probar fácilmente el funcionamiento y la funcionalidad del módulo de alimentación TPSM82822. El EVM convierte una tensión de entrada de 2.4 V a 5.5 V en una tensión de salida regulado de 1.8 V con una (...)

Guía del usuario: PDF | HTML