TPSM828301

Name: TPSM828301
Brand: TI
SKU: TPSM828301
Price: 1.035 USD

ACTIVO

Módulo de alimentación reductor de alta eficiencia de 1 A y 2.25 V a 5.5 V con inductor integrado

Haga su pedido ahora

Hoja de datos

document-pdfAcrobat TPSM82830x, Low EMI, 2.25V to 5.5V input, 1A, 2A, and 3A Step-Down Power Modules With Integrated Inductor in QFN and MagPack Packages datasheet (Rev. C) (Inglés) PDF | HTML

TPSM828301

ACTIVO

Hoja de datos

Haga su pedido ahora

Detalles del producto

Rating

Catalog

Topology

Buck, Step-Down Converter, Synchronous Buck

Iout (max) (A)

1

Vin (max) (V)

5.5

Vin (min) (V)

2.25

Vout (max) (V)

4.5

Vout (min) (V)

0.5

Features

1.2-V compatible control inputs, EMI Tested, Enable, Light Load Efficiency, Output discharge, Overcurrent protection, Power good

EMI features

Integrated capacitors, Low parasitic Hotrod packaging

Operating temperature range (°C)

-40 to 125

Type

Converter (Integrated Switch), DC/DC converter, Module

Duty cycle (max) (%)

100

Control mode

COT, Constant on-time (COT), DCS-Control

Switching frequency (min) (kHz)

2200

Switching frequency (max) (kHz)

2000

Rating

Catalog

Topology

Buck, Step-Down Converter, Synchronous Buck

Iout (max) (A)

1

Vin (max) (V)

5.5

Vin (min) (V)

2.25

Vout (max) (V)

4.5

Vout (min) (V)

0.5

Features

1.2-V compatible control inputs, EMI Tested, Enable, Light Load Efficiency, Output discharge, Overcurrent protection, Power good

EMI features

Integrated capacitors, Low parasitic Hotrod packaging

Operating temperature range (°C)

-40 to 125

Type

Converter (Integrated Switch), DC/DC converter, Module

Duty cycle (max) (%)

100

Control mode

COT, Constant on-time (COT), DCS-Control

Switching frequency (min) (kHz)

2200

Switching frequency (max) (kHz)

2000

QFN-FCMOD (RDS)

9

9 mm² 3 x 3

Optimized EMI performance
- Facilitates CISPR 11/32 compliance
- MagPack technology shields inductor and IC
- Integrated on-chip noise-filtering capacitors
0.5V to 4.5V adjustable output voltage
1% FB voltage accuracy (–40°C to 125°C TJ)
55mΩ dropout resistance
2.25V to 5.5V input voltage range
2.0MHz switching frequency
7µA operating quiescent current
DCS-Control topology
Excellent transient response
MODE pin selectable FPWM or PSM
Supports 1.2V GPIO
100% duty cycle for lowest dropout
Active output discharge
Power-good output
Thermal shutdown protection
Hiccup or latch-off OCP/OVP
Package options with no bondwires
- Standard QFN, 1.95mm height
- Shielded MagPack package, 1.95mm height
Create a custom design using the TPSM828303 with the WEBENCH® Power Designer

Optimized EMI performance
- Facilitates CISPR 11/32 compliance
- MagPack technology shields inductor and IC
- Integrated on-chip noise-filtering capacitors
0.5V to 4.5V adjustable output voltage
1% FB voltage accuracy (–40°C to 125°C TJ)
55mΩ dropout resistance
2.25V to 5.5V input voltage range
2.0MHz switching frequency
7µA operating quiescent current
DCS-Control topology
Excellent transient response
MODE pin selectable FPWM or PSM
Supports 1.2V GPIO
100% duty cycle for lowest dropout
Active output discharge
Power-good output
Thermal shutdown protection
Hiccup or latch-off OCP/OVP
Package options with no bondwires
- Standard QFN, 1.95mm height
- Shielded MagPack package, 1.95mm height
Create a custom design using the TPSM828303 with the WEBENCH® Power Designer

The TPSM82830x are a family of 1A, 2A, and 3A, pin-to-pin compatible, easy-to-use, synchronous, step-down, DC/DC modules with integrated inductor and EMI reduction technologies. The devices use DCS-Control topology for fast transient response with small output capacitance. The output voltage can be set down to 0.5V with high feedback voltage accuracy of 1% over the full operating junction temperature range. A mode pin selects between power saving and forced-PWM mode. The power save mode is for longer battery life and the forced PWM mode reduces ripple with continuous conduction in the inductor at a quasi fixed switching frequency. An internal soft-start circuit reduces inrush current and a power-good signal indicates correct output voltage. HICCUP short-circuit protection combined with thermal shutdown protect device and application. The family is available in a 3.0mm × 3.0mm QFN package and in the 2.5mm × 2.6mm MagPack package.

filter

Buscar otro/a Módulos de potencia (inductor integrado)

Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new

Comparar alternativas

Pin por pin con la misma funcionalidad que el dispositivo comparado

TPSM828302

ACTIVO

Módulo de alimentación reductor de alta eficiencia de 2 A y 2.25 V a 5.5 V con inductor integrado Higher output current alternative

Funcionalidad similar a la del dispositivo comparado

TPSM82821

ACTIVO

Módulo reductor de 1 A con entrada de 5.5 V con inductor integrado en μSIP de 2 × 2.5 × 1.1 mm 1-A step-down module in a smaller 2 mm x 2.5 mm MicroSiP package

Documentación técnica

star

=Principal documentación para este producto seleccionada por TI

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.

Ver todo 2

	Tipo	Título		Fecha
*	Data sheet	TPSM82830x, Low EMI, 2.25V to 5.5V input, 1A, 2A, and 3A Step-Down Power Modules With Integrated Inductor in QFN and MagPack Packages datasheet (Rev. C)	PDF \| HTML	11 abr 2025
	Certificate	TPSM828301AEVM-245 EU Declaration of Conformity (DoC)		26 jul 2023

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

TPSM828301AEVM-245 — Módulo de evaluación TPSM828301 para módulo convertidor reductor 1 A con inductor integrado

El módulo de evaluación (EVM) TPSM828301AEVM-245 facilita la evaluación del TPSM828301, un módulo de potencia reductor de 1.0 A con inductor integrado en un encapsulado plano cuádruple sin plomo (QFN) de 3.0 mm × 3.0 mm × 2.0 mm. La EVM convierte una tensión de entrada de 2.25 V a 5.5 V en una (...)

Guía del usuario: PDF | HTML