Inicio Administración de potencia Reguladores de conmutación CA/CC Controladores de CA/CC

UCC28063

ACTIVO

Controlador PFC intercalado natural con modo de transición con inmunidad acústica al ruido mejorada

Se encuentra disponible una versión más nueva de este producto

open-in-new Comparar alternativas
Misma funcionalidad con diferente configuración de pines que el dispositivo comparado
UCC28065 ACTIVO Controlador PFC con modo de transición natural Interleaving™ con conmutación de alta frecuencia The UCC28065 is a high-frequency PFC which can reduce the inductor volume by up to 50%

Detalles del producto

Topology Boost, PFC controller Control mode TM Features > 750 W applications, Brown Out, Enable, Interleaved, Overvoltage protection, Peak current mode, Transition Control Mode Duty cycle (max) (%) 99
Topology Boost, PFC controller Control mode TM Features > 750 W applications, Brown Out, Enable, Interleaved, Overvoltage protection, Peak current mode, Transition Control Mode Duty cycle (max) (%) 99
SOIC (D) 16 59.4 mm² (9.9 mm × 6 mm)
  • Input filter and output capacitor ripple-current cancellation
    • Reduced current ripple for higher system reliability and smaller bulk capacitor
    • Reduced EMI filter size
  • Phase management capability
  • Fail-safe OVP with dual paths prevents output overvoltage conditions by voltage-sensing failures
  • Sensorless current-shaping simplifies board layout and improves efficiency
  • Advanced audible noise performance
  • Non-linear error-amplifier gain
  • Soft recovery on overvoltage
  • Integrated brownout and dropout handling
  • Reduced bias currents
  • Improved efficiency and design flexibility over traditional single-phase continuous conduction mode (CCM)
  • Inrush-safe current limiting:
    • Prevents MOSFET conduction during inrush
    • Eliminates reverse recovery events in output rectifiers
  • Enables use of low-cost diodes without extensive snubber circuitry
  • Improved light-load efficiency
  • Fast, smooth transient response
  • Expanded system-level protections
  • 1A Source/1.8A sink gate drivers
  • –40°C to 125°C Operating Temperature Range in a 16-Lead SOIC Package
  • Input filter and output capacitor ripple-current cancellation
    • Reduced current ripple for higher system reliability and smaller bulk capacitor
    • Reduced EMI filter size
  • Phase management capability
  • Fail-safe OVP with dual paths prevents output overvoltage conditions by voltage-sensing failures
  • Sensorless current-shaping simplifies board layout and improves efficiency
  • Advanced audible noise performance
  • Non-linear error-amplifier gain
  • Soft recovery on overvoltage
  • Integrated brownout and dropout handling
  • Reduced bias currents
  • Improved efficiency and design flexibility over traditional single-phase continuous conduction mode (CCM)
  • Inrush-safe current limiting:
    • Prevents MOSFET conduction during inrush
    • Eliminates reverse recovery events in output rectifiers
  • Enables use of low-cost diodes without extensive snubber circuitry
  • Improved light-load efficiency
  • Fast, smooth transient response
  • Expanded system-level protections
  • 1A Source/1.8A sink gate drivers
  • –40°C to 125°C Operating Temperature Range in a 16-Lead SOIC Package

Optimized for consumer applications concerned with audible noise elimination, this solution extends the advantages of transition mode – high efficiency with low-cost components – to higher power ratings than previously possible. By utilizing a Natural Interleaving™ technique, both channels operate as masters (that is, there is no slave channel) synchronized to the same frequency. This approach delivers inherently strong matching, faster responses, and ensures that each channel operates in transition mode.

Expanded system level protections feature input brownout and dropout recovery, output over-voltage, open-loop, overload, soft-start, phase-fail detection, and thermal shutdown. The additional FailSafe over-voltage protection (OVP) feature protects against shorts to an intermediate voltage that, if undetected, could lead to catastrophic device failure. Advanced non-linear gain results in rapid, yet smoother response to line and load transient events. Reduced bias currents improve stand-by power efficiency. Special line-dropout handling avoids significant current disruption and minimizes audible-noise generation.

Optimized for consumer applications concerned with audible noise elimination, this solution extends the advantages of transition mode – high efficiency with low-cost components – to higher power ratings than previously possible. By utilizing a Natural Interleaving™ technique, both channels operate as masters (that is, there is no slave channel) synchronized to the same frequency. This approach delivers inherently strong matching, faster responses, and ensures that each channel operates in transition mode.

Expanded system level protections feature input brownout and dropout recovery, output over-voltage, open-loop, overload, soft-start, phase-fail detection, and thermal shutdown. The additional FailSafe over-voltage protection (OVP) feature protects against shorts to an intermediate voltage that, if undetected, could lead to catastrophic device failure. Advanced non-linear gain results in rapid, yet smoother response to line and load transient events. Reduced bias currents improve stand-by power efficiency. Special line-dropout handling avoids significant current disruption and minimizes audible-noise generation.

Descargar Ver vídeo con transcripción Video

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 6
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos UCC28063 Natural Interleaving™ Transition-Mode PFC Controller With Improved Audible Noise Immunity datasheet (Rev. C) PDF | HTML 30/07/2024
Nota sobre la aplicación UCC2806x PCB Layout Guideline for PFC 29/04/2019
Guía de selección Power Management Guide 2018 (Rev. R) 25/06/2018
Nota sobre la aplicación Applying External Phase Control Circuit for UCC28063 27/10/2017
Artículo técnico Is PFC possible without input voltage sensing? PDF | HTML 14/09/2016
Informe An Interleaved PFC Preregulator for High-Power Converters 28/04/2015

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

UCC28063EVM-723 — Módulo de evaluación UCC28063 de controlador PFC intercalado natural con modo de transición

El UCC28063EVM-723 (EVM) es un circuito completamente ensamblado y probado para evaluar el controlador PFC de modo de transición Natural Interleaving™ UCC28063. El UCC28063EVM-723 es un prerregulador PFC de 300 W fuera de línea que funciona con una entrada de línea universal de 85 V a 265 V RMS y (...)
Guía del usuario: PDF
Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
Modelo de simulación

UCC28063 PSpice Transient Model

SLUM207.ZIP (74 KB) - Modelo PSpice
Productos y hardware compatibles
Herramienta de cálculo

SLUC292 — UCC28063 Controller Setup Tool

Productos y hardware compatibles
Diseño de referencia

PMP10948 — Diseño de referencia de fuente de alimentación CA/CC de alta eficiencia y alto factor de potencia de

PMP10948 is a high-efficiency, high power factor AC/DC power supply reference design using UCC28063 interleaved transition-mode PFC controllers. There are two PFC stages in this design, 750W output power generates from one of the PFC stages and 550W output power generates from the other PFC stage. (...)

Productos y hardware compatibles
Diseño de referencia

PMP11282 — Diseño de referencia de fuente de alimentación de CA/CC de alta eficiencia de 410 W

PMP11282 is a high-efficiency AC/DC power supply reference design with universal AC input and 24V/17A output. Interleaved transition mode PFC and LLC series resonant converter is applied for 24V/17A main power. A PSR Flyback with MOSFET integrated controller is applied as the auxiliary supply. (...)

Productos y hardware compatibles
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
SOIC (D) 16 Ultra Librarian

Pedidos y calidad

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos